IllustrationSEAT BELT FAILED.
1989 Nissan Sentra
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 1989 Nissan Sentra do not stand out strongly from the model-year median of 116.
About this comparison →How this year compares
Owner complaints by model year
Compare all Sentra years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 41 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Seat Belts. Review the 22 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine And Engine Cooling. Review the 9 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
6 crash reports1 fire reports3 injury reports
What owners actually said
41 reportsSEAT BELT FAILED AFTER RECALL REPAIRS.
DURING REAR IMPACT AT SPEEDS OF 15 MPH, THE DRIVER AND PASSENGER'S SIDE SEAT FALL BACKWARDS ONTO THE REAR SEAT.
OWNER STATES THAT HE RECEIVED A RECALL NOTICE FOR THE RELEASE BUTTON ON HIS SEAT BELTS , DEALER REPAIRED THE PROBLEM BUT THE DAY AFTER HE WAS INVOLVED IN AN ACCIDENT, HE NOTES THAT SHOULDER STRAPS DID NOT HOLD IN PLACE AND DRIVER HIT STEERING WHEEL. *AK
SEAT BELT LATCH BROKE PRIOR TO RECALL.
THE FREEZE PLUG CORRODED AND THE WATER RAN OUT OF THE ENGINE AND CAUSED THE VEHICLE TO STOP WHILE DRIVNG ON THE HIGHWAY. THERE WAS NO WARNING OF THIS. *AK IGNITION WIRES AND PARTS WERE ALL MELTED AND HAD TO BE REPLACED FREEZE PLU HAD TO BE REPLACED.*JB
SEAT BELT FAILED RELEASE BUTTON FAILED.
PLASTIC CHAIN ON TIMING BELT BROKE WHILE DRIVING, RENDERING THE VEHICLE INOPERATIVE.*AK
ENGINE HEAD MELTED DUE TO DEFECTIVE FAN SENSOR. *SD
WHILE DRIVING THE TIMING CHAIN BROKE AND CAUSED THE CAR TO STALL IMMEDIATELY IN ITS TRACKS. PLEASE DESCRIBE. *AK
Official recalls
195V103002 · Seat Belts:front:buckle Assembly
May 24, 1995
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
Consequence & remedy
Consequence: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED FREE OF CHARGE.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA95007 · Takata Seat Belt Buckle Failure
Opened Mar 10, 1995 · Closed Aug 2, 1995
Status: closed (inferred from source dates) · Seat Belts:front:buckle Assembly
There is no summary currently available