IllustrationOur garage housed C250 4d SDN year 2013 had its service B performed 12-5-22 and revealed rust on Chassis. Was informed that this has been seen frequently on cars of this genre. Was told deterioration could result in chassis breaking and causing an accident. A recall for this issue occurred in Europe...why not here?
2013 MERCEDES-BENZ C250
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2013 MERCEDES-BENZ C250 do not stand out strongly from the model-year median of 163.
About this comparison →How this year compares
Owner complaints by model year
Compare all C250 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
180–25K
2425–50K
3350–75K
2175–100K
12100–150K
1150K+
109 reports with mileage · 168 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 162 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 46 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Fuel/propulsion System. Review the 24 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
13 crash reports5 fire reports14 injury reports
Structure complaints
11 reportsThe interior driver side door handle broke and I was trapped inside my vehicle. Upon checking with the local Mercedes-Benz repair shop, this is a known problem with this type of vehicle and the design of the door handle is prone to this kind of a problem. As of now, the contact has stated that their current solution for the iss…
Read full complaint
The interior driver side door handle broke and I was trapped inside my vehicle. Upon checking with the local Mercedes-Benz repair shop, this is a known problem with this type of vehicle and the design of the door handle is prone to this kind of a problem. As of now, the contact has stated that their current solution for the issue is to roll down the window and open the door with the exterior handle.
DROVE UP TO DESTINATION PLACED THE CAR IN PARK AND TURNED OFF IGNITION WHEN I THEN REACHED FOR THE DOOR HANDLE AND WAS UNABLE TO OPEN THE DOOR. DRIVERS DOOR LATCH/ HANDLE BROKE AND UNABLE TO OPEN DOOR TO GET OUT OF CAR. I TOOK VEHICLE TO DEALERSHIP AND THEY STATED IT WAS NOT A RECALL AND NOT A SAFETY CONCERN AND I WOULD HAVE TO …
Read full complaint
DROVE UP TO DESTINATION PLACED THE CAR IN PARK AND TURNED OFF IGNITION WHEN I THEN REACHED FOR THE DOOR HANDLE AND WAS UNABLE TO OPEN THE DOOR. DRIVERS DOOR LATCH/ HANDLE BROKE AND UNABLE TO OPEN DOOR TO GET OUT OF CAR. I TOOK VEHICLE TO DEALERSHIP AND THEY STATED IT WAS NOT A RECALL AND NOT A SAFETY CONCERN AND I WOULD HAVE TO REPLACE THE DOOR WHICH THEY QUOTED ME $1000.00 (LABOR/DOOR). THIS IS A SAFETY CONCERN WHEN YOU CANNOT OPEN THE DOOR WITH WINDOW UP. DEALER STATED THE PART HAS 2 YEAR WARRANTY AND THERE WAS NO ASSURANCE THAT IT COULD HAPPEN AGAIN NOR IF THE OTHER DOORS LATCH/HANDLE WILL BREAK AS WELL.
THE INSIDE DRIVER'S DOOR HANDLE TO OPEN THE CAR BROKE. IT DOESN'T OPEN AND THOUGHT WAS EASY TO FIX. TOOK IT TO THE DEALER AND TOLD ME IT COST A $1,000.00 BECAUSE NEED A NEW PANEL. UNACCEPTABLE. LOOKING IN INTERNET, FIGURE OUT THAT I'M NOT THE ONLY ONE WITH THIS PROBLEM. THERE'S A LOT OF CARS IN U.S. THIS REPRESENT A SERIOUS LIF…
Read full complaint
THE INSIDE DRIVER'S DOOR HANDLE TO OPEN THE CAR BROKE. IT DOESN'T OPEN AND THOUGHT WAS EASY TO FIX. TOOK IT TO THE DEALER AND TOLD ME IT COST A $1,000.00 BECAUSE NEED A NEW PANEL. UNACCEPTABLE. LOOKING IN INTERNET, FIGURE OUT THAT I'M NOT THE ONLY ONE WITH THIS PROBLEM. THERE'S A LOT OF CARS IN U.S. THIS REPRESENT A SERIOUS LIFE THREATENING BECAUSE IN CASE OF ACCIDENT INVOLVING FIRE YOU CAN'T OPEN THE DRIVER'S DOOR FROM THE INSIDE AND HAVE TO OPEN THE ELECTRIC WINDOW TO USE THE OUTSIDE HANDLE (YES, IT OPEN FROM THE OUTSIDE!) IF THE CAR IS WITHOUT POWER IN AN ACCIDENT, YOU CAN LOOSE YOUR LIFE IF FIRE IS INVOLVE. YOU SIMPLY ARE TRAPPED AND THE ONLY OPTION IS BREAKING THE WINDOW. I WROTE TO DAIMLER, MB U.S.A. AND GARAJE ISLA VERDE (OFFICIAL DEALER IN PUERTO RICO), AND IT JUST COST $1,000.00. MB U.S.A. REFERRED THE CASE TO GARAJE ISLA VERDE BUT THEY THREAT ME LIKE...NOTHING EVER HAPPENED. OK, I TOOK THE CAR AND START SEARCHING IN INTERNET. SURPRISINGLY, MANY PEOPLE HAVE THE SAME PROBLEM! THEN I THOUGHT TO WRITE BECAUSE THIS IS NOT SIMPLY A MATTER OF MONEY, ALSO IS A MATTER OF THREATENING. THIS IS MY WIFE'S CAR. WE TOOK THE CAR THERE FOR LOOKING FOR THE COST OF FIXING THAT, PRICE OF FIXING A CRASH AT BACK BUMPER AND FOR GENERAL INSPECTIONS. WE LEFT THE CAR SEPTEMBER 11. WE CALLED AFTER 2 WEEKS. I PICKED THE CAR OCTOBER 19. THE SAFETY MATTER CONCERNS TO YOU, NOT WITH MY CAR, BUT WITH ALL THE CARS IN THE NATION. MAKE AN INVESTIGATION ABOUT THAT AND DECIDE IF IT PROCEED. MY BEST REGARDS AND THANKS. [XXX] RETIRED CUSTOMER SERVICE MANAGER I DON'T KNOW IF YOU HAVE A SIMILAR COMPLAINT. I JUST DID MY PART. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR
THE DRIVER DOOR HANDLE IS BROKEN, AND WE HAD THE PART ON ORDER SINCE 11/7/2017 YEAR, WE CAN NOT GET OUT OF THE CAR, ONLY WHEN WE ROLL DOWN THE WINDOW. IF THERE IS AN ACCIDENT THERE IS NO WAY OF ESCAPING.
ON MAY 13, 2018, MY DRIVER'S SIDE DOOR HANDLE WOULD NOT OPEN. I HAD BEEN DRIVING AND WENT TO EXIT THE VEHICLE AND COULD NOT GET OUT. I PANICKED THAT I COULD NOT EXIT. I HAD TO START THE CAR TO ROLL DOWN THE WINDOW AND TO OPEN DRIVERS DOOR FROM OUTSIDE. I TOOK IT IN FOR SERVICE REPAIR AND NOTIFIED THE PLASTIC HANDLE BROKE AWA…
Read full complaint
ON MAY 13, 2018, MY DRIVER'S SIDE DOOR HANDLE WOULD NOT OPEN. I HAD BEEN DRIVING AND WENT TO EXIT THE VEHICLE AND COULD NOT GET OUT. I PANICKED THAT I COULD NOT EXIT. I HAD TO START THE CAR TO ROLL DOWN THE WINDOW AND TO OPEN DRIVERS DOOR FROM OUTSIDE. I TOOK IT IN FOR SERVICE REPAIR AND NOTIFIED THE PLASTIC HANDLE BROKE AWAY INSIDE THE DOOR PANEL. TOLD IT WOULD BE 6-12 MONTHS OR LONGER WAIT TIME TO RECEIVE REPLACEMENT DOOR PANEL. MERCEDES BENZ DOES NOT JUST SELL A HANDLE REPLACEMENT AND HAVE TO PURCHASE THE WHOLE INTERIOR DOOR TRIM.
THE INTERIOR DOOR LATCH BROKE, KEEPING THE DRIVER FROM OPENING THE DOOR AND SAFELY EXITING THE VEHICLE. THIS IS A KNOWN DEFECT IN MANY MERCEDES BENZ VEHICLES WHERE THE INSIDE OF THE DOOR LATCH SNAPS OFF INSIDE THE DOOR. TO EXIT THE VEHICLE, THE DRIVER MUST LOWER THE WINDOW AND OPEN THE DOOR FROM THE OUTSIDE.
INSIDE DRIVERS DOOR HANDLE BROKE AT THE ATTACH POINT TO CABLE. ON INSPECTION FOUND THAT HANDLE IS MANUFACTURED IN SUCH A WAY THAT IT DOES NOT HAVE ENOUGH MATERIAL IN THE BODY OF THE JOINT TO MAINTAIN INTEGRITY FOR SUCH A HIGH USE ITEM. THIS PRESENTS A DANGER AS THE HANDLE WILL FAIL AND COULD FAIL IN A DANGEROUS SITUATION, TRAPPI…
Read full complaint
INSIDE DRIVERS DOOR HANDLE BROKE AT THE ATTACH POINT TO CABLE. ON INSPECTION FOUND THAT HANDLE IS MANUFACTURED IN SUCH A WAY THAT IT DOES NOT HAVE ENOUGH MATERIAL IN THE BODY OF THE JOINT TO MAINTAIN INTEGRITY FOR SUCH A HIGH USE ITEM. THIS PRESENTS A DANGER AS THE HANDLE WILL FAIL AND COULD FAIL IN A DANGEROUS SITUATION, TRAPPING THE DRIVER IN THE CAR.
ON 1/29/17 WE AWOKE TO THE SMELL OF SMOKE COMING FROM OUR GARAGE. UPON OPENING THE INSIDE DOOR TO OUR GARAGE, WE DISCOVERED THE ENTIRE GARAGE WAS ON FIRE. SUBSEQUENT INVESTIGATIONS RESULTED IN AN UNKNOWN CAUSE. HOWEVER THE FIRE WAS CENTERED AROUND THE LEFT REAR OF THE VEHICLE AND THE LEFT REAR DOOR WAS FOUND OPEN/AJAR? THE CAR …
Read full complaint
ON 1/29/17 WE AWOKE TO THE SMELL OF SMOKE COMING FROM OUR GARAGE. UPON OPENING THE INSIDE DOOR TO OUR GARAGE, WE DISCOVERED THE ENTIRE GARAGE WAS ON FIRE. SUBSEQUENT INVESTIGATIONS RESULTED IN AN UNKNOWN CAUSE. HOWEVER THE FIRE WAS CENTERED AROUND THE LEFT REAR OF THE VEHICLE AND THE LEFT REAR DOOR WAS FOUND OPEN/AJAR? THE CAR HAD BEEN PARKED IN THE GARAGE FOR OVER 24 HOURS PRIOR AND AS RECENTLY AS 9PM THE NIGHT BEFORE ALL WAS WELL WHEN I VISITED THE GARAGE?
THE DOOR HANDLE BREAKS FROM THE INSIDE MAKING IT WHERE YOU CAN'T EXIT THE VEHICLE WITHOUT THE VEHICLE'S ENGINE ON AND WINDOW ROLLED DOWN TO OPEN HANDLE FROM THE OUTSIDE OF THE VEHICLE. MERCEDES CONSIDERS THE DOOR HANDLE TO BE A "TRIM PIECE" AND NOT A FUNCTIONAL PIECE OF THE VEHICLE. THIS IS A VERY SERIOUS ISSUE AND SHOULD BE A R…
Read full complaint
THE DOOR HANDLE BREAKS FROM THE INSIDE MAKING IT WHERE YOU CAN'T EXIT THE VEHICLE WITHOUT THE VEHICLE'S ENGINE ON AND WINDOW ROLLED DOWN TO OPEN HANDLE FROM THE OUTSIDE OF THE VEHICLE. MERCEDES CONSIDERS THE DOOR HANDLE TO BE A "TRIM PIECE" AND NOT A FUNCTIONAL PIECE OF THE VEHICLE. THIS IS A VERY SERIOUS ISSUE AND SHOULD BE A RECALL OR AT LEAST COVERED IN THE EXTENDED WARRANTY THAT CUSTOMERS PURCHASE. IN AN EMERGENCY SITUATION I WOULD NOT BE ABLE TO EXIT MY VEHICLE IF THE ENGINE WAS TURNED OFF.
Official recalls
721V638000 · Air Bags:frontal
Aug 13, 2021
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2015-2016 E400 Coupe, 2012-2015 C250 Coupe, C350 Coupe, C63 AMG Coupe, 2011-2014 E350 Coupe, and 2012-2014 E350 Cabrio vehicles. An incorrect front passenger air bag may have been installed during a prior repair.
Consequence & remedy
Consequence: An incorrect air bag may not function properly in a crash, increasing the risk of injury.
Remedy: Dealers will replace the front passenger air bag on the affected vehicles, free of charge. Owner notification letters were mailed on September 10, 2021. Owners may contact MBUSA customer service at 1-800-367-6372.
19V787000 · Communication
Nov 1, 2019
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2013-2017 vehicles due to a software fault that may cause the date and time for the emergency call system (eCall) to differ from the actual date and time, potentially relaying an inaccurate vehicle location. For a full list of the affected models visit: https://static.nhtsa.gov/odi/rcl/2019/RMISC-19V787-4620.pdf
Consequence & remedy
Consequence: An inaccurate vehicle location may delay emergency responders, increasing the risk of injury.
Remedy: MBUSA has initiated an Over the Air (OTA) remote update. MBUSA will also notify owners, and dealers will check software for a successful OTA or update the communication module software as needed, free of charge. The recall began December 23, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2019120008.
19V010000 · Air Bags:frontal:passenger Side:inflator Module
Jan 9, 2019
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014 C250, C300 4Matic, C350, C63 AMG, E350 4Matic Coupe, E350 Cabrio, E350 Coupe, SLS AMG Cabrio, SLS AMG Coupe, 2014-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, GLK 350, GLK250 BlueTec 4Matic, GLK350 RWD, 2015-2017 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2014-2017 E550 Cabrio, and 2014-2016 E550 Coupe vehicles sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally, MBUSA is recalling certain 2012-2014 C250, E350 4Matic Coupe, SLS AMG Cabrio, 2012-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, 2011 C300, 2011-2014 C300 4Matic, C350, C63 AMG, E350 Cabrio, E350 Coupe, SLS AMG Coupe, 2015-2016 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2011-2016 E550 Cabrio, E550 Coupe, 2011-2015 GLK350 4Matic, GLK350 RWD, and 2013-2015 GLK250 BlueTec 4Matic vehicles ever registered in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." MBUSA is also recalling certain 2012-2014 C250, E350 4Matic Coupe, SLS AMG Cabrio 2012-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, 2010-2011 C300, 2010-2014 C300 4Matic, C350, C63 AMG, E350 Coupe, 2011-2014 E350 Cabrio, SLS AMG Coupe, 2015-2016 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2016-2017 E550 Cabrio, 2010-2016 E550 Coupe, 2010-2015 GLK350 4Matic, GLK350 RWD, and 2013-2015 GLK250 BlueTec 4Matic vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MO, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI and WY or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the passenger or other occupants resulting in serious injury or death.
Remedy: MBUSA will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 29, 2019. Owners may contact MBUSA customer service at 1-800-367-6372.
18V043000 · Air Bags:frontal:passenger Side:inflator Module
Jan 10, 2018
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2013 C250, C250 Coupe, C350 Coupe 4Matic, C300 4Matic, C350, C350 Coupe, C63 AMG, C63 Coupe, E350 Cabrio, E350 Coupe, E550 Cabrio, E350 Coupe 4Matic, E550 Coupe, GLK350 4Matic, GLK250 Bluetec 4Matic, GLK350, SLS Coupe, SLS AMG GT Coupe, and SLS Roadster vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, MBUSA is recalling certain 2010 C300, C300 4Matic, C63 AMG, E350 Coupe, E550 Coupe, GLK350, and GLK350 4Matic vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." MBUSA is also recalling certain 2009 C300, C300 4Matic, C63 AMG, and C350 vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MO, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI and WY or "Zone C." In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflator may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: MBUSA will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. Mercedes issued an interim notification to owners on February 23, 2018. A second notice will be mailed when remedy parts are available. Owners may contact MBUSA customer service at 1-877-496-3691.
17V627000 · Air Bags:frontal
Oct 6, 2017
Mercedes-Benz USA, LLC. (MBUSA) is recalling these vehicles: 2014-2018 CLA250, CLA250 4Matic, CLA45 AMG 4Matic, 2015-2018 GLA250, GLA250 4Matic, GLA45 AMG 4Matic, C300 4Matic, C63S AMG, 2012-2014 C250, C350, C300 4Matic, E550 4Matic, 2013-2014 C63 AMG, 2012-2015 C250 Coupe, C350 Coupe, C63 AMG Coupe, 2013-2015 C350 4Matic Coupe, GLK250 4Matic BlueTec, GLK350, GLK350 4Matic, 2016-2017 C350e, C43 AMG, 2015 C400 4Matic, 2016-2018 C63 AMG, GLC300, GLC300 4Matic, 2017-2018 C300 Coupe, C300 4Matic Coupe, C43 AMG, C63 AMG Coupe, C63S AMG Coupe, C300 Cabriolet, C300 4Matic Cabriolet, C43 AMG Cabriolet, C63 AMG Cabriolet, C63S AMG Cabriolet, GLC300 4Matic Coupe, GLC43 AMG, GLC43 AMG Coupe, 2014 E350 Coupe, E350 4Matic Coupe, E350 Cabriolet, E400 Hybrid, 2015-2017 E400 Coupe, E400 4Matic Coupe, E400 Cabriolet, 2014-2017 E550 Coupe, E550 Cabriolet, B250e, 2014-2016 E250 BlueTec, E63 AMG 4Matic Wagon, 2012-2013 E350 BlueTec, 2012-2016 E350, E350 4Matic, 2015-2016 E400, E400 4Matic, 2012 E63 AMG, 2014-2015 E250 4Matic BlueTec, 2013-2016 E350 Wagon, 2017 GLC300d 4Matic, and 2018 GLC350e 4Matic. The driver's air bag may unexpectedly deploy due to insufficient grounding of the steering components if an electrostatic discharge occurs and the air bag clockspring is broken.
Consequence & remedy
Consequence: If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.
Remedy: MBUSA will notify owners, and dealers will add sufficient grounding to the steering components, free of charge. The recall began in December 6, 2017. Owners may contact MBUSA customer service at 1-877-496-3691.
17V252000 · Steering
Apr 12, 2017
Mercedes-Benz USA LLC. (MBUSA) is recalling certain 2013-2014 C250, C300 4MATIC, GLK250 4MATIC BLUETEC and GLK350 vehicles, 2013 C250 Coupe, C350, C350 4MATIC Coupe, C350 Coupe and C63 AMG Coupe vehicles, and 2013-2015 GLK350 4MATIC vehicles. The steering coupling connecting bolt may have been insufficiently tightened, possibly resulting in a loss of steering.
Consequence & remedy
Consequence: A loss of steering can increase the risk of a crash.
Remedy: MBUSA will notify owners, and dealers will inspect the steering coupling connecting bolt, tightening it as necessary, free of charge. The recall began May 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
17V177000 · Air Bags:frontal:sensor/control MODULE-INACTIVE ; Electrical System:software
Mar 14, 2017
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 AMG GT-S, GLC300, CLA250 and GLE300d 4Matic vehicles, 2013 C250, E350 BlueTec and G63 AMG vehicles, 2008-2014 C300 vehicles, 2013-2014 C300 4Matic and ML350 4Matic vehicles, 2009 C350 vehicles, 2014 CLS550, E350 4Matic, E350 Coupe 4Matic, E350 Wagon 4Matic, GLK350 and SL550 vehicles, 2012 CLS550 4Matic vehicles, 2012-2016 E350 vehicles, 2016-2017 GL450 4Matic vehicles, 2012-2014 ML350 4Matic BlueTec vehicles, 2015 S550, S550 4Matic and C300 4Matic Sedan vehicles, 2015-2016 C300 Sedan vehicles, and 2017 SL63 AMG vehicles. Various control units on these vehicles may have been updated with incorrect software, potentially affecting the correct deployment of the air bags in the event of a crash.
Consequence & remedy
Consequence: If the air bags do not deploy as intended in the event of a crash, there would be an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will update software in the affected control units, free of charge. The recall began April 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
Additional source detail variants (2)
Electrical System:software
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 AMG GT-S, GLC300, CLA250 and GLE300d 4Matic vehicles, 2013 C250, E350 BlueTec and G63 AMG vehicles, 2008-2014 C300 vehicles, 2013-2014 C300 4Matic and ML350 4Matic vehicles, 2009 C350 vehicles, 2014 CLS550, E350 4Matic, E350 Coupe 4Matic, E350 Wagon 4Matic, GLK350 and SL550 vehicles, 2012 CLS550 4Matic vehicles, 2012-2016 E350 vehicles, 2016-2017 GL450 4Matic vehicles, 2012-2014 ML350 4Matic BlueTec vehicles, 2015 S550, S550 4Matic and C300 4Matic Sedan vehicles, 2015-2016 C300 Sedan vehicles, and 2017 SL63 AMG vehicles. Various control units on these vehicles may have been updated with incorrect software, potentially affecting the correct deployment of the air bags in the event of a crash.
Consequence: If the air bags do not deploy as intended in the event of a crash, there would be an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will update software in the affected control units, free of charge. The recall began April 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
Air Bags:frontal:sensor/control MODULE-INACTIVE
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 AMG GT-S, GLC300, CLA250 and GLE300d 4Matic vehicles, 2013 C250, E350 BlueTec and G63 AMG vehicles, 2008-2014 C300 vehicles, 2013-2014 C300 4Matic and ML350 4Matic vehicles, 2009 C350 vehicles, 2014 CLS550, E350 4Matic, E350 Coupe 4Matic, E350 Wagon 4Matic, GLK350 and SL550 vehicles, 2012 CLS550 4Matic vehicles, 2012-2016 E350 vehicles, 2016-2017 GL450 4Matic vehicles, 2012-2014 ML350 4Matic BlueTec vehicles, 2015 S550, S550 4Matic and C300 4Matic Sedan vehicles, 2015-2016 C300 Sedan vehicles, and 2017 SL63 AMG vehicles. Various control units on these vehicles may have been updated with incorrect software, potentially affecting the correct deployment of the air bags in the event of a crash.
Consequence: If the air bags do not deploy as intended in the event of a crash, there would be an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will update software in the affected control units, free of charge. The recall began April 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.