IllustrationBrake line has ruptured and complete failure of brakes. This is due to faulty rubber securing grommet that has become detached from the brake line, allowing the line to rub against the strut tower. Your driver front brake line has ruptured, and your passenger brake line is wearing thin and likely to follow suit and rupture soon.
2016 Porsche Macan
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Macan years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 6 of 24 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 10 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Steering. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports0 fire reports0 injury reports
What owners actually said
24 reportsI need to replace or dismiss this so i can list my car on turo.
A SAFETY RECALL NHTSA ID 21V-131 WAS ISSUED FOR OUR VEHICLE IN OCTOBER 2021 INVOLVING AIRBAG SENSORS FOR THE FRONT PASSENGER. SEVERAL ATTEMPTS TO HAVE THE DEALER ADDRESS THIS RECALL HAVE BEEN UNSUCCESSFUL AS THEY DO NOT HAVE THE PARTS TO REMEDY THE ISSUE. THE LAST COMMUNICATION WITH THE DEALERSHIP INDICATES PORSCHE HAS PUT A HOL…
Read full complaint
A SAFETY RECALL NHTSA ID 21V-131 WAS ISSUED FOR OUR VEHICLE IN OCTOBER 2021 INVOLVING AIRBAG SENSORS FOR THE FRONT PASSENGER. SEVERAL ATTEMPTS TO HAVE THE DEALER ADDRESS THIS RECALL HAVE BEEN UNSUCCESSFUL AS THEY DO NOT HAVE THE PARTS TO REMEDY THE ISSUE. THE LAST COMMUNICATION WITH THE DEALERSHIP INDICATES PORSCHE HAS PUT A HOLD ON THE REMEDY. WE ARE OBVIOUSLY CONCERNED ABOUT THE SAFETY OF THOSE RIDING IN THE FRONT PASSENGER SEAT.
A recall was issued for my vehicle in April of 2021. I have contacted my dealer several times to have this repaired, but have been told that the parts are not available. Last time I inquired, i was told to contact Porsche of North America directly regarding the availability of parts. I attempted to do so, but was told that I nee…
Read full complaint
A recall was issued for my vehicle in April of 2021. I have contacted my dealer several times to have this repaired, but have been told that the parts are not available. Last time I inquired, i was told to contact Porsche of North America directly regarding the availability of parts. I attempted to do so, but was told that I need to contact the dealer. As the recall relates to possible non-deployment of the passenger airbag, i feel that this issue needs to be addressed more expediently.
Takata recall. The contact owns a 2016 Porsche Macan. The contact received notification of NHTSA Campaign Number: 21V131000 (Air Bags) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had excee…
Read full complaint
Takata recall. The contact owns a 2016 Porsche Macan. The contact received notification of NHTSA Campaign Number: 21V131000 (Air Bags) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
TL* THE CONTACT OWNS A 2016 PORSCHE MACAN. THE CONTACT STATED THAT WHILE OPERATING THE VEHICLE, THE PASSENGER'S SIDE AIR BAG WARNING LIGHT REMAINED ILLUMINATED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHO DIAGNOSED THAT THE AIR BAG SENSOR WAS FAULTY. THE VEHICLE WAS NOT REPAIRED. THE LOCAL DEALER AND MANUFACTURER WERE N…
Read full complaint
TL* THE CONTACT OWNS A 2016 PORSCHE MACAN. THE CONTACT STATED THAT WHILE OPERATING THE VEHICLE, THE PASSENGER'S SIDE AIR BAG WARNING LIGHT REMAINED ILLUMINATED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHO DIAGNOSED THAT THE AIR BAG SENSOR WAS FAULTY. THE VEHICLE WAS NOT REPAIRED. THE LOCAL DEALER AND MANUFACTURER WERE NOT NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 49,000.
I WAS INFORMED AT MY LAST SERVICE THAT I NEED TO HAVE MY PASSENGER AIRBAG SEAT SENSOR REPLACED AND ALSO MY TIMING CHAIN COVER IS LEAKING OIL. I NOTICED ON NHTSA WEBSITE THAT BOTH OF THESE ISSUES ARE DOCUMENTED. THERE WAS A SAFETY RECALL FOR SIMILAR 2016 MACAN'S BUT MY VIN ISN'T LISTED. PART 573 SAFETY RECALL REPORT 17V-133. THER…
Read full complaint
I WAS INFORMED AT MY LAST SERVICE THAT I NEED TO HAVE MY PASSENGER AIRBAG SEAT SENSOR REPLACED AND ALSO MY TIMING CHAIN COVER IS LEAKING OIL. I NOTICED ON NHTSA WEBSITE THAT BOTH OF THESE ISSUES ARE DOCUMENTED. THERE WAS A SAFETY RECALL FOR SIMILAR 2016 MACAN'S BUT MY VIN ISN'T LISTED. PART 573 SAFETY RECALL REPORT 17V-133. THERE IS ALSO A MANUFACTURER COMMUNICATION (#D2000.1)RELATING TO THE OIL LEAK. NHTSA ID # 10182254. THESE ARE VERY EXPENSIVE REPAIRS AND UNCLEAR WHY THEY SHOULDN'T BE COVERED BY PORSCHE WHEN THEY ARE DOCUMENTED PROBLEMS.
HEADLIGHT LENSES ARE GETTING THOUSANDS OF SPIDER TYPE CRACKS ALL OVER THE LENSES, DIMINISHING HEADLAMP LIGHT OUTPUT. CAR IS ONLY 4 YEARS OLD WITH 39,750 MILES. MANY OWNERS HAVING SAME ISSUE. PICTURES DO NOT SHOW THAT THE LENSE BECOMES 'WHITISH' DUE TO FAILURE.
THE PASSENGER OCCUPANT DETECTION SENSOR MAT HAS FAILED AT 48K MILES. TAKEN TO DEALER THEY SAID IT NEEDED TO BE REPLACED. THIS PART HAS BEEN RECALLED ON OTHER MACANS OF THIS YEAR, BUT THIS VIN IS NOT LISTED IN THE RECALL. RECALL # 17V133.
THE EMERGENCY INDICATOR CAME ON WHILE I WAS OPERATING MY CAR. IT SAYS THE CAR IS TOO HOT. PULL OVER TO COOL DOWN' WHILE DRIVING IN A HIGHWAY. NO PRIOR INDICATION BEFORE THIS WARNING. WHITE SMOKE WAS COMING OUT OF THE HOOD WHEN I PULLED OVER OFF THE HIGHWAY. THEN, INDICATOR SAYS 'LOW COOLANT. FILL COOLANT.'
Official recalls
120V077000 · Fuel System, Gasoline:delivery:fuel Pump
Feb 12, 2020
Porsche Cars North America, Inc. (Porsche) is recalling certain 2015-2018 Macan vehicles. The fuel pump service cover may contact the flow nozzle on the filter flange of the fuel pump, potentially causing cracks and a fuel leak.
Consequence & remedy
Consequence: Fuel leakage in the presence of an ignition source may increase the risk of a fire.
Remedy: Porsche will rework or replace and apply a protective film to the fuel pump flange. in addition, the fuel pump flange will be inspected and replaced if cracks are present. The recall began April 10, 2020. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is ALA2.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.