Service brakes, hydraulic foundation components: disc: caliper The bolts on all 4 of my tires are constantly going loose and I have problems with my front brakes never lasting as long as they should and always burn out very fast.
2015 Nissan Altima
Owner reports · Recalls · Investigations
More warning signs than most Altima years
Owner complaints for the 2015 Nissan Altima are substantially higher than the model-year median of 231.
About this comparison →How this year compares
Owner complaints by model year
Compare all Altima years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
544 reports with mileage · 408 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Exterior Lighting. Review the 269 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Air Bags. Review the 177 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Power Train. Review the 161 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
Service Brakes complaints
26 reportsOur Nissan Altima has been experiencing the brake lamp relay switch issue, where the brake light will be on when brakes are not pushed and causes issue with acceleration. There is an existing recall open on this exact issue for the 2013-2015 models, however when I called a Nissan Service Center was advised our VIN is not part of…
Read full complaint
Our Nissan Altima has been experiencing the brake lamp relay switch issue, where the brake light will be on when brakes are not pushed and causes issue with acceleration. There is an existing recall open on this exact issue for the 2013-2015 models, however when I called a Nissan Service Center was advised our VIN is not part of the recall and would not be covered. Obviously the manufacturing date for our vehicle and others likewise should be included as it is the same exact issue. This puts a huge risk that this faulty product will cause an accident when you are unable to get up to speed because of the faulty parts.
This is my 3rd Altima. The first 2 were amazing. This 1 is not. I bought it used from Shift.com with 73k miles on it. About 6-8 months later I started feeling something wrong in the steering. The shop I took it too said the lower control arms were in the rear were corroded and the bushing were going bad. Tried to get it repaired…
Read full complaint
This is my 3rd Altima. The first 2 were amazing. This 1 is not. I bought it used from Shift.com with 73k miles on it. About 6-8 months later I started feeling something wrong in the steering. The shop I took it too said the lower control arms were in the rear were corroded and the bushing were going bad. Tried to get it repaired thru the extended warranty I paid extra for but that was a nightmare and we ended fixing it ourselves. Something was still wrong. I put new tires on it, still wrong. Changed out the struts on front and shocks on rear, new control arms,, bushings, sway bar links, and tie rods. New brake pads and rotors. Then I bought custom wheels and another set of new tires for it. Took it and had an alignment done. The shop said everything looked good. Not long after it started drifting all over the road and I started hearing a whining noise. The next shop said the electric hydraulic power steering pump was going bad. Again the warranty company only allows the shop to call in and handle any repair claims and then they make them sit on hold forever. This is my only transportation and I can't wait for it to break in order for the warranty to repair it. In the meantime trying to figure out what to do the car is getting harder to drive straight down the road. I turned left thru an intersection and ran over the center median blowing out a tire. In 2 other occasions I hit my new wheels on the curb because the steering wheel has excessive play in it. We ended up changing the power steering unit without help from the warranty. After some research I had the lower steering shaft replaced also. The entire suspension has been replaced(front struts 2x) and it only has 115k miles on it. It's had 3 alignments in 2 years and yesterday the man at Les Schwab said the rack and pinion has some play in it. As well as the upper steering shaft needing to be replaced also. Oh and the CVT transmission is now leaking.
My car only has 36,400 miles. I went for an oil change at a third party garage and was told my front control arms are cracked and need to be replaced. I went to the dealer who confirmed this and also said there was a recall on the rear control arms. I have talked to numerous mechanics who said that the control arm should not be …
Read full complaint
My car only has 36,400 miles. I went for an oil change at a third party garage and was told my front control arms are cracked and need to be replaced. I went to the dealer who confirmed this and also said there was a recall on the rear control arms. I have talked to numerous mechanics who said that the control arm should not be failing at 36,400 miles. I contacted Nissan asking them to help me with the cost of the front control arms since they are failing at such low mileage. They are not willing to do anything. I feel like the front should be replaced by the dealer.
I bought my car brand new in 2015 from a Nissan dealership. Few months after that the breaks started making noise. I took my car to the dealership thinking that I needed new breaks and learned that the breakes were fine and the issue was debris accumulations inside the breaks. Since then I had the same issue a number of times, r…
Read full complaint
I bought my car brand new in 2015 from a Nissan dealership. Few months after that the breaks started making noise. I took my car to the dealership thinking that I needed new breaks and learned that the breakes were fine and the issue was debris accumulations inside the breaks. Since then I had the same issue a number of times, roughly every 3-5 months depending mileage. Through the years I learned that this was a rather known issue with Nissan Altima 2015. The issue requires opening the breaks, cleaning, and then putting them back. Because this was a known issue, the dealerships fixed my car for free in the past. But last time, I took it to another dealership near my current location and they charged me almost $300 for cleaning the breaks. I'm reporting to see if it would be possible to investigate and find solutions for this recurring issue. I have several recipes dating back to 2015, not sure if they indicate details on the cleaning though.
I HAVE BEEN IN 2 ACCIDENTS AND AIR BAG HAVE NEVER EXPLODED. THE AIR BAG DOES NOT WORK AND I HAVE BEEN TO NISSAN SEVERAL TIMES.
JULY 2018: BRAKE LIGHT SWITCH HAD INTERMITTENT FAILURES - ONCE THE BRAKE PEDAL WAS ENGAGED, IT WOULD NOT DISENGAGE. THE PROBLEM WAS INTERMITTENT OVER A MONTH-LONG PERIOD. ONCE THE PROBLEM OCCURRED, THE CAR WOULD ONLY USE NEUTRAL GEAR. (DETAILED DESCRIPTION ATTACHED) HAPPENED ON THE HIGHWAY AT 50+ MPH AS WELL AS FROM STOP SIGNS, …
Read full complaint
JULY 2018: BRAKE LIGHT SWITCH HAD INTERMITTENT FAILURES - ONCE THE BRAKE PEDAL WAS ENGAGED, IT WOULD NOT DISENGAGE. THE PROBLEM WAS INTERMITTENT OVER A MONTH-LONG PERIOD. ONCE THE PROBLEM OCCURRED, THE CAR WOULD ONLY USE NEUTRAL GEAR. (DETAILED DESCRIPTION ATTACHED) HAPPENED ON THE HIGHWAY AT 50+ MPH AS WELL AS FROM STOP SIGNS, STOP & GO TRAFFIC. JULY 2019: BRAKE LIGHT SWITCH HAD INTERMITTENT FAILURES - THE CAR WOULD NOT START EVEN THOUGH THE BRAKE PEDAL WAS ENGAGED; THE CAR'S ELECTRONICS DID NOT RECOGNIZE THAT THE BRAKE PEDAL WAS ENGAGED.
BREAK FAILURE BY SUDDEN - ON 05/09/19 WHEN I TRY TO PARK MY CAR, I STEPPED ON BREAK AND SLOWLY MOVE INTO PARKING SPOT; THE BREAK WAS SUDDENLY DROP INTO VACUUM WITHOUT RESISTANCE. MY BRAIN REACTION BY TRYING TO STOP A CAR, BUT SINCE THE BREAK SUDDENLY FAILURE, I CHANGED FROM BREAK PEDAL TO GAS AND CAUSE THE CAR TO MOVE FORWARD, …
Read full complaint
BREAK FAILURE BY SUDDEN - ON 05/09/19 WHEN I TRY TO PARK MY CAR, I STEPPED ON BREAK AND SLOWLY MOVE INTO PARKING SPOT; THE BREAK WAS SUDDENLY DROP INTO VACUUM WITHOUT RESISTANCE. MY BRAIN REACTION BY TRYING TO STOP A CAR, BUT SINCE THE BREAK SUDDENLY FAILURE, I CHANGED FROM BREAK PEDAL TO GAS AND CAUSE THE CAR TO MOVE FORWARD, WHICH HAD CAUSED AN ACCIDENT.
NISSAN ALTIMA 2015 REQUIRES THE PRESS OF THE START BUTTON AND BRAKE TO START ENGINE. THE ENGINE WILL NOT START DUE TO STIFF BRAKE. THE VEHICLE WAS STATIONARY AT THE MOMENT THIS ISSUE WAS DISCOVERED.
STARTED THE CRUISE CONTROL WHEN TRYING TO APPLY THE BRAKES THE BRAKES DIDN'T WORK. PUMP BRAKES CONTINUOUSLY AND THE CAR WOULDN'T STOP.OAT CONTROL OF THE CAR AND PLUNGED INTO A DITCH.
Official recalls
1020V315000 · Latches/locks/linkages:hood:latch
May 28, 2020
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2018 Nissan Altima vehicles. If the primary hood latch is inadvertently released, there is an increased likelihood that the secondary hood latch may corrode over time.
Consequence & remedy
Consequence: Corrosion to the secondary latch may cause it to bind and remain in the unlatched position when the hood is closed. If the primary latch is inadvertently released again and the secondary latch is not engaged, the hood could unexpectedly open while driving, increasing the risk of a vehicle crash.
Remedy: Nissan will notify owners, and dealers will install a stronger release spring in the hood release lever, a warning label near the secondary hood latch, and an Owners Manual addendum card with instructions on how to lubricate and maintain the secondary hood latch mechanism, free of charge. Owner notification letters were mailed June 30, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Note: Recall 16V-029 remains open for any unremedied 2013-2015 Altimas and this recall applies to all vehicles covered by 16V-029 even if those repairs have already been performed.
18V915000 · Latches/locks/linkages:doors:latch; Structure:emergency:escape/egress/exit
Dec 19, 2018
Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 Altima vehicles, previously remedied under recall number 17V-040. The door latch-lock cable may not have been routed properly in the rear door when the remedy was applied. As a result, the cable may interfere with the window regulator causing the rear passenger door to unlatch and inadvertently open without warning when the window is lowered.
Consequence & remedy
Consequence: If the rear passenger door opens while the vehicle is moving, the rear passengers have an increased risk of injury.
Remedy: Nissan will notify owners, and dealers will secure the latch-lock cables in the correct position using the new remedy procedure, free of charge. The recall began February 5, 2019. Owners may contact Nissan customer service at 1-800-647-7669.
Additional source detail variants (2)
Structure:emergency:escape/egress/exit
Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 Altima vehicles, previously remedied under recall number 17V-040. The door latch-lock cable may not have been routed properly in the rear door when the remedy was applied. As a result, the cable may interfere with the window regulator causing the rear passenger door to unlatch and inadvertently open without warning when the window is lowered.
Consequence: If the rear passenger door opens while the vehicle is moving, the rear passengers have an increased risk of injury.
Remedy: Nissan will notify owners, and dealers will secure the latch-lock cables in the correct position using the new remedy procedure, free of charge. The recall began February 5, 2019. Owners may contact Nissan customer service at 1-800-647-7669.
Latches/locks/linkages:doors:latch
Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 Altima vehicles, previously remedied under recall number 17V-040. The door latch-lock cable may not have been routed properly in the rear door when the remedy was applied. As a result, the cable may interfere with the window regulator causing the rear passenger door to unlatch and inadvertently open without warning when the window is lowered.
Consequence: If the rear passenger door opens while the vehicle is moving, the rear passengers have an increased risk of injury.
Remedy: Nissan will notify owners, and dealers will secure the latch-lock cables in the correct position using the new remedy procedure, free of charge. The recall began February 5, 2019. Owners may contact Nissan customer service at 1-800-647-7669.
17V040000 · Latches/locks/linkages:doors:latch
Jan 18, 2017
Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 Altima vehicles. The rear door latch/lock cable on the vehicles may have been improperly routed. As a result, lowering a rear window may inadvertently cause that door to unlatch and open.
Consequence & remedy
Consequence: If the rear passenger doors inadvertently open while the vehicle is in motion, it may increase the risk of injury to the rear passengers.
Remedy: Nissan will notify owners, and dealers will correct the rear door latch/lock cable routing, free of charge. The recall began on February 16, 2017. Owners may contact Nissan customer service at 1-800-647-7261.
16V911000 · Air Bags:sensor:occupant Classification
Dec 19, 2016
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2015 Altima vehicles manufactured January 3, 2013, to July 29, 2013, 2015-2016 Rogue vehicles manufactured October 14, 2014, to August 12, 2016, and 2016 Maxima vehicles manufactured June 4, 2015, to August 19, 2015. An incorrect Occupant Classification System (OCS) Electronic Control Unit (ECU) may have been installed in the front passenger seat. The incorrect ECU and seat combination may misclassify the front passenger seat occupant.
Consequence & remedy
Consequence: If the front passenger seat occupant is misclassified, the air bag may deploy incorrectly in the event of a crash, increasing the risk of injury.
Remedy: Nissan will notify owners, and dealers will replace the ECU and update the OCS software free of charge. The recall began February 13, 2017. Owners may contact Nissan customer service at 1-800-647-7261.
16V244000 · Air Bags:sensor:occupant Classification
Apr 26, 2016
Nissan North America, Inc. (Nissan) is recalling certain model year 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, LEAF, Sentra, and Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60, QX60 Hybrid, and Q50 Hybrid, 2014-2017 Nissan Rogue and Infiniti Q50, 2015-2016 Nissan Murano, Murano Hybrid, and Chevrolet City Express, 2014-2015 Nissan Pathfinder Hybrid, and 2013 Infiniti JX35 vehicles. In these vehicles, the front seat passenger Occupant Classification System (OCS) may incorrectly classify an adult passenger as a child or classify the seat as empty despite it being occupied. As a result, the passenger frontal air bag may be turned off and not deploy in the event of a crash.
Consequence & remedy
Consequence: If the passenger frontal air bag does not deploy as intended in the event of a crash, the passenger is at an increased risk of injury.
Remedy: Nissan will notify their owners. Chevrolet City Express owners will be notified by General Motors. Dealers will reprogram the Air Bag Control Unit (ACU) and OCS Electronic Control Unit (ECU) in Altima, Maxima, Murano, Rogue, and Sentra vehicles, and replace the OCS ECU in LEAF, NV200, NV200 Taxi, Pathfinder, Infiniti Q50, JX35, and QX60 and Chevrolet City Express vehicles, free of charge. Interim notices were sent to owners on May 31, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Nissan customer service at 1-800-867-7669, Infiniti customer service at 1-888-833-3216 or Chevrolet customer service at 1-800-222-1020.
16V029000 · Latches/locks/linkages:hood:latch
Jan 22, 2016
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2015 Nissan Altima vehicles manufactured March 6, 2012, to December 31, 2014. In the affected vehicles, the secondary hood latch may bind and remain in the unlatched position when the hood is closed.
Consequence & remedy
Consequence: If the primary latch is inadvertently released and the secondary latch is not engaged, the hood could unexpectedly open while driving, increasing the risk of a vehicle crash.
Remedy: These vehicles were previously included in recalls 14V-565 and 15V-116, however the previous remedy plan may not have been performed consistently to remove the safety risk. To correct this issue, Nissan will re-notify all affected owners and dealers will replace the hood latch with a new one, free of charge. The recall began on February 17, 2016. Owners may contact Nissan customer service at 1-800-647-7261. Note: This recall supersedes recalls 14V-565 and 15V-116.
15V733000 · Service Brakes, Hydraulic:foundation Components:disc:caliper
Nov 5, 2015
Nissan North America, Inc. (Nissan) is recalling certain model year 2015 Altima and 2016 Maxima vehicles manufactured October 6, 2015, to October 7, 2015. The affected vehicles have front brake calipers whose mounting bolts may not be properly tightened.
Consequence & remedy
Consequence: If the bolts were not properly tightened, the caliper may detach and reduce braking ability, increasing the risk of a crash.
Remedy: Nissan will notify owners, and dealers will check the brake caliper mounting bolts, tightening them as necessary, free of charge. The recall began on December 14, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
15V681000 · Air Bags:frontal; Air Bags:sensor:occupant Classification
Oct 20, 2015
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2015 Altima and Pathfinder vehicles, 2013-2014 Nissan Sentra vehicles, 2013 Infiniti JX35 vehicles, 2014-2015 Infiniti QX60 vehicles and 2014 Infiniti QX60 Hybrid vehicles. The affected vehicles received an incorrect occupant classification system (OCS) control unit during a repair. These OCS control units may incorrectly classify the front passenger seat as empty, when it is occupied by an adult.
Consequence & remedy
Consequence: If the OCS does not detect an adult occupant in the passenger seat, the passenger air bag would be deactivated. Failure of the passenger airbag to deploy during a crash (where deployment is warranted) could increase the risk of injury to the passenger.
Remedy: Nissan will notify owners, and dealers will update the OCS software, free of charge. The recall began on November 30, 2015. Owners may contact Nissan at 1-800-647-7261.
Additional source detail variants (2)
Air Bags:sensor:occupant Classification
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2015 Altima and Pathfinder vehicles, 2013-2014 Nissan Sentra vehicles, 2013 Infiniti JX35 vehicles, 2014-2015 Infiniti QX60 vehicles and 2014 Infiniti QX60 Hybrid vehicles. The affected vehicles received an incorrect occupant classification system (OCS) control unit during a repair. These OCS control units may incorrectly classify the front passenger seat as empty, when it is occupied by an adult.
Consequence: If the OCS does not detect an adult occupant in the passenger seat, the passenger air bag would be deactivated. Failure of the passenger airbag to deploy during a crash (where deployment is warranted) could increase the risk of injury to the passenger.
Remedy: Nissan will notify owners, and dealers will update the OCS software, free of charge. The recall began on November 30, 2015. Owners may contact Nissan at 1-800-647-7261.
Air Bags:frontal
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2015 Altima and Pathfinder vehicles, 2013-2014 Nissan Sentra vehicles, 2013 Infiniti JX35 vehicles, 2014-2015 Infiniti QX60 vehicles and 2014 Infiniti QX60 Hybrid vehicles. The affected vehicles received an incorrect occupant classification system (OCS) control unit during a repair. These OCS control units may incorrectly classify the front passenger seat as empty, when it is occupied by an adult.
Consequence: If the OCS does not detect an adult occupant in the passenger seat, the passenger air bag would be deactivated. Failure of the passenger airbag to deploy during a crash (where deployment is warranted) could increase the risk of injury to the passenger.
Remedy: Nissan will notify owners, and dealers will update the OCS software, free of charge. The recall began on November 30, 2015. Owners may contact Nissan at 1-800-647-7261.
15V486000 · Fuel System, Gasoline
Aug 4, 2015
Nissan North America, Inc. (Nissan) notified the agency on July 31, 2015, that they are recalling certain model year 2016 Nissan Maxima vehicles manufactured February 10, 2015, to August 18, 2015. On October 14, 2015, Nissan expanded the recall to cover an additional 41,388 vehicles, including certain model year 2013-2015 Altima 3.5 vehicles equipped with a V6 engine manufactured March 30, 2012, to August 18, 2015 as well as the vehicles covered by the July 31, 2015 notification. In the affected vehicles, due to an improperly installed o-ring that may not have been seated correctly at the time of assembly, fuel may leak during a crash from the area where the fuel sending unit attaches to the fuel tank.
Consequence & remedy
Consequence: If fuel leaks from between the fuel sending unit and the tank, it may increase the risk of a fire in the event of a crash.
Remedy: Nissan will notify owners, and dealers will install a retainer ring between the fuel tank and the fuel sending unit. The recall began on September 28, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
15V116000 · Latches/locks/linkages:hood:latch
Feb 27, 2015
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2015 Nissan Altima vehicles manufactured March 1, 2013, to December 31, 2014. In the affected vehicles, the secondary hood latch may bind and remain in the unlatched position when the hood is closed.
Consequence & remedy
Consequence: If the primary latch is inadvertently released and the secondary latch is not engaged, the hood could unexpectedly open while driving, increasing the risk of a vehicle crash.
Remedy: Nissan will notify owners, and dealers will be instructed to modify the bend angle of the hood actuation lever to eliminate potential interference with the hood inner panel. In addition, dealers will clean and lubricate the latch joint as needed. If significant corrosion is observed, the latch assembly will be replaced. This repairs will be performed free of charge. The recall began March 31, 2015. Owners may contact Nissan customer service at 1-800-647-7261. Note: This recall is an expansion of recall 14V-565.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
3EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA19002 · Rear Suspension Control Arm Failure
Opened Jul 29, 2019 · Closed Jun 16, 2025
Status: closed (inferred from source dates) · Suspension:rear
On July 29, 2019, the Office of Defects Investigation (ODI) opened EA19002 to investigate instances of alleged rear lower control arm failures in 2013-2018 Nissan Altima and 2016-2018 Nissan Maxima vehicles. At the time the investigation was opened ODI had 91 consumer complaints alleging rear lower control arm failures in the subject vehicles.ODI was concerned about these complaints because many of them alleged an increased steering effort or loss of vehicle control.At the time these complaints were received, ODI was also aware of a proactive service campaign addressing 2013 Nissan Altima in salt-belt states for a similar concern. Since opening the investigation, ODI has confirmed, based on consumer complaints, warranty data, and testing conducted by Nissan and ODI, that owners of the subject vehicles are experiencing a corroded bushing at one of three mounting points of the control arm to the rear subframe.ODI has also confirmed that drivers become aware of the problem because of sound and abnormal vibrations. In addition, the failure mileage is typically over 113,000 miles at the time of failure.In conjunction with Nissan and VRTC, ODI participated in testing to assess the potential safety consequence of a bushing failure.It was found the Vehicle Dynamic Control system allows the driver to maintain vehicle control in the event of a bushing failure.With between 7 to 13 years of field exposure, ODI is aware of only one low speed crash allegation describing minor contact with another vehicle’s trailer hitch. Nissan acknowledges that a crack can develop in affected control arms due to stress loading from normal use and that salts commonly used for roadway snow and ice treatment may result in corrosion that exacerbates the progression of the crack.Nissan implemented a design change in January of 2018 to improve the durability of the lower control arm.Affected vehicles have either been repaired with the countermeasure part under a customer satisfaction campaign or been provided a warranty extension from 3 years/36,000 miles to 10 year/unlimited mileage. Through testing and analysis of the information obtained to date, ODI has not identified a defect representing an unreasonable risk to motor vehicle safety involving corrosion of the subject rear lower control arm at this time.With a declining trend of reports and Nissan’s actions to implement a countermeasure and extended warranty coverage, further investigation of the issue does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov. A detailed discussion of the investigation and related complaint numbers can be viewed in the attached closing report.
PE18013 · Rear Suspension Control Arm Failure
Opened Dec 1, 2018 · Closed Aug 21, 2019
Status: closed (inferred from source dates) · Suspension:rear
PE18-013 was opened on December 1, 2018, with 4 complaints to ODI alleging incidents of the lower control arm fracturing at a connection point to the vehicle chassis due to corrosion. ODI has received an additional 87 complaints since the PE was opened. During PE18-013, Nissan indicated model years 2013-2018 shared a common rear lower control arm design. Nissan provided complaint and warranty data regarding 48 incidents of the subject failure. The majority of the complaints are from vehicles registered in salt belt states. There have been no crashes, injuries, or fatalities confirmed as of this date. Nissan advised that it has conducted testing to assess safety risk. Nissan states that due to low incident rate, high detectability, and low risk of adverse vehicle dynamics, it does not believe the subject lower control arm failure poses an unreasonable risk to motor vehicle safety.This preliminary evaluation has been upgraded to Engineering Analysis (EA) 19-002. During the EA, ODI will continue to collect and analyze complaint and field data in its efforts to fully assess the scope and frequency of the alleged defect. More importantly, ODI will also seek additional information and data regarding the potential safety consequences of rear lower control arm failure, both from evidence collected from field failures and through more rigorous and comprehensive vehicle testing to be conducted by either Nissan and/or NHTSA.The ODI reports (VOQs) cited above can be viewed at NHTSA.gov under the following reference numbers: 11234334, 11234232, 11234189, 11233771, 11233234, 11232381, 11231589, 11230323, 11230184, 11229023, 11229003, 11228730, 11228651, 11228631, 11228625, 11223086, 11222602, 11222427, 11222303, 11221802, 11219943, 11217980, 11217542, 11217505, 11217290, 11210699, 11209647, 11208580, 11208274, 11207545, 11206310, 11205711, 11205461, 11203864, 11203005, 11195416, 11193545, 11193020, 11192269, 11192066, 11191270, 11191207, 11191185, 11191042, 11190360, 11190323, 11187334, 11187157, 11186747, 11186195, 11185664, 11185632, 11185589, 11183799, 11183295, 11183198, 11182705,11182528, 11182265, 11182137, 11182088, 11181373, 11181223, 11181155, 11181009, 11180126, 11176565, 11176261, 11176135, 11175821, 11172604, 11172200, 11172065, 11170019, 11169930, 11165194, 11163833, 11163489, 11162559, 11162195, 11161956, 11161497, 11161117, 11157323, 11157234, 11156772, 11141169, 11139516, 11129476, 11122829, 11114374.
Illustration