TAKATA RECALL - I'VE CONTACTED TWO DEALERSHIPS (MERCEDES BENZ OF SAN JOSE AND MERCDES BENZ OF STEVENS CREEK) BOTH CONTINUE TO SAY THAT THERE ARE NO PARTS. I DON'T WANT TO GET INJURED BY THE AIRBAG IF THERE IS AN ACCIDENT.
2011 MERCEDES-BENZ E550
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all E550 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
22 reports with mileage · 39 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 32 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Suspension. Review the 20 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
What owners actually said
61 reportsTHE AIRBAG HAS NOT BEEN REPLACED
WE HAVE AN AIR BAG RECALL ON THIS VEHICLE DATING BACK TO FEBRUARY OF 2016. WE WANT IT TO BE REPLACED, SINCE WE HAVE BEEN TOLD THAT IT IS DANGEROUS AS IS.
TL* TAKATA RECALL. THE CONTACT OWNS A 2011 MERCEDES-BENZ E550A. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBERS: 16V081000 (AIR BAGS) AND 16V363000 (AIR BAGS); HOWEVER, THE PART TO DO THE REPAIR WAS UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE D…
Read full complaint
TL* TAKATA RECALL. THE CONTACT OWNS A 2011 MERCEDES-BENZ E550A. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBERS: 16V081000 (AIR BAGS) AND 16V363000 (AIR BAGS); HOWEVER, THE PART TO DO THE REPAIR WAS UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE DEALER WAS CONTACTED (KEELER MOTOR COMPANY, ALBANY, NY, 888-600-3013) AND CONFIRMED THAT THE PARTS WERE NOT AVAILABLE FOR THE RECALL REMEDY. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE AND WAS NOT ABLE TO CONFIRM WHEN THE PARTS WERE TO BECOME AVAILABLE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.
TAKATA RECALL: DEALERSHIP HAS BEEN UNABLE TO REPLACE THE TAKATA AIRBAGS ON MY CAR. NOW TAKATA IS IN BANKRUPTCY, I NEED THE REPLACEMENT OF THE RECALLED AIRBAGS WITH SAFE AIRBAGS IMMEDIATELY.
TAKATA RECALL ISSUED FOR BOTH DRIVER AND PASSENGER AIRBAG IN FEB AND MAY 2016 RESPECTIVELY. HAVE RECEIVED MANY NOTIFICATIONS ABOUT THE RECALL BUT LOCAL DEALER MERCEDES BENZ OF DELRAY ALWAYS STATES THAT PARTS ARE NOT YET AVAILABLE. GIVEN THAT IT'S WELL OVER A YEAR SINCE THE INITIAL RECALL NOTICE WAS RECEIVED IT'S QUITE DISTURBIN…
Read full complaint
TAKATA RECALL ISSUED FOR BOTH DRIVER AND PASSENGER AIRBAG IN FEB AND MAY 2016 RESPECTIVELY. HAVE RECEIVED MANY NOTIFICATIONS ABOUT THE RECALL BUT LOCAL DEALER MERCEDES BENZ OF DELRAY ALWAYS STATES THAT PARTS ARE NOT YET AVAILABLE. GIVEN THAT IT'S WELL OVER A YEAR SINCE THE INITIAL RECALL NOTICE WAS RECEIVED IT'S QUITE DISTURBING THAT REPLACEMENT PARTS ARE STILL NOT AVAILABLE. BECAUSE OF THE UNSAFE NATURE OF THESE AIRBAGS THIS CAR SITS UNUSED IN MY GARAGE, GETS VERY LITTLE USE AND STILL HAVE TO PAY AUTO INSURANCE FOR A CAR I'M NOT COMFORTABLE DRIVING.
AIRMATIC FRONT AIR STRUT/SHOCK FAILURE. THE FRONT LEFT HAS FAILED ON MY CAR. IT HAPPENED WHILE DRIVING AND A SHORT WHILE AFTER AN ACCIDENT AND THE TWO MAY BE RELATED DUE TO THE BRAKING FORCES PUTTING PRESSURE ON THE FRONT STRUTS. THE FAILURE DID NOT HAPPEN IMMEDIATELY AFTER THE CRASH. HOWEVER, ABOUT A MONTH LATER, OR SO, THE C…
Read full complaint
AIRMATIC FRONT AIR STRUT/SHOCK FAILURE. THE FRONT LEFT HAS FAILED ON MY CAR. IT HAPPENED WHILE DRIVING AND A SHORT WHILE AFTER AN ACCIDENT AND THE TWO MAY BE RELATED DUE TO THE BRAKING FORCES PUTTING PRESSURE ON THE FRONT STRUTS. THE FAILURE DID NOT HAPPEN IMMEDIATELY AFTER THE CRASH. HOWEVER, ABOUT A MONTH LATER, OR SO, THE CAR LOWERED AND RED WARNING LIGHT CAME ON WITH A WARNING TO TO "PULL OVER AND STOP DRIVING IMMEDIATELY". I WAS DRIVING NORMALLY, BUT I HAD THE ACCIDENT IN LATE JUNE. ALSO, IN ADDITION THE THE TEMPORAL OCCURRENCE OF MY ACCIDENT, THE STRUTS APPEAR DEFECTIVE JUDGING BY COMPLAINTS ON MERCEDES FORUMS. THIS IS A SAFETY ISSUE BECAUSE THE CAR LOWERS, THE SUSPENSION HITS BOTTOM AND THE TIRES RUB ON THE FENDERS MAKING STEERING IMPOSSIBLE.
THE FRONT AIR SUSPENSION DROPS (BOTH SIDES AT THE SAME TIME) AT RANDOM TIMES -- SOMETIMES WHILE PARKED AND SOMETIMES WHILE DRIVING. I HAVE SPENT $1,116.53 SO FAR AND HAVE REPLACED THE PRE-FUSE BOX, RELAY, AND VALVE UNIT. THE SAME PROBLEM PERSISTS. THE DEALER AND A PRIVATE REPAIR SHOP ARE STUMPED AS TO WHAT THE PROBLEM IS. SE…
Read full complaint
THE FRONT AIR SUSPENSION DROPS (BOTH SIDES AT THE SAME TIME) AT RANDOM TIMES -- SOMETIMES WHILE PARKED AND SOMETIMES WHILE DRIVING. I HAVE SPENT $1,116.53 SO FAR AND HAVE REPLACED THE PRE-FUSE BOX, RELAY, AND VALVE UNIT. THE SAME PROBLEM PERSISTS. THE DEALER AND A PRIVATE REPAIR SHOP ARE STUMPED AS TO WHAT THE PROBLEM IS. SEEMS LIKE A FREQUENT PROBLEM REPORTED ONLINE BY MANY OWNERS AND THAT MB SHOULD TAKE CARE OF THIS FAULTY DESIGN.
TAKATA RECALL MY FRONT AIR SUSPENSION LEAKS ALL THE TIME A LOT
TL* THE CONTACT OWNS A 2011 MERCEDES-BENZ E550. WHEN THE DRIVER RETURNED TO HER PARKED VEHICLE, THE REAR OF THE VEHICLE WAS CRASHED. THE VEHICLE WAS TAKEN TO A COLLISION CENTER AND THE COSMETIC REPAIRS WERE PERFORMED. AFTERWARDS, THE CONTACT BEGAN TO EXPERIENCE A LEAK ABOVE THE REARVIEW MIRROR. THE FAILURE WAS PERSISTENT. THE VE…
Read full complaint
TL* THE CONTACT OWNS A 2011 MERCEDES-BENZ E550. WHEN THE DRIVER RETURNED TO HER PARKED VEHICLE, THE REAR OF THE VEHICLE WAS CRASHED. THE VEHICLE WAS TAKEN TO A COLLISION CENTER AND THE COSMETIC REPAIRS WERE PERFORMED. AFTERWARDS, THE CONTACT BEGAN TO EXPERIENCE A LEAK ABOVE THE REARVIEW MIRROR. THE FAILURE WAS PERSISTENT. THE VEHICLE WAS TAKEN TO A LOCAL DEALER (TAFEL MOTOR COMPANY 4156 SHELBYVILLE ROAD, LOUISVILLE, KY 40207), BUT THE CAUSE OF THE FAILURE WAS NOT DETERMINED. THE VEHICLE WAS NOT REPAIRED. THE VEHICLE WAS INSPECTED BY A SUN ROOF TECHNICIAN WHO DIAGNOSED THAT THE WINDSHIELD WAS DETACHED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE AND ADVISED THE CONTACT TO TAKE THE VEHICLE TO THE LOCAL DEALER. THE MANUFACTURER ALSO STATED THAT THERE WAS A RECALL FOR A DIFFERENT MODEL VEHICLE. THE FAILURE MILEAGE WAS APPROXIMATELY 83,000.
Official recalls
319V010000 · Air Bags:frontal:passenger Side:inflator Module
Jan 9, 2019
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014 C250, C300 4Matic, C350, C63 AMG, E350 4Matic Coupe, E350 Cabrio, E350 Coupe, SLS AMG Cabrio, SLS AMG Coupe, 2014-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, GLK 350, GLK250 BlueTec 4Matic, GLK350 RWD, 2015-2017 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2014-2017 E550 Cabrio, and 2014-2016 E550 Coupe vehicles sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally, MBUSA is recalling certain 2012-2014 C250, E350 4Matic Coupe, SLS AMG Cabrio, 2012-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, 2011 C300, 2011-2014 C300 4Matic, C350, C63 AMG, E350 Cabrio, E350 Coupe, SLS AMG Coupe, 2015-2016 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2011-2016 E550 Cabrio, E550 Coupe, 2011-2015 GLK350 4Matic, GLK350 RWD, and 2013-2015 GLK250 BlueTec 4Matic vehicles ever registered in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." MBUSA is also recalling certain 2012-2014 C250, E350 4Matic Coupe, SLS AMG Cabrio 2012-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, 2010-2011 C300, 2010-2014 C300 4Matic, C350, C63 AMG, E350 Coupe, 2011-2014 E350 Cabrio, SLS AMG Coupe, 2015-2016 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2016-2017 E550 Cabrio, 2010-2016 E550 Coupe, 2010-2015 GLK350 4Matic, GLK350 RWD, and 2013-2015 GLK250 BlueTec 4Matic vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MO, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI and WY or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the passenger or other occupants resulting in serious injury or death.
Remedy: MBUSA will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 29, 2019. Owners may contact MBUSA customer service at 1-800-367-6372.
16V363000 · Air Bags:frontal:passenger Side:inflator Module
May 26, 2016
Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2008-2011 C300 Sedan, C300 4matic Sedan, C350 Sedan, C63 AMG Sedan vehicles, 2010-2011 GLK350, GLK350 4-Matic and E350 Coupe vehicles, 2011 SLS AMG, E350 Convertible, E550 Coupe and E550 Convertible vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, MBUSA is recalling certain model year 2008 C300 Sedan, C350 Sedan, C63 AMG Sedan and C300 4-Matic Sedan vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Vehicles not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence & remedy
Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy: MBUSA will notify owners, and dealers will replace the passenger frontal air bag modules, free of charge. Owners were sent an interim notification October 2016. A second notice will be mailed when remedy parts are available. Owners may contact MBUSA customer service at 1-877-496-3691.
16V081000 · Air Bags:frontal:driver Side:inflator Module
Feb 11, 2016
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2009-2010 ML320 BlueTec 4Matic, GL320 BlueTec 4Matic and R320 CDI 4Matic, 2011 E350 Cabriolet and E550 Cabriolet, 2009-2011 ML350, ML350 4Matic, ML550 4Matic, ML63 AMG, and C63 AMG, 2010-2011 ML450 4Matic Hybrid, E350 Coupe, E350 4Matic, E550 Coupe, E550 4Matic, and E63 AMG, 2011-2012 GL350 BlueTec 4Matic and R350 BlueTec 4Matic, 2009-2012 GL450 4Matic, GL550 4Matic and R350 4Matic, 2007-2008 SLK280, SLK350, and SLK55 AMG, 2011-2014 SLS AMG Coupe, 2012 SLS AMG Cabriolet, 2013-2014 SLS AMG GT and SLS AMG GT Cabriolet, 2005 C230 Kompressor and C320, 2006-2007 C230, 2006-2011 C350, 2008-2011 C300 and C300 4Matic, 2010-2012 GLK350 and GLK350 4Matic and 2007-2008 Chrysler Crossfire vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
Consequence & remedy
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: MBUSA will their notify owners, and Fiat Chrysler will notify the affected Chrysler owners. Dealers for the respective brands will replace the driver's frontal air bag module, free of charge. This recall began November 2016. Mercedes-Benz owners may contact MBUSA customer service at 1-800-367-6372 and Chrysler owners may contact Fiat Chrysler customer service at 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Illustration