NHTSA owner reports · September 18, 2026 snapshot.
Engine complaints
27 reportsClear category filterMileage unknown · Feb 7, 2018
EnginePower Train
TL* THE CONTACT OWNS A 2015 RAM 3500. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBERS: 17V562000 (ENGINE AND ENGINE COOLING) AND 17V821000 (POWER TRAIN) AND STATED THAT THE PART WAS NOT AVAILABLE WITHIN A REASONABLE TIME FRAME TO SCHEDULE THE RECALL REPAIR. THE DEALER (GREENWAY DODGE CHRYSLER JEEP RAM ORLANDO, 9051 E…
Read full complaint
TL* THE CONTACT OWNS A 2015 RAM 3500. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBERS: 17V562000 (ENGINE AND ENGINE COOLING) AND 17V821000 (POWER TRAIN) AND STATED THAT THE PART WAS NOT AVAILABLE WITHIN A REASONABLE TIME FRAME TO SCHEDULE THE RECALL REPAIR. THE DEALER (GREENWAY DODGE CHRYSLER JEEP RAM ORLANDO, 9051 E COLONIAL DR, ORLANDO, FL 32817, (888) 292-3985) WAS UNABLE TO VERIFY WHEN THE REMEDY AND PARTS WOULD BE SUPPLIED FROM THE MANUFACTURER. THE CONTACT WAS UNABLE TO DETERMINE WHEN THE VEHICLE WOULD BE REPAIRED. THE MANUFACTURER WAS CONTACTED. THE CONTACT STATED THAT THE SERVICE ENGINE INDICATOR ILLUMINATED. THE FAILURE MILEAGE WAS NOT AVAILABLE. PARTS DISTRIBUTION DISCONNECT. *TT UPDATED 10/1/18*JB
NHTSA ODI #11067419
110,000 miles · Jan 19, 2018
EngineFire
MY DODGE RAM TRUCK WAS THE SUBJECT OF THREE SAFETY RECALLS, TWO OF WHICH WERE COMPLETED DECEMBER 12, 2018. A THIRD SAFETY RECALL, T25/NHTSA 17V-302, THAT, AT THE TIME OF MY FIRE INCIDENT, HAD NOT BEEN APPROVED BY CHRYSLER FOR THE WORK TO BE DONE. THE TWO SAFETY RECALLS WERE COMPLETED BY A DEALER APPROXIMATELY 80 MILES AWAY FRO…
Read full complaint
MY DODGE RAM TRUCK WAS THE SUBJECT OF THREE SAFETY RECALLS, TWO OF WHICH WERE COMPLETED DECEMBER 12, 2018. A THIRD SAFETY RECALL, T25/NHTSA 17V-302, THAT, AT THE TIME OF MY FIRE INCIDENT, HAD NOT BEEN APPROVED BY CHRYSLER FOR THE WORK TO BE DONE. THE TWO SAFETY RECALLS WERE COMPLETED BY A DEALER APPROXIMATELY 80 MILES AWAY FROM MY HOME. ON THE DAY AFTER PICKING UP MY TRUCK, THE TRUCK'S ENGINE COMPARTMENT HAD A FIRE DURING MY 1-MILE DRIVE HOME FROM WORK. I OBSERVED SMOKE COMING FROM UNDER THE HOOD, TURNED OFF THE MOTOR, OPENED THE HOOD AND OBSERVED FLAMES. MY LOCAL FIRE DEPARTMENT RESPONDED TO THE SCENE, BUT I HAD ALREADY EXTINGUISHED THE FIRE. I NOTIFIED CHRYSLER AND THEY SUBSEQUENTLY DISPATCHED AN INVESTIGATOR TO MY HOME TO CONDUCT AN EVALUATION. ON JANUARY 3, 2018, THE INVESTIGATOR MET WITH ME AND PHOTOGRAPHED MY DAMAGED ENGINE COMPARTMENT. THE INVESTIGATOR HAD EARLIER INFORMED ME THAT CHRYSLER WOULD NOT PAY FOR THE TOW TO A DEALERSHIP WHERE A PROPER EVALUATION COULD TAKE PLACE. THE SAFETY RECALL INDICATED THAT, FOR MY MODEL AND YEAR OF TRUCK, THE WATER PUMP COULD FAIL AND "MAY" CAUSE A FIRE IN THE ENGINE COMPARTMENT. TODAY, JANUARY 19, 2018, I RECEIVED A LETTER FROM FIAT CHRYSLER AUTOMOBILES INFORMING ME THAT AFTER THEIR INSPECTION OF MY VEHICLE, "THE INFORMATION AT HAND WOULD NOT PERMIT US TO ASSOCIATE THE FIRE WITH A MANUFACTURING OR ASSEMBLY ERROR..." THEIR EVALUATION PROCEDURE WAS HAPHAZARD, AT BEST, AND HANDLED IN A VERY POOR MANNER. I ASKED THE EVALUATOR ABOUT HIS PROFESSIONAL BACKGROUND, AND HE WAS NOT AN ENGINEER, OR A MECHANIC. HE SIMPLY OBTAINED PHOTOGRAPHS FOR HIS REPORT. I DO NOT UNDERSTAND HOW CHRYSLER COULD MAKE A REASONED DECISION IN THIS MATTER WITHOUT A PROPER EVALUATION BY A TRAINED ENGINEER OR MECHANIC. THANK YOU FOR YOUR TIME AND CONSIDERATION. *BF *TR
NHTSA ODI #11063835
50,000 miles · Jan 3, 2018
Electrical SystemEngine
VEHICLE FAILS TO START IN COLD WEATHER BELOW 55 DEGREES. WHEN IT IS BELOW 55 DEGREES, THE WIN MODULE WILL NOT RECOGNIZE THE KEY FOB AND VEHICLE WILL NOT START. I MUST KEEP INSERTING THE KEY FOB, TURN IT OFF AND ON, RECYCLE DOOR LOCKS, OPEN AND CLOSE DOOR. I HAVE BROUGHT THIS TO THE DEALER. NO PARTS AVAILABLE. BROUGHT IT TO CHRYS…
Read full complaint
VEHICLE FAILS TO START IN COLD WEATHER BELOW 55 DEGREES. WHEN IT IS BELOW 55 DEGREES, THE WIN MODULE WILL NOT RECOGNIZE THE KEY FOB AND VEHICLE WILL NOT START. I MUST KEEP INSERTING THE KEY FOB, TURN IT OFF AND ON, RECYCLE DOOR LOCKS, OPEN AND CLOSE DOOR. I HAVE BROUGHT THIS TO THE DEALER. NO PARTS AVAILABLE. BROUGHT IT TO CHRYSLER'S ATTENTION, NO REPAIRS OR PARTS. IF I NEEDED TO GO ANYWHERE IN AN EMERGENCY, IT WOULD BE IMPOSSIBLE. ATTACHING VIDEO OF WHAT I GO THROUGH. WOULD LIKE TO KNOW WHY CHRYSLER DOES NOT HAVE PARTS NOR ARE THEY REPLACING DEFECTIVE PARTS UNDER WARRANTY. WEB SITE IS NOT ALLOWING ME TO UPLOAD A VIDEO OF THE PROBLEM
NHTSA ODI #11058199
57,000 miles · Dec 27, 2017
Engine
MANUFACTURERS FAILED TO REMEDY A RECALL FOR THE WATER PUMP IN A TIMELY MANNER.
NHTSA ODI #11056735
40,000 miles · Nov 10, 2017
EnginePower Train
BOUGHT TRUCK NEW AND AT 40K MILE MARK WATER PUMP ASSEMBY FAILED WHILE DRIVING ON HIGHWAY AT 75 MPH TOWING CAMPER,ALMOST CRASHED,LOST STEERING & CONTROL, TRUCK ALMOST CAUGHT FIRE, WAS SO HOT, STEEMING & SMOKING , MECHANIC COULDNT TOUCH HOOD FOR 45 MINUTES. STRANDED FOR A WEEK BEFORE FIXED-NOW AT THE 80K MILE MARK RE-CALL CAME…
Read full complaint
BOUGHT TRUCK NEW AND AT 40K MILE MARK WATER PUMP ASSEMBY FAILED WHILE DRIVING ON HIGHWAY AT 75 MPH TOWING CAMPER,ALMOST CRASHED,LOST STEERING & CONTROL, TRUCK ALMOST CAUGHT FIRE, WAS SO HOT, STEEMING & SMOKING , MECHANIC COULDNT TOUCH HOOD FOR 45 MINUTES. STRANDED FOR A WEEK BEFORE FIXED-NOW AT THE 80K MILE MARK RE-CALL CAME OUT FOR EXACT PROBLEM AND NOW THERES NO FIX AVAILABLE ? ROLLING THE DICE WITH MANY LIVES ! AFRAID TO DRIVE THE VEHICLE. ALL MY ISSUES DOCUMENTED AT CHRYSLER CARE. I CAN NOT BELIEVE THEY ARE LETTING PEOPLE DRIVE THIS VEHICLE WITH NO FIX ....I NEED HELP AS WELL AS ALL WHO OWN THIS VEHICLE ORIGINAL ACCIDENT HAPPEND 3/2016
NHTSA ODI #11045092
36,500 miles · Nov 7, 2017
Engine
IF YOU LET UP ON THE THROTTLE FOR A TRAFFIC ISSUE AND PRESS IT BACK DOWN QUICKLY THE THROTTLE RESPONSE GOES DEAD FOR 1-2 SECONDS. THIS A REAL SAFETY ISSUE IN LEFT TURNS AND/OR MERGING INTO TRAFFIC. AKA DEAD PEDAL, WHICH IS WELL DOCUMENTED ON INTERNET SITES ASSOCIATED WITH RAM DIESEL PICKUPS.
NHTSA ODI #11044385
Mileage unknown · Nov 3, 2017
EngineFuel/propulsion System
THERE IS A DEFINITE DELAY IN ACCELERATION WHEN PULLING OUT IN TRAFFIC. SOMETIMES 2 OR 3 SECONDS OR MORE. ALSO WHEN DRIVING IN TRAFFIC IF YOU LET UP ON THE ACCELERATOR AND THEN RESUME ACCELERATING IT ALMOST FEELS LIKE THE VEHICLE STALLS. VERY DANGEROUS.
NHTSA ODI #11043024
23,365 miles · May 10, 2017
EngineFuel/propulsion SystemPower Train
WHEN ACCELERATING (EITHER FROM A STOP OR A ROLLING STOP) AND THEN BRAKING AND THEN ACCELERATING AGAIN, THE ENGINE WILL HESITATE. SOME CALL THIS "DEAD PEDAL" BUT I FEEL IT'S DANGEROUS BECAUSE IT LEAVES VULNERABLE IN TRAFFIC TO A COLLISION. IT'S HAPPENED TO ME NUMEROUS TIMES AND AGAIN TODAY. I WAS AT A 4 WAY STOP AND PROCEEDED …
Read full complaint
WHEN ACCELERATING (EITHER FROM A STOP OR A ROLLING STOP) AND THEN BRAKING AND THEN ACCELERATING AGAIN, THE ENGINE WILL HESITATE. SOME CALL THIS "DEAD PEDAL" BUT I FEEL IT'S DANGEROUS BECAUSE IT LEAVES VULNERABLE IN TRAFFIC TO A COLLISION. IT'S HAPPENED TO ME NUMEROUS TIMES AND AGAIN TODAY. I WAS AT A 4 WAY STOP AND PROCEEDED TO ACCELERATE WHEN IT WAS MY TURN, ABOUT 1/3 WAY INTO THE INTERSECTION, A VEHICLE TRAFFIC IGNORED THE STOP SIGN AND ATTEMPTED TO CROSS MY LINE OF TRAVEL. I HAD TO BREAK AND THEN IMMEDIATELY ACCELERATE AND THE TRUCK HESITATED WHICH LEFT ME IN THE INTERSECTION. IF THE OTHER VEHICLE HAD BEEN TRAVELING AT A FASTER RATE, IT WOULD HAVE T-BONED ME. AS IT WAS, THE OTHER DRIVER WAS ABLE TO MANEUVER HIS VEHICLE AROUND ME. TO ME, THIS ISN'T A DELAY IN WHICH THE TURBO SPOOLS UP TO HELP DELIVER POWER. IT ALMOST FEELS LIKE THE THROTTLE IS DEAD HOWEVER THE TRUCK IS STILL RUNNING. THE HESITATION CAN LAST ABOUT A SECOND OR SO BUT IN THAT TIME, I FEEL THE TRUCK IS UNSAFE.
NHTSA ODI #10984671
Mileage unknown · Jan 2, 2017
Electrical SystemEngineService Brakes
TOO MANY DETAILS, BUT WILL TRY TO BULLET RIGHT TO THE ISSUES: (TRUCK WAS REAR ENDED ON HIGHWAY 4/25/2016) -MY TRUCK WAS TOWED TO DEALERSHIP, BUT UPON "COMPLETED REPAIRS", I PICKED UP AT COLLISION CENTER -EXHAUST BRAKE FUNCTION ON THE TURBO WAS WEAKENED WHILE IN CARE OF DEALERSHIPS HANDS (OR LACK THEREOF) -DURING REPAIRS OF B…
Read full complaint
TOO MANY DETAILS, BUT WILL TRY TO BULLET RIGHT TO THE ISSUES: (TRUCK WAS REAR ENDED ON HIGHWAY 4/25/2016) -MY TRUCK WAS TOWED TO DEALERSHIP, BUT UPON "COMPLETED REPAIRS", I PICKED UP AT COLLISION CENTER -EXHAUST BRAKE FUNCTION ON THE TURBO WAS WEAKENED WHILE IN CARE OF DEALERSHIPS HANDS (OR LACK THEREOF) -DURING REPAIRS OF BODY DAMAGE ONLY, SOMEONE RE-CALIBRATED MY TRUCKS SPEEDOMETER TO MATCH MY OVERSIZE TIRES. (THIS WOULD BE SO MUCH A CONCERN, BUT THE FACT THAT MY TRUCKS EXHAUST BRAKE WAS INTENTIONALLY WEAKENED VIA COMPUTER, "NOW WE HAVE A PROBLEM" -THIS ISSUE WAS ADDRESSED TO DEALERSHIP AS A SAFETY CONCERN AS I TOW A 16,000LB TRAILER FOR WORK. (ALONG WITH NOTICEABLE WHISTLE FROM TURBO, WHICH IS UNDENIABLE EVIDENCE OF DAMAGE TO TURBO) -FIRST DAY TOWING THROUGH MOUNTAINS "WITHOUT" EB WORKING PROPERLY, I ALMOST WRECK TWICE WITHIN 15 MILES, ALL DUE TO "WEAK EB" -AFTER MULTIPLE TRIPS TO DEALER, I AM CONSTANTLY TOLD "TRUCK DRIVES FINE, TRUCK EB IS WORKING" -ENOUGH RESEARCHING TURBO AND EB FUNCTION, I AM ABLE TO FINALLY GET INSURANCE & DEALERSHIP TO REPAIR TURBO UNDER CLAIM -AFTER REPAIR, TRUCK IS GIVEN BACK TO ME WITH NEW TURBO. EB IS STILL EXTREMELY WEAK, WHISTLE IS GONE, TORQUE AND TOW/HAUL FUNCTION HAVE NOW BEEN ALTERED AND COMPROMISED. -NOW WE HAVE 3 ISSUES WITH THE TRUCK: EXTREMELY WEAK EB / EXTREMELY WEAK TO NON-EXISTENT TOW/HAUL MODE / TORQUE EXTREMELY WEAK. (ALL FUNCTIONS THAT CAN BE CALIBRATED IN THE TRUCKS COMPUTER) -DEALERSHIP HAS BEEN HAVING MY $60,000 TRUCK HANDLED WITH COMPLETE NEGLIGENCE AND CARELESSNESS WITH PLACING REPAIRS IN HANDS OF A MECHANIC WITH 2 MONTHS' EXPERIENCE. -2ND DEALERSHIP NOW, WOULDN'T LISTEN ABOUT COMPUTER CONCERNS, REPLACED MY NEW TURBO INSTEAD. -WORDS BY SECOND DEALERSHIP "TRUCK IS WORKING AS DESIGNED". A TOW TRUCK THAT DOES NOT HAVE ITS "TOW/HAUL" ENGAGING IS NOT WORKING AS DESIGNED. "ACCIDENT WAITING TO HAPPEN" *TR
NHTSA ODI #10939130
10,000 miles · Dec 20, 2016
EngineSuspension
MY 2015 RAM 3500 HAS GONE THROUGH 3 WHEEL ALIGNMENT WITHIN A YEAR 12000 MILES. I ALSO BEEN GETTING A LOT OF BAD FUMES IN CAB WHERE YOU HAVE TO OPEN WINDOWS AT AROUND 20 TO 40 MPH OR WHEN YOU START TRUCK WHILE WARMING UP IN COLD WEATHER. I HAD WHEELS ROTATED AND THE TPMS WHERE READING WRONG. IT WAS NOT CONNECTING WITH SYSTEM IN…
Read full complaint
MY 2015 RAM 3500 HAS GONE THROUGH 3 WHEEL ALIGNMENT WITHIN A YEAR 12000 MILES. I ALSO BEEN GETTING A LOT OF BAD FUMES IN CAB WHERE YOU HAVE TO OPEN WINDOWS AT AROUND 20 TO 40 MPH OR WHEN YOU START TRUCK WHILE WARMING UP IN COLD WEATHER. I HAD WHEELS ROTATED AND THE TPMS WHERE READING WRONG. IT WAS NOT CONNECTING WITH SYSTEM IN TRUCK HAD TO TAKE TO DEALER TO RESET.
NHTSA ODI #10936561
Official recalls
14Aug 12, 2021
Chrysler (FCA US, LLC) is recalling certain 2015-2020 Ram 1500 Classic, 2015-2016 Ram 3500, and Ram 2500 vehicles, and 2016 Ram 3500 Cab Chassis with a gross vehicle weight rating less than 10,000 lbs. The side air bag inflatable curtain (SABIC) inflator end cap may detach from the inflator, or the inflator sidewall may rupture.
Consequence & remedy
Consequence: A separated inflator end cap or inflator rupture can allow compressed gas to escape, resulting in the end cap or other components being propelled into the vehicle, increasing the risk of injury or crash.
Remedy: Dealers will inspect and replace as necessary, the SABIC assemblies, free of charge. Interim owner notification letters were mailed on October 4, 2021. Owner notification letters were mailed on May 26, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Y55.
Additional source detail variants (2)
Air Bags:side/window:curtain:inflator
Chrysler (FCA US, LLC) is recalling certain 2015-2020 Ram 1500 Classic, 2015-2016 Ram 3500, and Ram 2500 vehicles, and 2016 Ram 3500 Cab Chassis with a gross vehicle weight rating less than 10,000 lbs. The side air bag inflatable curtain (SABIC) inflator end cap may detach from the inflator, or the inflator sidewall may rupture.
Consequence: A separated inflator end cap or inflator rupture can allow compressed gas to escape, resulting in the end cap or other components being propelled into the vehicle, increasing the risk of injury or crash.
Remedy: Dealers will inspect and replace as necessary, the SABIC assemblies, free of charge. Interim owner notification letters were mailed on October 4, 2021. Owner notification letters were mailed on May 26, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Y55.
Air Bags:side/window:curtain
Chrysler (FCA US, LLC) is recalling certain 2015-2020 Ram 1500 Classic, 2015-2016 Ram 3500, and Ram 2500 vehicles, and 2016 Ram 3500 Cab Chassis with a gross vehicle weight rating less than 10,000 lbs. The side air bag inflatable curtain (SABIC) inflator end cap may detach from the inflator, or the inflator sidewall may rupture.
Consequence: A separated inflator end cap or inflator rupture can allow compressed gas to escape, resulting in the end cap or other components being propelled into the vehicle, increasing the risk of injury or crash.
Remedy: Dealers will inspect and replace as necessary, the SABIC assemblies, free of charge. Interim owner notification letters were mailed on October 4, 2021. Owner notification letters were mailed on May 26, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Y55.
May 27, 2021
Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.
Consequence & remedy
Consequence: Wheel separation can cause a vehicle crash.
Remedy: Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.
May 9, 2019
Chrysler (FCA US LLC) is recalling certain 2015-2017 Ram 1500, 2500 and 3500 pickup trucks equipped with an 8 foot bed and a power locking tailgate. Chrysler is also recalling all 2013-2014 and 2018 Ram 1500, 2500 and 3500 pickup trucks built before April 1, 2018 with a 6 or 8 foot bed and a power locking tailgate. On August 29, 2019 Chrysler expanded the recall to include an additional 693,128 model year 2013-2014 Ram 1500, 2500 and 3500 pickup trucks. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving.
Consequence & remedy
Consequence: If the tailgate opens while the vehicle is being driven, cargo may fall out the vehicle and create a road hazard, increasing the risk of crash.
Remedy: Chrysler will notify owners, and dealers will repair the tailgate latch, free of charge. The recall began May 23, 2019. Chrysler is expected to notify owners of the expanded population on October 18, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's number for this recall is V44. Note: 2015-2017 MY Ram 1500 pickup trucks with truck beds other than 8 foot, are currently covered under NHTSA recall 18V-486 for this issue.
Jan 25, 2019
Chrysler (FCA US LLC) is recalling certain 2013-2018 Ram 3500 and 2014-2018 Ram 3500 Chassis Cab and Ram 2500 vehicles. The outboard steering linkage jam nut may loosen, allowing one end of the drag link to separate.
Consequence & remedy
Consequence: A drag link separation can cause a loss of steering control, increasing the risk of crash.
Remedy: Chrysler will notify owners, and dealers will check the steering linkage jam nut tightness, replacing the drag link assembly or welding the nut to the adjuster sleeve, free of charge. The recall began March 22, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V06.
Jul 27, 2018
Chrysler (FCA US LLC) is recalling certain 2015-2017 RAM 1500, 2500, and 3500 pickup trucks equipped with a power locking tailgate and either a 5 foot, 7 inch or 6 foot, 4 inch bed. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving.
Consequence & remedy
Consequence: If the tailgate latch releases and the tailgate opens while driving, cargo may fall out, creating a road hazard and increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will repair the vehicle, free of charge. The recall began September 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U74.
Additional source detail variants (2)
Latches/locks/linkages:tailgate:latch
Chrysler (FCA US LLC) is recalling certain 2015-2017 RAM 1500, 2500, and 3500 pickup trucks equipped with a power locking tailgate and either a 5 foot, 7 inch or 6 foot, 4 inch bed. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving.
Consequence: If the tailgate latch releases and the tailgate opens while driving, cargo may fall out, creating a road hazard and increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will repair the vehicle, free of charge. The recall began September 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U74.
Structure:body:tailgate
Chrysler (FCA US LLC) is recalling certain 2015-2017 RAM 1500, 2500, and 3500 pickup trucks equipped with a power locking tailgate and either a 5 foot, 7 inch or 6 foot, 4 inch bed. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving.
Consequence: If the tailgate latch releases and the tailgate opens while driving, cargo may fall out, creating a road hazard and increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will repair the vehicle, free of charge. The recall began September 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U74.
May 17, 2018
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence & remedy
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Additional source detail variants (3)
Electrical System:software
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Vehicle Speed Control:cruise Control
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Electrical System:wiring
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Dec 20, 2017
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Consequence & remedy
Consequence: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy: Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Sep 12, 2017
Chrysler (FCA US LLC) is recalling certain 2013-2017 RAM 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, equipped with Cummins 6.7L Turbo Diesel engines that have Concentric-brand water pumps without a vent hole. These water pumps may leak coolant.
Consequence & remedy
Consequence: The leaking water pump can increase the risk of an engine compartment fire.
Remedy: Chrysler will notify owners, and dealers will replace the water pumps, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T51.
Aug 10, 2017
Streetcar ORV LLC, dba American Expedition Vehicles (AEV) is recalling certain 2013-2017 RAM 2500 and 3500 heavy duty trucks, modified by AEV to be equipped with cast aluminum Katla 8.5" road wheels. The outer surface of the wheel may fracture, resulting in rapid air loss.
Consequence & remedy
Consequence: If the wheel fractures, a loss of vehicle control can occur, increasing the risk of a crash.
Remedy: AEV will notify owners, and dealers will replace the wheels with wheels of similar value, free of charge. The recall began on August 30, 2017. Owners may contact AEV customer service at 1-248-926-0256 extension 500.
May 9, 2017
Chrysler (FCA US LLC) is recalling certain model year 2013-2016 Ram 1500, Ram 2500, and 2014-2016 Ram 3500 vehicles. Certain driving conditions, such as driving off-road or debris striking the vehicle may cause the roll rate sensor to trigger a fault within the Occupant Restraint Controller (ORC). If this fault occurs, the rollover side curtain air bag and the seat belt pretensioner will be disabled from deploying.
Consequence & remedy
Consequence: If the rollover side curtain air bags and seat belt pretensioners are disabled, there is an increased risk of injury to the vehicle occupants in the event of a crash that necessitates activation of these safety systems.
Remedy: Chrysler will notify owners, and dealers will update the ORC software, free of charge. The recall began June 26, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T25.
Additional source detail variants (2)
Air Bags:side/window:curtain
Chrysler (FCA US LLC) is recalling certain model year 2013-2016 Ram 1500, Ram 2500, and 2014-2016 Ram 3500 vehicles. Certain driving conditions, such as driving off-road or debris striking the vehicle may cause the roll rate sensor to trigger a fault within the Occupant Restraint Controller (ORC). If this fault occurs, the rollover side curtain air bag and the seat belt pretensioner will be disabled from deploying.
Consequence: If the rollover side curtain air bags and seat belt pretensioners are disabled, there is an increased risk of injury to the vehicle occupants in the event of a crash that necessitates activation of these safety systems.
Remedy: Chrysler will notify owners, and dealers will update the ORC software, free of charge. The recall began June 26, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T25.
Air Bags
Chrysler (FCA US LLC) is recalling certain model year 2013-2016 Ram 1500, Ram 2500, and 2014-2016 Ram 3500 vehicles. Certain driving conditions, such as driving off-road or debris striking the vehicle may cause the roll rate sensor to trigger a fault within the Occupant Restraint Controller (ORC). If this fault occurs, the rollover side curtain air bag and the seat belt pretensioner will be disabled from deploying.
Consequence: If the rollover side curtain air bags and seat belt pretensioners are disabled, there is an increased risk of injury to the vehicle occupants in the event of a crash that necessitates activation of these safety systems.
Remedy: Chrysler will notify owners, and dealers will update the ORC software, free of charge. The recall began June 26, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T25.
Jul 26, 2016
Chrysler (FCA US LLC) is recalling certain model year 2015 RAM 2500 trucks, and RAM 3500 trucks and cab chassis. The affected vehicles may have inadequate welds securing the front track bar frame brackets, possibly resulting in the bracket components separating from the frame.
Consequence & remedy
Consequence: If the bracket components separate from the frame, the vehicle may have a reduced response to steering input, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will weld on a new track bar frame bracket or replace the frame of the vehicle, free of charge. The recall began on September 14, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S58.
Jul 23, 2015
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Ram 1500, 2500, 3500, 4500, and 5500, 2015 Chrysler 200, Chrysler 300, Dodge Charger, and Dodge Challenger, 2014-2015 Jeep Grand Cherokee, Cherokee, and Dodge Durango, and 2013-2015 Dodge Viper vehicles. The affected vehicles are equipped with radios that have software vulnerabilities that can allow third-party access to certain networked vehicle control systems.
Consequence & remedy
Consequence: Exploitation of the software vulnerability may result in unauthorized remote modification and control of certain vehicle systems, increasing the risk of a crash.
Remedy: Chrysler will notify and mail affected owners a USB drive that includes a software update that eliminates the vulnerability, free of charge. Optionally, owners may download the update to their own USB drive from http://www.driveuconnect.com/software-update/ or take their vehicle to a Chrysler dealer for immediate installation. In an effort to mitigate the effects of this security vulnerability, Chrysler has had the wireless service provider close the open cellular connection to the vehicle that provided unauthorized access to the vehicle network. This measure may not have been implemented on all vehicles and does not address access by other means that will be remedied by the software update. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R40.
Jul 22, 2015
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Ram 1500, 2500, and 3500 trucks manufactured June 20, 2012, to January 26, 2015. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt pre-tensioners may activate.
Consequence & remedy
Consequence: Air bags that unexpectedly deploy increase the risk of a crash or injury.
Remedy: Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on September 8, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R23.
Additional source detail variants (2)
Seat Belts
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Ram 1500, 2500, and 3500 trucks manufactured June 20, 2012, to January 26, 2015. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt pre-tensioners may activate.
Consequence: Air bags that unexpectedly deploy increase the risk of a crash or injury.
Remedy: Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on September 8, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R23.
Air Bags:side/window
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Ram 1500, 2500, and 3500 trucks manufactured June 20, 2012, to January 26, 2015. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt pre-tensioners may activate.
Consequence: Air bags that unexpectedly deploy increase the risk of a crash or injury.
Remedy: Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on September 8, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R23.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
4RQ25003 · Post Recall Remedy Brake Transmission Shift Interlock (btsi) Failure
Opened Jul 3, 2025 · No close date supplied
Status: open (inferred from source dates) · Power Train:automatic Transmission; Power Train:automatic Transmission:gear Position Indication (prndl)
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models include 1500, 2500, 3500, 4500, and 5500 trucks equipped with a column mounted shift lever.The failures of the BTSI described in the VOQs occurred on vehicles that had all previously been repaired under recall 17V-821 or 18V-100.Both recalls address a potential condition which can cause the BTSI locking pin to become stuck allowing the transmission to be shifted out of Park without depressing the brake pedal and/or without having a key in the ignition.Shifting the transmission out of Park when not having the brake pedal depressed can result in a vehicle rollaway. ODI is opening this Recall Query (RQ) to review the effectiveness of the 17V-821 and 18V-100 recall remedies, understand the root cause of additional vehicle rollaway incidents, and identify any other possible root cause that may affect the performance of the BTSI system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Power Train:automatic Transmission
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models include 1500, 2500, 3500, 4500, and 5500 trucks equipped with a column mounted shift lever.The failures of the BTSI described in the VOQs occurred on vehicles that had all previously been repaired under recall 17V-821 or 18V-100.Both recalls address a potential condition which can cause the BTSI locking pin to become stuck allowing the transmission to be shifted out of Park without depressing the brake pedal and/or without having a key in the ignition.Shifting the transmission out of Park when not having the brake pedal depressed can result in a vehicle rollaway. ODI is opening this Recall Query (RQ) to review the effectiveness of the 17V-821 and 18V-100 recall remedies, understand the root cause of additional vehicle rollaway incidents, and identify any other possible root cause that may affect the performance of the BTSI system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
Power Train:automatic Transmission:gear Position Indication (prndl)
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models include 1500, 2500, 3500, 4500, and 5500 trucks equipped with a column mounted shift lever.The failures of the BTSI described in the VOQs occurred on vehicles that had all previously been repaired under recall 17V-821 or 18V-100.Both recalls address a potential condition which can cause the BTSI locking pin to become stuck allowing the transmission to be shifted out of Park without depressing the brake pedal and/or without having a key in the ignition.Shifting the transmission out of Park when not having the brake pedal depressed can result in a vehicle rollaway. ODI is opening this Recall Query (RQ) to review the effectiveness of the 17V-821 and 18V-100 recall remedies, understand the root cause of additional vehicle rollaway incidents, and identify any other possible root cause that may affect the performance of the BTSI system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
EA19004 · Steering Loss Due To Linkage Separation
Opened Dec 1, 2019 · Closed Nov 20, 2025
Status: closed (inferred from source dates) · Steering:linkages:drag:link:connection
On December 17, 2018, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18016 to investigate alleged drag link failures in the steering system on model year (MY) 2015 and 2016 Ram 2500 trucks manufactured by FCA US, LLC (FCA). The drag link failures were found to be due to a safety defect with the steering linkage where the drag link adjustable connector (used to adjust the steering system), held in position by two opposing jam nuts, can loosen. The loosening of this part can lead to wear and deterioration of the threads and eventual separation of the drag link, causing loss of steering. During the course of PE18016, it was found that two styles of drag link were used by FCA on the subject vehicles. The subject vehicles consist of two drivetrain types including four-wheel drive (4WD) and two-wheel drive (2WD). The 4WD and 2WD trucks used drag links of differing design but both incorporated the same threaded connector. In January 2019 FCA issued recall 19V-021 to address a potential loss of steering control in certain Model Year (MY) 2013-2018 4WD RAM 2500 and 3500 trucks. The trucks using the 2WD style drag link were not included in the scope of recall 19V-021. ODI upgraded PE18016 to an Engineering Analysis EA19004 on December 12, 2019. The purpose of EA19004 was to investigate if the root cause of the safety defect addressed by recall 19V-201 also affected the 2WD trucks and evaluate FCA’s rationale for not including them. ODI also monitored incoming consumer complaints regarding the remedy associated with 19V-021 and evaluated the suitability and long-term effectiveness of the prescribed repair. In the Defect Information Report submitted for recall 19V-021, FCA stated that the outboard jam nut could loosen and result in damage to the threading of the steering drag link connector. This could cause a separation in the drag link resulting in a loss of steering control. FCA determined that only the 4WD style drag link was affected and did not recall trucks with the 2WD style drag link due to design differences that made it unsusceptible to this failure mode. The repair remedy called for the steering coupler to be tightened to the proper torque prior to the jam nut being spot welded to the coupler body. If the coupler has already become detached or correct torque cannot be obtained, the drag link is to be replaced with an updated unit that went into production on the MY2019 RAM trucks.This updated unit uses a clamp to secure the coupler in place of the jam nuts used on original style components. In order to determine if the 2WD drag link was susceptible to the same defect found on the 4WD vehicles, ODI requested that our Vehicle Research and Test Center (VRTC) conduct testing on both RAM 2500 4WD and 2WD trucks. This testing was to determine operating conditions that might lead to loosened jam nuts of the recalled 4WD design and recreate these conditions on the 2WD vehicles to discover whether the 2WD design would also experience the loosening defect. Results from VRTC’s dynamic testing indicated that when the jam nuts are significantly under-torqued, they may loosen further from regular vehicle operation on the 4WD vehicles. Further, VRTC testing does not refute FCA’s assertion that the failure mechanism does not exist in the 2WD steering system. At the time of this closing resume, ODI has only received two allegations of drag link separation on 2WDvehicles.Neither could be validated as resulting from loose jam nuts. Since the release of recall 19V-021 ODI has received consumer complaints regarding the appearance of the spot weld applied to the defective drag link and the inability to have the steering properly aligned after welding of the jam nut. In September 2023, FCA provided owners with a supplemental Vehicle Alignment Clarification notification that provided information on an updated alignment procedure. Regarding the spot weld remedy used on the 4WD vehicles, ODI is concerned about the remedy in that during an alignment by a non-dealer repair facility, the spot weld might not be replaced after the alignment. To date there is no complaint trend of post alignment drag link separations, weld failures or other safety related incidents on remedied vehicles. This investigation is being closed with no further action. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances.
PE18016 · Steering Loss Due To Linkage Separation
Opened Dec 17, 2018 · Closed Dec 12, 2019
Status: closed (inferred from source dates) · Steering:linkages:drag:link:connection
On December 17, 2018, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 18-016 to investigate the steering system on model year (MY) 2015 and 2016 Ram 2500 manufactured by FCA US, LLC (FCA). Four complaints were received alleging separation of the drag link, a steering linkage that connects between the right front steering knuckle and the pitman arm on the steering box output shaft. The failures were found to be at a threaded coupler within the drag link used for adjusting the length of the linkage during routine maintenance (alignment) of the steering system.Once separation occurs, turning the steering wheel has no effect, and there is no way for the driver to control or maintain the direction of the vehicle. During the investigation, it was determined that the same threaded coupler was used on two different drag link designs FCA manufactured on MY 2013-2018 Ram 2500 and 3500 pickups. FCA refers to the designs as either 4x2 or 4x4 style. In both designs, the coupler is prevented from turning on the drag link via two jam nuts that are tightened against the coupler. In its response to NHTSA's March 15, 2019, Information Request (IR) letter, FCA identified 48 incidents alleging separation of the steering linkage at the coupler resulting in a loss of steering control. Of those, 13 involved a crash, one of which resulted in an injury. All of the separations involved the 4x4 style drag link. Additionally, FCA's IR response refers to over 300 4x4 style equipped vehicles that experienced, or may have experienced loosening of one or more coupler jam nuts. On January 25, 2019, FCA submitted a Defect Information Report (DIR) initiating NHTSA Recall No. 19V-021. In its DIR, FCA stated that the outboard jam nut in certain MY 2013-2018 Ram 2500 and 3500 could loosen potentially resulting in damage to the coupler and/or drag link threading allowing one end of the drag link to separate. The DIR notes that drag link separation results in loss of steering control, which in turn can cause a crash without warning. FCA's DIR did not identify a root cause for the defect, however it posits that an improperly torqued outboard jam nut could loosen, and with long-term vehicle use, cause damage to the outer link bar and/or coupler threads due to relative motion between the two components. The scope of Recall 19V-021 included vehicles with the 4x4 style drag link only. Also discussed in its IR response, FCA noted that the 4x2 style drag link contains a design difference (the outboard portion of the drag link is straight while the 4x4 style contains a bend) which it suggests may result in differences in the mechanical (bending) loads presented at the coupler and jam nut interface. Moreover, the DIR states that While root cause of the 4x4 style defect has not been established, FCA US believes that bending loads on the drag link is, at least, a causal contributing factor. FCA notes it did not identify any reports alleging 4x2 style separation as well as only three reports of loosening of jam nuts, two of which resulted in loosening that provided obvious warning to the vehicle operator, indicating a different failure mode.NHTSA is upgrading this investigation to Engineering Analysis (EA) 19-004 in order to continue to monitor the subject 4x2 style vehicles for evidence of field failures. Additionally, in conjunction with NHTSA's Vehicle Research and Test Center, ODI intends to more thoroughly study potential root cause(s) of the 4x4 style defect mechanism, and if identified, will seek to determine if the 4x2 drag link is susceptible to the same mechanism(s). NHTSA will also evaluate the long-term suitability of the recall
RQ15004 · Software Security Vulnerability
Opened Jul 24, 2015 · Closed Jan 5, 2016
Status: closed (inferred from source dates) · Electrical System:software
On July 23, 2015, Fiat Chrysler Automobiles (FCA) launched Safety Recall 15V-461 to remedy security vulnerabilities in approximately 1.4 million model year (MY) 2013 through 2015 vehicles equipped with Uconnect head units (HU) 8.4A (RA3 radio) and 8.4AN (RA4 radio) manufactured by Harman International.On July 24, 2015, the Office of Defects Investigation (ODI) opened Recall Query, RQ 15-004, to investigate HU security vulnerabilities and remedy effectiveness in the recalled population and to determine whether similar units have been supplied for use in other FCA vehicles.In an August 11, 2015 letter, FCA submitted a second Part 573 safety recall report expanding the scope of the Uconnect RA4 model radio to include additional 7,810 MY 2015 Jeep Renegade vehicles manufactured from September 18, 2014 through June 25, 2015 (Recall 15V-508).Scope analysis indicated that Uconnect radios installed in FCA vehicles not included in recalls 15V-461 or 15V-508 (subject recalls) are not equipped with built-in cellular access or short range wireless communication features and, thus, do not contain the security vulnerabilities addressed by the subject recalls. SUBJECT VEHICLES: MY2014 through 2015 Dodge Durango, Jeep Grand Cherokee and Jeep Cherokee sport utility vehicles; MY2013 through 2015 Ram 1500, 2500, 3500 and 4500/5500 pickup trucks; MY2013 through 2015 Dodge Viper vehicles; and MY2015 Chrysler 200, 300, Jeep Renegade, Dodge Charger and Challenger vehicles.According to FCA, long and short range wireless vulnerabilities identified in the recalled vehicles could allow unauthorized third-party access to, and manipulation of, networked vehicle control systems.Successful exploitation of the vulnerabilities, coupled with reverse engineering of networked microprocessor control modules, could result in unauthorized manipulation of vehicle control systems. This unauthorized manipulation of vehicle controls and systems could expose the driver, vehicle occupants or other highway users to an increased risk of injury.FCA and its network provider, Sprint, conducted a nationwide campaign to block access to a radio communications port that was unintentionally left open.On July 27, 2015, short range wireless vulnerabilities were also blocked.Finally, third party security evaluation and regression testing identified vulnerabilities that were either remedied by Sprint or through updates to the FCA Uconnect software.ODI identified a total of 30 complaints or field reports on unique vehicles submitted by FCA (29) or received by NHTSA (1) alleging incidents of theft from a vehicle or anomalous performance that the owner alleged were caused by, or may have been caused by, remote hacking.Twenty-six (87%) of these reports were submitted after a magazine article was published on July 21, 2015, describing the remote hacking of an FCA vehicle by researchers who were able to affect the operation of various vehicle control systems, including the service brakes, steering, throttle and ignition.Most of the complaints involved vehicle systems that were not safety critical (e.g., complaints related to radio, navigation system, or air-conditioning control) and did not affect vehicle control.Three complaints reported engine stalls.One owner reported sudden unintended acceleration allegedly related to hacking.None of the complaints or field reports reviewed involved the steering and braking vehicle control effects demonstrated by the research hackers prior to the recall.There were no confirmed incidents of hacking in any of the records reviewed by ODI.The remedies completed by Sprint and FCA appear to have eliminated vulnerabilities that mi
Illustration