IllustrationBOTH HEADLIGHT LENS ASSEMBLIES HAVE SMALL, YET VISIBLE CRACKS IN THE INTERIOR LENS SURFACE. THE LIGHTS ARE AS-BUILT AND THE VEHICLE HAS NEVER BEEN IN A COLLISION. THE CRACKS WERE DISCOVERED AS THE LIGHTS CAME IN WHEN I UNLOCKED MY CAR IN THE EVENING.
2015 Porsche Macan
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Macan years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 9 of 25 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 7 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Power Train. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports0 fire reports0 injury reports
What owners actually said
25 reportsTRANSFER CASE MAKING VEHICLE SLUGGISH IN FIRST AND SECOND GEARS. FEELS LIKE THE VEHICLE IS GOING TO STALL. I SPOKE WITH PORSCHE OF DELAWARE AND THEY ARE AWARE OF THE ISSUE WITH THE TRANSFER CASE.
ABRUPT BRAKE FLUID LEAK. LOST PRESSURE IN SYSTEM AND LEAKAGE AT FRONT PASSENGER SIDE WHEEL.
TL* THE CONTACT OWNS A 2015 PORSCHE MACAN. THE CONTACT STATED THAT NHTSA CAMPAIGN NUMBERS: 17V289000 (FUEL SYSTEM) AND 17V133000 (AIR BAGS) EXCEEDED A REASONABLE AMOUNT OF TIME FOR REPAIR. THE CONTACT RECEIVED THE RECALL NOTIFICATIONS IN MAY OF 2017. THE DEALER (PORSCHE OF HAWAII, 730 ALA MOANA BLVD, HONOLULU, HI, 96813) WAS CON…
Read full complaint
TL* THE CONTACT OWNS A 2015 PORSCHE MACAN. THE CONTACT STATED THAT NHTSA CAMPAIGN NUMBERS: 17V289000 (FUEL SYSTEM) AND 17V133000 (AIR BAGS) EXCEEDED A REASONABLE AMOUNT OF TIME FOR REPAIR. THE CONTACT RECEIVED THE RECALL NOTIFICATIONS IN MAY OF 2017. THE DEALER (PORSCHE OF HAWAII, 730 ALA MOANA BLVD, HONOLULU, HI, 96813) WAS CONTACTED TWICE. THE FIRST TIME, THE DEALER STATED THAT PARTS WERE UNAVAILABLE AND WOULD NOTIFY THE CONTACT ONCE THEY BECAME AVAILABLE. THE SECOND TIME, THE CONTACT CALLED TO SCHEDULE AN APPOINTMENT BECAUSE PARTS WERE AVAILABLE; HOWEVER, THE DEALER STATED THAT THERE WERE NO MORE APPOINTMENTS AVAILABLE AND THAT THE PORSCHE COMPANY ONLY CAME ONCE A QUARTER TO THE ISLAND. THE DEALER FURTHER STATED THAT IF THEY WERE UNABLE TO GET THE VEHICLE IN THIS TIME, PERHAPS THEY COULD BEFORE THE END OF THE YEAR. THE MANUFACTURER WAS CONTACTED A FEW TIMES AND MADE AWARE OF THE FAILURE. THE MANUFACTURER STATED THAT THEY WOULD GIVE THE CONTACT A RETURN CALL AND WERE TRYING TO REACH OUT TO THE DEALER. THE CONTACT HAD NOT RECEIVED A RETURN CALL FROM THE PORSCHE MANUFACTURER. THE CONTACT HAD NOT EXPERIENCED A FAILURE.
TL* THE CONTACT OWNS A 2015 PORSCHE MACAN. THE CONTACT STATED THAT THE BEIGE COLOR ON THE DASHBOARD CREATED A GLARE ON THE WINDSHIELD DUE TO THE SUN. ADDITIONALLY, THE CONTACT'S VISION WOULD BECOME IMPAIRED DUE TO THE FAILURE. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMAT…
Read full complaint
TL* THE CONTACT OWNS A 2015 PORSCHE MACAN. THE CONTACT STATED THAT THE BEIGE COLOR ON THE DASHBOARD CREATED A GLARE ON THE WINDSHIELD DUE TO THE SUN. ADDITIONALLY, THE CONTACT'S VISION WOULD BECOME IMPAIRED DUE TO THE FAILURE. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 20.
Official recalls
220V077000 · Fuel System, Gasoline:delivery:fuel Pump
Feb 12, 2020
Porsche Cars North America, Inc. (Porsche) is recalling certain 2015-2018 Macan vehicles. The fuel pump service cover may contact the flow nozzle on the filter flange of the fuel pump, potentially causing cracks and a fuel leak.
Consequence & remedy
Consequence: Fuel leakage in the presence of an ignition source may increase the risk of a fire.
Remedy: Porsche will rework or replace and apply a protective film to the fuel pump flange. in addition, the fuel pump flange will be inspected and replaced if cracks are present. The recall began April 10, 2020. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is ALA2.
14V470000 · Service Brakes, Hydraulic:power Assist
Aug 1, 2014
Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2015 Macan vehicles manufactured March 6, 2014, to April 26, 2014. During manufacturing, the brake booster may have been damaged during installation.
Consequence & remedy
Consequence: If the brake booster was damaged during installation, the vacuum in the brake booster may drop when the brakes are actuated, resulting in a reduced brake force boost, increasing the risk of a crash.
Remedy: Porsche will notify owners, and dealers will inspect and replace the brake booster, as necessary, free of charge. The recall began on December 29, 2014. Owners may contact Porsche customer service at 1-800-545-8039. Porsche's number for this recall is AE02.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.