THE AUTOMATIC TRANSMISSION UNEXPECTEDLY STOPPED WORKING WHILE I WAS DRIVING THE VEHICLE. NO ACCIDENTS OR INJURIES RESULTED, BUT THIS COULD EASILY HAVE OCCURRED UNDER DIFFERENT CIRCMSTANCES. WHEN I BROUGHT THE VEHICLE TO A KNOWLEDGEABLE TRANSMISSION REPAIR SHOP, THE CHIEF MECHANIC INFORMED ME THAT THERE IS A KNOWN DESIGN FLAW I…
Read full complaint
THE AUTOMATIC TRANSMISSION UNEXPECTEDLY STOPPED WORKING WHILE I WAS DRIVING THE VEHICLE. NO ACCIDENTS OR INJURIES RESULTED, BUT THIS COULD EASILY HAVE OCCURRED UNDER DIFFERENT CIRCMSTANCES. WHEN I BROUGHT THE VEHICLE TO A KNOWLEDGEABLE TRANSMISSION REPAIR SHOP, THE CHIEF MECHANIC INFORMED ME THAT THERE IS A KNOWN DESIGN FLAW IN THIS TRANSMISSION. IN FACT, HE HAD REBUILT MANY OF THESE AND KNEW HOW TO "MODIFY" THE UNIT TO PREVENT FURTHER PROBLEMS. MY QUESTION: DOESN'T THE MANUFACTURER HAVE SOME RESPONSIBILITY HERE? I AM IN THE PROCESS OF CONTACTING NISSAN AND WILL AWAIT THEIR FORMAL RESPONSE. IN THE MEANTIME, CAN YOU HELP ME GET THIS PROBLEM RESOLVED? I AM CONVINCED THERE ARE MANY MORE CONSUMERS OUT THERE DRIVING THESE VEHICLES WHO ARE AT RISK. *AK
NHTSA ODI #702702
Mileage unknown · Jun 1, 1998
Power Train
TRANSMISSION WAS WASHED AND NOW TRANSMISSION WILL NOT SHIFT OUT OF 1ST. VEHICLE HAS SAT FOR OVER A WEEK AND STILL WILL NOT SHIFT OUT OF LOW WHEN IT IS IN DRIVE.
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
Consequence & remedy
Consequence: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED FREE OF CHARGE.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2
RQ99021 · Fuel Leaks From Fuel Injectors
Opened Nov 2, 1999 · Closed May 22, 2000
Status: closed (inferred from source dates) · Vehicle Speed Control:linkages
In October of 1995, Nisan conducted a safety improvement campaign, 95I-006.The campaign recalled Maximas (1985-88), 200SX (1987-88), 300ZX (1984-88, and Infinity M30 (1990-92), for fuel leaking from the fuel injectors.The remedy called for a replacement of the fuel injectors and related hoses on the affected vehicles.The recall was influenced by EA94-018, involving over 680,000 1984-89 Maxima and 300ZX vehicles, and was originally initiated as PE94-018 with 25 complaints, for a complaint rate of 4 per 100K.ODI has received 34 complaints for the 1990-92 Stanzas and 240SXs, for fuel leaking in the engine compartment from the fuel injectors, for a complaint rate of 10 per 100K.Fuel in the presence of an ignition source can lead to a vehicle fire.The purpose of this investigation is to evaluate whether the 1990-92 Stanzas and 240SXs should be recalled.
EA95007 · Takata Seat Belt Buckle Failure
Opened Mar 10, 1995 · Closed Aug 2, 1995
Status: closed (inferred from source dates) · Seat Belts:front:buckle Assembly
There is no summary currently available
1991 Nissan 240SX Problems, Complaints & Recalls | Skip That Year
Illustration