← New search

2014 MERCEDES-BENZ C250

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2014 MERCEDES-BENZ C250 do not stand out strongly from the model-year median of 163.

About this comparison →

When problems were reported

Mileage at the reported incident

66 reports with mileage · 97 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Air Bags. Review the 93 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Engine. Review the 22 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Steering. Review the 18 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

13 crash reports4 fire reports9 injury reports

Air Bags complaints

93 reports
Clear category filter
111,300 miles · Nov 21, 2025
Air Bags

The contact owns a 2014 Mercedes-Benz C-250. The contact stated that the driver’s side seat air bag warning light was illuminated. The air bag was visible through the seat and was able to be moved manually. The vehicle was taken to a certified mechanic but was not diagnosed. The vehicle was not repaired. The contact related the …

Read full complaint

The contact owns a 2014 Mercedes-Benz C-250. The contact stated that the driver’s side seat air bag warning light was illuminated. The air bag was visible through the seat and was able to be moved manually. The vehicle was taken to a certified mechanic but was not diagnosed. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 19V010000 (Air Bags); however, the VIN was not included in the recall, and the recall referenced the front passenger’s seat air bag. The manufacturer was not informed of the failure. The failure mileage was approximately 111,300.

NHTSA ODI #11700868

Mileage unknown · Jun 18, 2024
Air Bags

The contact owned a 2014 Mercedes-Benz C250. The contact received notification of NHTSA Campaign Number: 19V010000 (Air Bags) and requested to be removed from the recall distribution list. The manufacturer was contacted regarding the issue. The local dealer was not notified.

NHTSA ODI #11595111

Mileage unknown · Jun 5, 2024
Air Bags

The passenger airbag was replaced under the Takata recall. Recently the airbag indicator light came on for the driver airbag. We have been notified by the dealership that this airbag needs replaced. They provided an estimate of $2,652.29. We reached out to Mercedes due to this being a safety issue and also due to the fact th…

Read full complaint

The passenger airbag was replaced under the Takata recall. Recently the airbag indicator light came on for the driver airbag. We have been notified by the dealership that this airbag needs replaced. They provided an estimate of $2,652.29. We reached out to Mercedes due to this being a safety issue and also due to the fact that the passenger airbag was replaced under a recall. They are unwilling to assist. It is illogical that just the passenger airbag is faulty in the recall but that the driver's airbag is fine as they came from the same manufacturer and installed when the vehicle was built. We are concerned about either deploying on its own or if it will deploy in an accident.

NHTSA ODI #11592656

Mileage unknown · Aug 21, 2023
Air BagsStructureWheelsCrashInjury

unknown but I have submitted a previous complaint.

NHTSA ODI #11539690

Mileage unknown · Feb 15, 2023
Air BagsCrashInjury

I was in an accident that caused my car to be a total loss. I was hit near the front left side, close to the driver's door. The airbag did not deploy despite the hard impact. I am currently having to go to therapy due to impact. My right lower arm was bruised from the impact, and I was in a lot of pain due to the bruising caused…

Read full complaint

I was in an accident that caused my car to be a total loss. I was hit near the front left side, close to the driver's door. The airbag did not deploy despite the hard impact. I am currently having to go to therapy due to impact. My right lower arm was bruised from the impact, and I was in a lot of pain due to the bruising caused. I am assuming the bruising came from the hit to the steering wheel. I was never notified of an airbag recall.

NHTSA ODI #11507530

Mileage unknown · Jan 27, 2023
Air BagsCrashInjury

unknown

NHTSA ODI #11504073

Mileage unknown · Dec 6, 2022
Air BagsCrash

Collision and airbags didn’t go off but should of cause recall and now totaled [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI #11496328

Mileage unknown · Jul 25, 2022
Air Bags

MANUFACTURER UNABLE TO REPAIR RECALLED PARTS DUE TO THERE ARE NO MERCEDES BENZ AUTHORIZED SERVICE SITE IN GUAM ACCORDING TO THEIR CUSTOMER-ADVOCACY OFFICE. I AM IN THE PROCESS IN SHIPPING MY CAR BACK TO CALIFORNIA, THROUGH THE MILITARY, BUT THIS MAY AFFECT IT UNLESS IT GETS RESOLVED. PLEASE ADVISE.

NHTSA ODI #11475808

60,000 miles · Jul 20, 2021
Air BagsService BrakesCrashInjury

The contact owns a 2014 Mercedes-Benz C250. The contact stated that while her daughter was driving at various speeds, she depressed the brake pedal but it hesitated to respond. As a result, excessive force was applied to the brake pedal in order to slow down the vehicle. Due to the failure, the driver lost control of the vehicle…

Read full complaint

The contact owns a 2014 Mercedes-Benz C250. The contact stated that while her daughter was driving at various speeds, she depressed the brake pedal but it hesitated to respond. As a result, excessive force was applied to the brake pedal in order to slow down the vehicle. Due to the failure, the driver lost control of the vehicle and crashed into the barrier wall and the metal fence. No air bags were deployed. The contact's daughter sustained a fractured nose, lip laceration, and other unknown facial injuries due to the driver hitting the steering wheel during the impact. No medical attention was contacted yet but will be in the future. A police report was filed. The police transferred the vehicle from the crash site to a tow yard where the police are awaiting the insurance adjustor. Damages were to the front end. The manufacturer nor the dealer was contacted about the failure. The failure mileage was approximate 60,000

NHTSA ODI #11425686

Mileage unknown · Jul 10, 2021
Air Bags

The current vehicle I have, is suppose to have a back up camera as part of being the basic standard for a 2014 C- class mercedes Benz. Ive asked the place I bought he car from and also Ed hicks imports, who also legally sells mercedes Benz in Corpus Christi, to install one, especially because according to the vin reports I boug…

Read full complaint

The current vehicle I have, is suppose to have a back up camera as part of being the basic standard for a 2014 C- class mercedes Benz. Ive asked the place I bought he car from and also Ed hicks imports, who also legally sells mercedes Benz in Corpus Christi, to install one, especially because according to the vin reports I bought, it was initially on the vehicle. I was even willing to pay them to install a factory made original MB backup camera that should’ve been there in the first place but they tell me to go buy an aftermarket! After further research, it turns out mercedes Benz makes all their cars with backup cameras or the PARKTRONIC option which is added sensors !!! Before my car was even brought over to the USA in 2014! Yes, all of these issues have been confirmed by another dealer, which is auto nation here!!!! Besides that, Ed hicks imports supposedly fixed two factory recalls with my car, where one was if the airbag on the passenger front side goes off, it would kill or harm, myself, and any occupants in the vehicle due to the metal fragments that would also burst and pierce, or exit through our bodies. However, my airbag notification comes on every time someone is in the front passenger seat as a warning, as well as my own driver side airbag that just started coming up when I turn on my vehicle. The steering is not fully mounted straight either, so it’s causing me a ton of gas to get to the closest places in town, as well as having me turn the wheel twice as much as I normally would need to on a car with a steering wheel properly mounted, which makes the time for me to finally turn my vehicle at any given time to turn a lot slower than other drivers around me. The last thing is the body of my vehicle not be big properly aligned, I did not know the car had been in ANY accidents, and recently discovered it’s been in 7 !!!so it makes sense why the whole chassis resembles a Chopshop car All of these parts of my vehicle are available for inspection

NHTSA ODI #11424176

Official recalls

5

21V638000 · Air Bags:frontal

Aug 13, 2021

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2015-2016 E400 Coupe, 2012-2015 C250 Coupe, C350 Coupe, C63 AMG Coupe, 2011-2014 E350 Coupe, and 2012-2014 E350 Cabrio vehicles. An incorrect front passenger air bag may have been installed during a prior repair.

Consequence & remedy

Consequence: An incorrect air bag may not function properly in a crash, increasing the risk of injury.

Remedy: Dealers will replace the front passenger air bag on the affected vehicles, free of charge. Owner notification letters were mailed on September 10, 2021. Owners may contact MBUSA customer service at 1-800-367-6372.

19V787000 · Communication

Nov 1, 2019

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2013-2017 vehicles due to a software fault that may cause the date and time for the emergency call system (eCall) to differ from the actual date and time, potentially relaying an inaccurate vehicle location. For a full list of the affected models visit: https://static.nhtsa.gov/odi/rcl/2019/RMISC-19V787-4620.pdf

Consequence & remedy

Consequence: An inaccurate vehicle location may delay emergency responders, increasing the risk of injury.

Remedy: MBUSA has initiated an Over the Air (OTA) remote update. MBUSA will also notify owners, and dealers will check software for a successful OTA or update the communication module software as needed, free of charge. The recall began December 23, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2019120008.

19V010000 · Air Bags:frontal:passenger Side:inflator Module

Jan 9, 2019

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014 C250, C300 4Matic, C350, C63 AMG, E350 4Matic Coupe, E350 Cabrio, E350 Coupe, SLS AMG Cabrio, SLS AMG Coupe, 2014-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, GLK 350, GLK250 BlueTec 4Matic, GLK350 RWD, 2015-2017 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2014-2017 E550 Cabrio, and 2014-2016 E550 Coupe vehicles sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally, MBUSA is recalling certain 2012-2014 C250, E350 4Matic Coupe, SLS AMG Cabrio, 2012-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, 2011 C300, 2011-2014 C300 4Matic, C350, C63 AMG, E350 Cabrio, E350 Coupe, SLS AMG Coupe, 2015-2016 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2011-2016 E550 Cabrio, E550 Coupe, 2011-2015 GLK350 4Matic, GLK350 RWD, and 2013-2015 GLK250 BlueTec 4Matic vehicles ever registered in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." MBUSA is also recalling certain 2012-2014 C250, E350 4Matic Coupe, SLS AMG Cabrio 2012-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, 2010-2011 C300, 2010-2014 C300 4Matic, C350, C63 AMG, E350 Coupe, 2011-2014 E350 Cabrio, SLS AMG Coupe, 2015-2016 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2016-2017 E550 Cabrio, 2010-2016 E550 Coupe, 2010-2015 GLK350 4Matic, GLK350 RWD, and 2013-2015 GLK250 BlueTec 4Matic vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MO, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI and WY or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the passenger or other occupants resulting in serious injury or death.

Remedy: MBUSA will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 29, 2019. Owners may contact MBUSA customer service at 1-800-367-6372.

17V627000 · Air Bags:frontal

Oct 6, 2017

Mercedes-Benz USA, LLC. (MBUSA) is recalling these vehicles: 2014-2018 CLA250, CLA250 4Matic, CLA45 AMG 4Matic, 2015-2018 GLA250, GLA250 4Matic, GLA45 AMG 4Matic, C300 4Matic, C63S AMG, 2012-2014 C250, C350, C300 4Matic, E550 4Matic, 2013-2014 C63 AMG, 2012-2015 C250 Coupe, C350 Coupe, C63 AMG Coupe, 2013-2015 C350 4Matic Coupe, GLK250 4Matic BlueTec, GLK350, GLK350 4Matic, 2016-2017 C350e, C43 AMG, 2015 C400 4Matic, 2016-2018 C63 AMG, GLC300, GLC300 4Matic, 2017-2018 C300 Coupe, C300 4Matic Coupe, C43 AMG, C63 AMG Coupe, C63S AMG Coupe, C300 Cabriolet, C300 4Matic Cabriolet, C43 AMG Cabriolet, C63 AMG Cabriolet, C63S AMG Cabriolet, GLC300 4Matic Coupe, GLC43 AMG, GLC43 AMG Coupe, 2014 E350 Coupe, E350 4Matic Coupe, E350 Cabriolet, E400 Hybrid, 2015-2017 E400 Coupe, E400 4Matic Coupe, E400 Cabriolet, 2014-2017 E550 Coupe, E550 Cabriolet, B250e, 2014-2016 E250 BlueTec, E63 AMG 4Matic Wagon, 2012-2013 E350 BlueTec, 2012-2016 E350, E350 4Matic, 2015-2016 E400, E400 4Matic, 2012 E63 AMG, 2014-2015 E250 4Matic BlueTec, 2013-2016 E350 Wagon, 2017 GLC300d 4Matic, and 2018 GLC350e 4Matic. The driver's air bag may unexpectedly deploy due to insufficient grounding of the steering components if an electrostatic discharge occurs and the air bag clockspring is broken.

Consequence & remedy

Consequence: If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.

Remedy: MBUSA will notify owners, and dealers will add sufficient grounding to the steering components, free of charge. The recall began in December 6, 2017. Owners may contact MBUSA customer service at 1-877-496-3691.

17V252000 · Steering

Apr 12, 2017

Mercedes-Benz USA LLC. (MBUSA) is recalling certain 2013-2014 C250, C300 4MATIC, GLK250 4MATIC BLUETEC and GLK350 vehicles, 2013 C250 Coupe, C350, C350 4MATIC Coupe, C350 Coupe and C63 AMG Coupe vehicles, and 2013-2015 GLK350 4MATIC vehicles. The steering coupling connecting bolt may have been insufficiently tightened, possibly resulting in a loss of steering.

Consequence & remedy

Consequence: A loss of steering can increase the risk of a crash.

Remedy: MBUSA will notify owners, and dealers will inspect the steering coupling connecting bolt, tightening it as necessary, free of charge. The recall began May 2017. Owners may contact MBUSA customer service at 1-800-367-6372.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.