Nissan Altima electrical problems

Door lock actuators have failed completely on 2 doors, and intermittently on 1 door of a 2021 Nissan Altima. They do not respond to either the key fob or door button. There are no warnings or indicators associated with this component so it is unknown when the failures first occurred, but it was first noticed in summer of 2025. The components have not been inspected but could be made available for inspection if requested. Not being able to unlock doors could present an entrapment hazard in the event of a collision. The doors remaining unlocked is a safety concern as there is nothing preventing the door from potentially being opened while driving, and a security concern as the vehicle may inadvertently be left unlocked even if the lock buttons are pressed on the key fob and/or door. Numerous official and anecdotal consumer reports exist but at the time of this submittal the manufacturer has not issued any notices or recalls regarding this problem.

I purchased this car in April 2023 and in December 2023. I had to get a new battery when I purchased a car. They told me that there was no worries or mishaps with the vehicle they said just only normal wear and tear for is a used vehicle. My car is a 2021 Nissan Altima so the car would’ve been about two years old maybe or on his way to be in two years old when I got the car according to the Carfax and the information provided to me it only had one owner previously. I’m not sure what the person did with the car but the battery was bad fast-forward to 2025. I was hit by a F150 truck. I got T-bone I had to go to the hospital, etc. it was a pretty bad hit. My windows were cracked or excuse me broken and my airbags were not deployed. No airbag was deployed. I did have my seatbelt on when the police came. My CB was still on so my car had to go. It was towed, and then it went to a mechanic shop to be fixed by the other person‘s insurance at that time, the mechanic sent me photos and explain that there was faulty, wiring and seatbelts, and he was unsure why it would be there. He said it was a immediate safety hazard, and I should address it with North Coast as soon as possible North Coast auto Mall is where I purchased the car from when I reached out to them all they told me was all you’ve had the car for about three years now we don’t know what you may have done to the Car. I still have the photos of the faulty wiring. I’m no mechanic. I explained to them that was an accident and the airbags did not deploy and when the mechanic also confirmed that’s probably why I have not heard anything from North Coast. This is an extreme safety hazard.

Odometer Fraud. The contact purchased a 2020 Nissan Altima. The contact became aware that there was a mileage discrepancy after the purchase. The vehicle was an independent dealer sale. At the time of the purchase, the vehicle mileage was 83,000. It was later discovered during routine maintenance with an authorized local dealer that the mileage was 125,000.

What component or system failed or malfunctioned, and is it available for inspection upon request? The Engine Control Module (ECM) is malfunctioning, triggering persistent P0101 codes related to the Mass Air Flow (MAF) sensor. This specific issue is addressed in Nissan Technical Service Bulletin DE97AA, which recommends an ECM reprogramming. The component is still installed in the vehicle and is available for inspection. ⸻ • How was your safety or the safety of others put at risk? When the vehicle is at a complete stop and I attempt to accelerate, it becomes jumpy and unresponsive, refusing to accelerate properly. This creates a serious safety hazard, especially when trying to merge into traffic or cross intersections, as I am unable to match the speed of other vehicles. This increases the risk of being rear-ended or causing an accident due to unexpectedly slow acceleration. ⸻ • Has the problem been reproduced or confirmed by a dealer or independent service center? Yes. An independent mechanic diagnosed the issue and confirmed the code P0101. After reviewing Nissan’s official TSB DE97AA, they advised me to go to a Nissan dealership to have the ECM reprogrammed as outlined in the bulletin. ⸻ • Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? The vehicle was inspected by an independent mechanic, but not yet by the manufacturer. The dealership is aware of the issue but has refused to perform the repair without payment. ⸻ • Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? Yes. The Check Engine Light is consistently triggered by code P0101, and the traction control warning light also comes on when the issue is active. The symptoms appeared recently and continue to recur even after the code is reset by standard non-dealership methods like unplugging the battery.

All four of my door lock actuators have went out without warning. This has caused stress and frustration due to not having the correct access to get in and out of my vehicle. The doors would not lock or unlock by pressing the buttons on the door or on the key itself. This has also caused a big safety concern. Being able to not open my car door is dangerous and could potentially hurt myself or others. I have contacted Nissan and they stated that there were not any recalls on my vehicle but I was suspicious since all lock actuators went out around the same time frame. I have paid to get 3/4 lock actuators replaced out of my own pocket with 1 lock actuator still not fixed. I was not made aware of the lock actuators failing and didn’t know that this was a problem a lot of other people were experiencing as well.

I bought my 2019 Nissan Altima SR from Westshore Mazda in Tampa. The next day I locked and unlocked the car and noticed that only the driver‘s door was working so three out of the four doors don’t lock and unlock by either the driver side door or the key fobs. I looked this up online and noticed it’s a defect on a lot of these models and the sentras.