Rear subframe broke off.
2011 MERCEDES-BENZ C300
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2011 MERCEDES-BENZ C300 do not stand out strongly from the model-year median of 259.
About this comparison →How this year compares
Owner complaints by model year
Compare all C300 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
141 reports with mileage · 339 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 250 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Suspension. Review the 60 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 49 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
Structure complaints
49 reports2011 MERCEDES BENZ C300. CONSTITUENT WRITES REGARDING SUBFRAME CORROSION SAFETY RECALL ON VEHICLE. THE CONSUMER STATED THE MANUFACTURER WAS NOTIFIED, BUT WOULD NOT TAKE RESPOSIBILITY FOR THE FAILURE. THE MANUFACTURER OFFERED A GOOD WILL INCENTIVE OF $500.00 TOWARDS A USED VEHICLE OR 1000.00 TOWARDS THE PURCHASE OF A NEW VEHICLE…
Read full complaint
2011 MERCEDES BENZ C300. CONSTITUENT WRITES REGARDING SUBFRAME CORROSION SAFETY RECALL ON VEHICLE. THE CONSUMER STATED THE MANUFACTURER WAS NOTIFIED, BUT WOULD NOT TAKE RESPOSIBILITY FOR THE FAILURE. THE MANUFACTURER OFFERED A GOOD WILL INCENTIVE OF $500.00 TOWARDS A USED VEHICLE OR 1000.00 TOWARDS THE PURCHASE OF A NEW VEHICLE.
The contact owns a 2011 Mercedes-Benz C300. The contact stated while driving 25 MPH, the contact was going around a corner when he noticed a vehicle in front. The contact depressed on the brake pedal and the vehicle violently jerked and stop. The contact stated that the steering wheel was leaning towards the left. The contact wa…
Read full complaint
The contact owns a 2011 Mercedes-Benz C300. The contact stated while driving 25 MPH, the contact was going around a corner when he noticed a vehicle in front. The contact depressed on the brake pedal and the vehicle violently jerked and stop. The contact stated that the steering wheel was leaning towards the left. The contact was able to drive the vehicle to his residence. The following day the contact took the vehicle to an independent mechanic who inspected the vehicle and diagnosed the failure as a fractured and detached rear control arm due to corrosion of the undercarriage and subframe. The vehicle was towed to a local dealer to be repaired however, the contact declined the repair due to cost. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 82,000.
On July 1, my daugther who is driving the car since about 8 months noticed a strange noise coming from the rear of the car. Since I was in Europe at that time I could not give her any assistance. On July 16 we both took a drive to Rhode Island to visit a college. I was the one driving, and I could also hear the noise coming from…
Read full complaint
On July 1, my daugther who is driving the car since about 8 months noticed a strange noise coming from the rear of the car. Since I was in Europe at that time I could not give her any assistance. On July 16 we both took a drive to Rhode Island to visit a college. I was the one driving, and I could also hear the noise coming from the rear. On the highway there was a back-up developing and I had to hit the brakes a littler harder. In doing so. the car was very unstable and it look like if the rear was going to overtake the front of the car. I was very scary even for myself who is a long time experience driver. After returning home I took the car to a mechanic and have him look at it. The resulting diagnosis revealed that the subframe was completely rusted out and was about to get disconnected from the under carriage of the car at any moment. The mechanic had a hard time to find a replacement part, and was finally able to locate an OEM subframe in California, the only one in the US. The price for the part alone was $1,500. I had no choice other than to have the car repaired at the mechanic since it was at that time undrivable. The total repair was almost $3,200. I took 2 pictures of the replaced subframe (see attached). The car is a 2011 MB C300-4-matic with just 100,800 miles on it. The was purchased used, with about 12,000 miles, in Febr. 2012 from Mercedes Benz of Westford, MA, which had used the car as a loaner/company car. The car was well maintained, used up until 2020 by my daughter's mother. She then bought herself another, newer C300 (2017 model) and decided to gift her older car to the daughter instead of trading it in. We thought, we knew a lot about the car and considered it a low risk transfer for a new, still learning driver. I will also file a formal complaint with Mercedes Benz if I have figured out the correct contact point. The internet shows, other people have experienced similar situations. And eventually, see also your ID-# 10504684 and 11023618.
THE CONTACT OWNS A 2011 MERCEDES BENZ C300. THE CONTACT STATED WHILE DRIVING, THERE WAS A CLUNKING SOUND COMING FROM THE REAR OF THE VEHICLE. THE VEHICLE WAS EXAMINED BY AN INDEPENDENT MECHANIC WHO DISCOVERED THAT THE PASSENGER'S SIDE REAR SUB-FRAME HAD CRACKED AND SEPARATED. THE CAUSE OF THE FAILURE WAS NOT DETERMINED. THE VEHI…
Read full complaint
THE CONTACT OWNS A 2011 MERCEDES BENZ C300. THE CONTACT STATED WHILE DRIVING, THERE WAS A CLUNKING SOUND COMING FROM THE REAR OF THE VEHICLE. THE VEHICLE WAS EXAMINED BY AN INDEPENDENT MECHANIC WHO DISCOVERED THAT THE PASSENGER'S SIDE REAR SUB-FRAME HAD CRACKED AND SEPARATED. THE CAUSE OF THE FAILURE WAS NOT DETERMINED. THE VEHICLE WAS NOT YET REPAIRED. THE LOCAL DEALER WAS NOTIFIED OF THE FAILURE. THE MANUFACTURER WAS NOT YET CONTACTED. THE FAILURE MILEAGE WAS 138,000
REAR SUSPENSION CONTROL ARM RUSTS OFF OF THE SUBFRAME. NO OTHER RUST ON THE CAR. DURING BRAKING THE CAR STEERS HARD TO THE RIGHT ALMOST CAUSING AN ACCIDENT
TL* THE CONTACT OWNS A 2011 MERCEDES-BENZ C300. WHILE DRIVING 35 MPH, THE REAR DRIVER'S SIDE OF THE VEHICLE VEERED TO THE LEFT. THE CONTACT IMMEDIATELY APPLIED THE BRAKES. THE CONTACT DROVE TO AN INDEPENDENT MECHANIC WHO DIAGNOSED THAT THE REAR DRIVER'S SIDE SUBFRAME AND DRIVER'S SIDE CONTROL ARM NEEDED TO BE REPLACED. THE VEHIC…
Read full complaint
TL* THE CONTACT OWNS A 2011 MERCEDES-BENZ C300. WHILE DRIVING 35 MPH, THE REAR DRIVER'S SIDE OF THE VEHICLE VEERED TO THE LEFT. THE CONTACT IMMEDIATELY APPLIED THE BRAKES. THE CONTACT DROVE TO AN INDEPENDENT MECHANIC WHO DIAGNOSED THAT THE REAR DRIVER'S SIDE SUBFRAME AND DRIVER'S SIDE CONTROL ARM NEEDED TO BE REPLACED. THE VEHICLE WAS REPAIRED. THE DEALER WAS NOT CONTACTED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND DID NOT ASSIST. THE FAILURE MILEAGE WAS APPROXIMATELY 60,000. *AS *TR
THIS IS A WELL DOCUMENTED ACCIDENT AS IT INVOLVED A POLICE CHASE OF A FELON WHO RAN A RED LIGHT AT APPROXIMATELY 50 MPH. MY CAR WAS HIT ON THE LEFT FRONT SIDE AND IS DEEMED TOTALED. NO AIR BAGS DEPLOYED IN MY VEHICLE AND I REQUIRED EMERGENCY TRANSPORT TO THE LOCAL HOSPITAL EMERGENCY ROOM. THIS ALSO INVOLVED A POLICE SHOOTING I…
Read full complaint
THIS IS A WELL DOCUMENTED ACCIDENT AS IT INVOLVED A POLICE CHASE OF A FELON WHO RAN A RED LIGHT AT APPROXIMATELY 50 MPH. MY CAR WAS HIT ON THE LEFT FRONT SIDE AND IS DEEMED TOTALED. NO AIR BAGS DEPLOYED IN MY VEHICLE AND I REQUIRED EMERGENCY TRANSPORT TO THE LOCAL HOSPITAL EMERGENCY ROOM. THIS ALSO INVOLVED A POLICE SHOOTING INCIDENT WITH THE DEATH OF THE OTHER DRIVER. THE VEHICLE IS PENDING TOWING TO A SALVAGE YARD.THE PRIMARY CONCERN IS A QUESTION OF DEFECTIVE AIR BAG DEPLOYMENT AND FUTURE POTENTIAL INJURY TO OTHERS.
THE PASSENGER SIDE OF THE CAR GOT FLOODED WITH WATER. THE DEALERSHIP FOUND THAT THE LEAK WAS FROM THE RIGHT SIDE SUNROOF DRAIN AND THAT THEY WOULD HAVE TO REMOVE THE HEADLINER AND PASSENGER SIDE INTERIOR CARPETING TO ACCESS THE AFFECTED AREAS. THE $795 ESTIMATE BALLOONED TO $1600 WHEN THEY SAID THAT THE SEATING WOULD HAVE TO B…
Read full complaint
THE PASSENGER SIDE OF THE CAR GOT FLOODED WITH WATER. THE DEALERSHIP FOUND THAT THE LEAK WAS FROM THE RIGHT SIDE SUNROOF DRAIN AND THAT THEY WOULD HAVE TO REMOVE THE HEADLINER AND PASSENGER SIDE INTERIOR CARPETING TO ACCESS THE AFFECTED AREAS. THE $795 ESTIMATE BALLOONED TO $1600 WHEN THEY SAID THAT THE SEATING WOULD HAVE TO BE REMOVED TO REMOVE THE ENTIRE CARPET BECAUSE THERE WAS MORE WATER THAT HAD GOTTEN INTO THE CAR THAN THEY ORIGINALLY THOUGHT! THIS SOUNDS LIKE A DESIGN DEFECT IN THIS VEHICLE! THIS COULD BE DANGEROUS WITH THE ELECTRIC POWER AND HEATED SEATS! *TR
Official recalls
619V010000 · Air Bags:frontal:passenger Side:inflator Module
Jan 9, 2019
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014 C250, C300 4Matic, C350, C63 AMG, E350 4Matic Coupe, E350 Cabrio, E350 Coupe, SLS AMG Cabrio, SLS AMG Coupe, 2014-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, GLK 350, GLK250 BlueTec 4Matic, GLK350 RWD, 2015-2017 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2014-2017 E550 Cabrio, and 2014-2016 E550 Coupe vehicles sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally, MBUSA is recalling certain 2012-2014 C250, E350 4Matic Coupe, SLS AMG Cabrio, 2012-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, 2011 C300, 2011-2014 C300 4Matic, C350, C63 AMG, E350 Cabrio, E350 Coupe, SLS AMG Coupe, 2015-2016 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2011-2016 E550 Cabrio, E550 Coupe, 2011-2015 GLK350 4Matic, GLK350 RWD, and 2013-2015 GLK250 BlueTec 4Matic vehicles ever registered in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." MBUSA is also recalling certain 2012-2014 C250, E350 4Matic Coupe, SLS AMG Cabrio 2012-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, 2010-2011 C300, 2010-2014 C300 4Matic, C350, C63 AMG, E350 Coupe, 2011-2014 E350 Cabrio, SLS AMG Coupe, 2015-2016 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2016-2017 E550 Cabrio, 2010-2016 E550 Coupe, 2010-2015 GLK350 4Matic, GLK350 RWD, and 2013-2015 GLK250 BlueTec 4Matic vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MO, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI and WY or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the passenger or other occupants resulting in serious injury or death.
Remedy: MBUSA will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 29, 2019. Owners may contact MBUSA customer service at 1-800-367-6372.
17V177000 · Air Bags:frontal:sensor/control MODULE-INACTIVE ; Electrical System:software
Mar 14, 2017
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 AMG GT-S, GLC300, CLA250 and GLE300d 4Matic vehicles, 2013 C250, E350 BlueTec and G63 AMG vehicles, 2008-2014 C300 vehicles, 2013-2014 C300 4Matic and ML350 4Matic vehicles, 2009 C350 vehicles, 2014 CLS550, E350 4Matic, E350 Coupe 4Matic, E350 Wagon 4Matic, GLK350 and SL550 vehicles, 2012 CLS550 4Matic vehicles, 2012-2016 E350 vehicles, 2016-2017 GL450 4Matic vehicles, 2012-2014 ML350 4Matic BlueTec vehicles, 2015 S550, S550 4Matic and C300 4Matic Sedan vehicles, 2015-2016 C300 Sedan vehicles, and 2017 SL63 AMG vehicles. Various control units on these vehicles may have been updated with incorrect software, potentially affecting the correct deployment of the air bags in the event of a crash.
Consequence & remedy
Consequence: If the air bags do not deploy as intended in the event of a crash, there would be an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will update software in the affected control units, free of charge. The recall began April 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
Additional source detail variants (2)
Electrical System:software
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 AMG GT-S, GLC300, CLA250 and GLE300d 4Matic vehicles, 2013 C250, E350 BlueTec and G63 AMG vehicles, 2008-2014 C300 vehicles, 2013-2014 C300 4Matic and ML350 4Matic vehicles, 2009 C350 vehicles, 2014 CLS550, E350 4Matic, E350 Coupe 4Matic, E350 Wagon 4Matic, GLK350 and SL550 vehicles, 2012 CLS550 4Matic vehicles, 2012-2016 E350 vehicles, 2016-2017 GL450 4Matic vehicles, 2012-2014 ML350 4Matic BlueTec vehicles, 2015 S550, S550 4Matic and C300 4Matic Sedan vehicles, 2015-2016 C300 Sedan vehicles, and 2017 SL63 AMG vehicles. Various control units on these vehicles may have been updated with incorrect software, potentially affecting the correct deployment of the air bags in the event of a crash.
Consequence: If the air bags do not deploy as intended in the event of a crash, there would be an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will update software in the affected control units, free of charge. The recall began April 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
Air Bags:frontal:sensor/control MODULE-INACTIVE
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 AMG GT-S, GLC300, CLA250 and GLE300d 4Matic vehicles, 2013 C250, E350 BlueTec and G63 AMG vehicles, 2008-2014 C300 vehicles, 2013-2014 C300 4Matic and ML350 4Matic vehicles, 2009 C350 vehicles, 2014 CLS550, E350 4Matic, E350 Coupe 4Matic, E350 Wagon 4Matic, GLK350 and SL550 vehicles, 2012 CLS550 4Matic vehicles, 2012-2016 E350 vehicles, 2016-2017 GL450 4Matic vehicles, 2012-2014 ML350 4Matic BlueTec vehicles, 2015 S550, S550 4Matic and C300 4Matic Sedan vehicles, 2015-2016 C300 Sedan vehicles, and 2017 SL63 AMG vehicles. Various control units on these vehicles may have been updated with incorrect software, potentially affecting the correct deployment of the air bags in the event of a crash.
Consequence: If the air bags do not deploy as intended in the event of a crash, there would be an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will update software in the affected control units, free of charge. The recall began April 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
16V363000 · Air Bags:frontal:passenger Side:inflator Module
May 26, 2016
Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2008-2011 C300 Sedan, C300 4matic Sedan, C350 Sedan, C63 AMG Sedan vehicles, 2010-2011 GLK350, GLK350 4-Matic and E350 Coupe vehicles, 2011 SLS AMG, E350 Convertible, E550 Coupe and E550 Convertible vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, MBUSA is recalling certain model year 2008 C300 Sedan, C350 Sedan, C63 AMG Sedan and C300 4-Matic Sedan vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Vehicles not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence & remedy
Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy: MBUSA will notify owners, and dealers will replace the passenger frontal air bag modules, free of charge. Owners were sent an interim notification October 2016. A second notice will be mailed when remedy parts are available. Owners may contact MBUSA customer service at 1-877-496-3691.
16V081000 · Air Bags:frontal:driver Side:inflator Module
Feb 11, 2016
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2009-2010 ML320 BlueTec 4Matic, GL320 BlueTec 4Matic and R320 CDI 4Matic, 2011 E350 Cabriolet and E550 Cabriolet, 2009-2011 ML350, ML350 4Matic, ML550 4Matic, ML63 AMG, and C63 AMG, 2010-2011 ML450 4Matic Hybrid, E350 Coupe, E350 4Matic, E550 Coupe, E550 4Matic, and E63 AMG, 2011-2012 GL350 BlueTec 4Matic and R350 BlueTec 4Matic, 2009-2012 GL450 4Matic, GL550 4Matic and R350 4Matic, 2007-2008 SLK280, SLK350, and SLK55 AMG, 2011-2014 SLS AMG Coupe, 2012 SLS AMG Cabriolet, 2013-2014 SLS AMG GT and SLS AMG GT Cabriolet, 2005 C230 Kompressor and C320, 2006-2007 C230, 2006-2011 C350, 2008-2011 C300 and C300 4Matic, 2010-2012 GLK350 and GLK350 4Matic and 2007-2008 Chrysler Crossfire vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
Consequence & remedy
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: MBUSA will their notify owners, and Fiat Chrysler will notify the affected Chrysler owners. Dealers for the respective brands will replace the driver's frontal air bag module, free of charge. This recall began November 2016. Mercedes-Benz owners may contact MBUSA customer service at 1-800-367-6372 and Chrysler owners may contact Fiat Chrysler customer service at 1-800-853-1403.
14V177000 · Exterior Lighting:tail Lights
Apr 11, 2014
Mercedes-Benz USA, LLC (Mercedes) is recalling certain model year 2008-2011 C300, C300 4Matic, C350, and C63 AMG vehicles manufactured January 26, 2007, through July 13, 2011. In the affected vehicles, a poor electrical ground connection may result in the dimming or failure of the tail lights.
Consequence & remedy
Consequence: Dimming or failure of the tail lights reduces the ability to warn other motorists of the driver's intentions of stopping or turning, increasing the risk of a crash.
Remedy: Mercedes will notify owners, and dealers will replace the bulb holders if not previously updated and replace any corroded connectors, free of charge. The recall began on August, 18, 2014. Owners may contact Mercedes at 1-800-367-6372.
12V557000 · Fuel System, Gasoline
Dec 3, 2012
Mercedes-Benz is recalling certain model year 2011-2012 S400, S550, S550 4Matic, S63 AMG, C300, C300 4Matic, E350, GLK350, GLK350 4Matic, CL550 4Matic, and CL63 AMG vehicles manufactured from April 18, 2011, through July 12, 2011. Due to an irregularity stemming from the molding process of the fuel filter flange, the fuel filter flange may crack when operated in high temperatures.
Consequence & remedy
Consequence: If the fuel filter flange cracks, it will leak fuel which may lead to a fire if an external ignition source is present.
Remedy: Mercedes-Benz will notify owners, and dealers will replace the fuel filter, free of charge. The recall campaign is expected to begin in February 2013. Owners may contact Mercedes-Benz at 1-800-367-6372.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Illustration