THE VEHICLE WAS BEING PERSONALLY INSPECTED WHILE STATIONARY. I HAVE NOTICED A SIGNIFICANT WEAR DIFFERENCE IN THE RIGHT FRONT BRAKE ROTOR WHILE IT IS BEING BEDDED. UPON CLOSER INSPECTION, I HAVE DETERMINED THAT THERE ARE 2 DIFFERENT FRONT ROTOR TYPES ON THIS VEHICLE. THE RIGHT ROTOR IS A SINGLE PIECE ROTOR WHILE THE LEFT ROTOR IS…
Read full complaint
THE VEHICLE WAS BEING PERSONALLY INSPECTED WHILE STATIONARY. I HAVE NOTICED A SIGNIFICANT WEAR DIFFERENCE IN THE RIGHT FRONT BRAKE ROTOR WHILE IT IS BEING BEDDED. UPON CLOSER INSPECTION, I HAVE DETERMINED THAT THERE ARE 2 DIFFERENT FRONT ROTOR TYPES ON THIS VEHICLE. THE RIGHT ROTOR IS A SINGLE PIECE ROTOR WHILE THE LEFT ROTOR IS THE DUAL-PIECE ROTOR THAT IS SUPPOSED TO BE ON THE SLR VERSION. ACCORDING TO THE MANUAL, THE SINGLE ROTOR MINIMUM THICKNESS IS FRONT 4.5MM, REAR 6.5MM WHILE THE DUAL-ROTOR MINIMUM THICKNESS IS FRONT 19MM, REAR 19M. THEY ARE SIGNIFICANTLY DIFFERENT SIZES WHICH WILL POSSIBLY CAUSE ADVERSE BRAKING ACTION AND POSSIBLE LOSS OF CONTROL OF THE VEHICLE.
Polaris Inc. (Polaris) is recalling certain 2015-2019 Slingshot motorcycles. Excessive electrical current may damage the battery fuse holder terminals.
Consequence & remedy
Consequence: Damaged terminals may result in the loss of forward and rear lighting, instrument cluster gauges, or power steering assist. Any of these scenarios increase the risk of a crash.
Remedy: Polaris will notify owners, and dealers will inspect the battery fuse block terminals and relocate the 50 amp chassis fuse, free of charge. The recall began October 24, 2019. Owners may contact Polaris customer service at 1-855-863-2284. Polaris's number for this recall is T-19-01.
Polaris Industries, Inc. (Polaris) is recalling certain 2018-2019 Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver's seat to move unexpectedly.
Consequence & remedy
Consequence: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver's seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.
Remedy: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn't latch properly, the seat bases will be replaced, free of charge. The recall began April 11, 2019. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-01. Note: this recall is an expansion of recall 18V-195.
Additional source detail variants (2)
Seats
Polaris Industries, Inc. (Polaris) is recalling certain 2018-2019 Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver's seat to move unexpectedly.
Consequence: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver's seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.
Remedy: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn't latch properly, the seat bases will be replaced, free of charge. The recall began April 11, 2019. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-01. Note: this recall is an expansion of recall 18V-195.
Seat Belts
Polaris Industries, Inc. (Polaris) is recalling certain 2018-2019 Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver's seat to move unexpectedly.
Consequence: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver's seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.
Remedy: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn't latch properly, the seat bases will be replaced, free of charge. The recall began April 11, 2019. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-01. Note: this recall is an expansion of recall 18V-195.
Polaris Industries, Inc. (Polaris) is recalling certain 2017-2019 Polaris Slingshot S, Slingshot SL, Slingshot GT LE, and Slingshot SLR motorcycles. In the event of a crash, the seatbelt retractor on the side opposite of the impact may separate, preventing the seatbelt from locking.
Consequence & remedy
Consequence: In the event of a crash, if the seat belt does not lock, the occupant may not be properly restrained, increasing their risk of injury.
Remedy: Polaris will notify owners, and dealers will install a kit that prevents the retractor from separating in the event of a crash, free of charge. The recall began August 28, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-03.
Polaris Industries, Inc. (Polaris) is recalling certain 2017-2018 Polaris Slingshot, Slingshot SL, Slingshot SLR, Slingshot SL Icon, and Slingshot GT LE motorcycles. The brake pedals may have been incorrectly installed, allowing the brake pedal to separate from the brake master cylinder.
Consequence & remedy
Consequence: If the brake pedal separates from the brake master cylinder, it would cause a loss of braking ability, increasing the risk of a crash.
Remedy: Polaris will notify owners, and dealers will inspect the engagement of the brake pedal retaining clip and reassemble it if necessary, free of charge. The recall began on June 5, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-02.
Polaris Industries, Inc. (Polaris) is recalling all 2015-2018 Polaris Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver's seat to move unexpectedly.
Consequence & remedy
Consequence: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver's seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.
Remedy: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn't latch properly, the seat bases will be replaced, free of charge. The recall began on April 16, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-01.
Additional source detail variants (2)
Seats
Polaris Industries, Inc. (Polaris) is recalling all 2015-2018 Polaris Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver's seat to move unexpectedly.
Consequence: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver's seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.
Remedy: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn't latch properly, the seat bases will be replaced, free of charge. The recall began on April 16, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-01.
Seat Belts
Polaris Industries, Inc. (Polaris) is recalling all 2015-2018 Polaris Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver's seat to move unexpectedly.
Consequence: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver's seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.
Remedy: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn't latch properly, the seat bases will be replaced, free of charge. The recall began on April 16, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-01.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Illustration