2006 MERCEDES E350 PURCHASED IN NOVEMBER 2007. CURRENT MILEAGE LESS THAN 90K. IN MARCH 2012 I ENTERED MY GARAGE AND SMELLED A HEAVY SCENT OF GASOLINE. VEHICLE TAKEN TO MERCEDES BENZ OF BUCKHEAD. ADVISED THAT THERE WAS A PROBLEM WITH FUEL LEAKING UNDER BACK PASSENGER SEAT. VEHICLE HAS NEVER BEEN INVOLVED IN AN ACCIDENT. REPAIR C…
Read full complaint
2006 MERCEDES E350 PURCHASED IN NOVEMBER 2007. CURRENT MILEAGE LESS THAN 90K. IN MARCH 2012 I ENTERED MY GARAGE AND SMELLED A HEAVY SCENT OF GASOLINE. VEHICLE TAKEN TO MERCEDES BENZ OF BUCKHEAD. ADVISED THAT THERE WAS A PROBLEM WITH FUEL LEAKING UNDER BACK PASSENGER SEAT. VEHICLE HAS NEVER BEEN INVOLVED IN AN ACCIDENT. REPAIR COST $965.63. *TR
NHTSA ODI #10567757
55,000 miles · Feb 4, 2013
Fuel/propulsion System
I'M WRITING TO LODGE A COMPLAINT CONCERNING A DANGEROUS FUEL LEAK INTO THE CABIN OF MY PARENTS' 2006 MERCEDES BENZ E 350 (VIN [XXX]), WHICH HAS RESULTED IN GAS SOAKING THE REAR INSULATION PAD, SOUND PAD, & REAR SEAT CUSHION, ALL OF WHICH ARE "SOAKED" IN GAS (PER THE REPAIR RECOMMENDATION FROM MB OF SAN DIEGO). I SHOULD ADD THAT…
Read full complaint
I'M WRITING TO LODGE A COMPLAINT CONCERNING A DANGEROUS FUEL LEAK INTO THE CABIN OF MY PARENTS' 2006 MERCEDES BENZ E 350 (VIN [XXX]), WHICH HAS RESULTED IN GAS SOAKING THE REAR INSULATION PAD, SOUND PAD, & REAR SEAT CUSHION, ALL OF WHICH ARE "SOAKED" IN GAS (PER THE REPAIR RECOMMENDATION FROM MB OF SAN DIEGO). I SHOULD ADD THAT THE CAR ONLY HAS ABOUT 55K MILES. MY MOM IS 76 AND MY DAD IS 82. THEY DON'T DRIVE MUCH-- JUST LOCAL ERRANDS. THE ONLY REASON MY MOM CAUGHT THIS ONE WAS THE STRONG GAS SMELL IN THE CABIN. I AM WRITING TO YOU DIRECTLY FOR THE FOLLOWING REASONS: 1.THIS RELATES TO YOUR ON-GOING INVESTIGATION #PE12-001. 2.THE FUEL LEAK PRESENTS A DANGEROUS RISK OF FIRE AND RISK OF GAS FUME INHALATION TO THE DRIVER AND PASSENGERS. 3.THE FUEL FROM THE LEAK DOES IN FACT SOAK INTO REAR INSULATION PAD, SOUND PAD, & REAR SEAT CUSHION, DESPITE THE INCORRECT DENIAL OF THAT FACT BY MB-USA TO THE NHTSA. (SEE LETTER FROM MB-USA TO YOU.) 4.THE SERVICE ADVISOR AT MB OF SAN DIEGO TOLD ME LAST WEEK THAT HE HAS PERSONALLY SEEN A LOT OF THESE FUEL LEAKS INTO THE CABIN WITH MBS. I HAVE ASKED THE DEALER PERFORMING THE REPAIR TO SAVE THE DEFECTIVE THE PART(S) AND THE SOAKED INSULATION PAD, SOUND PAD, & REAR SEAT CUSHION. IT IS AVAILABLE FOR YOUR INSPECTION.[XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR.. UPDATED 02-07-13 *BF *TR UPDATED 2/12/2013 *JS 02/15/2013 *JS
NHTSA ODI #10496363
50,000 miles · May 12, 2012
Fuel/propulsion System
FUEL SMELL WHEN VEHICLE IS FILLED UP ...FUEL LEAKING AT TOP OF FUEL TANK ...THIS IS A KNOW PROBLEM WITH THE W211 E CLASS CARS FROM 2003 TO 2009 DEALER WANTS 2000.00 TO REPAIR THIS FLAW IN THE FUEL SYSTEM MERCEDES WILL NOT HELP AT ALL WITH THIS KNOWN PROBLEM. *TR
MERCEDES-BENZ IS RECALLING MY 2006-2008 M-CLASS, R-CLASS, MY 2005-2009 SLK-CLASS, MY 2005-2008 C-CLASS, MY 2003-2004 AND 2006-2008 CLK-CLASS, MY 2003-2008 E-CLASS, MY 2004 AND 2008 CL-CLASS, MY 2008 CLS-CLASS, MY 2004 AND 2007-2008 S-CLASS, MY 2003 G-CLASS, AND MY 2003-2004, 2006 AND 2009 SL-CLASS VEHICLES. A SOFTWARE CALIBRATION NUMBER (SCN) CODING RECEIVED ON THE AFFECTED VEHICLES DURING A RECENT WORKSHOP VISIT WAS INCORRECT. DEPENDING ON THE MODEL YEAR AND MODEL AFFECTED, THE RESULTS OF AN INCORRECT SCN CODING CAN AFFECT A NUMBER OF VEHICLE SAFETY AND EMISSION FUNCTIONS INCLUDING THE FOLLOWING TYPES OF FUNCTIONS: (1) THE FUEL GAUGE READINGS MAY BE INCORRECT; (2) A STUCK FUEL-LEVEL SENSOR MAY NOT BE DISPLAYED IN THE INSTRUMENT CLUSTER; (3) THE OBD SYSTEM MAY CAUSE THE CHECK ENGINE LIGHT TO ILLUMINATE INCORRECTLY; AND, (4) THE SPEEDOMETER MAY BE OUT OF TOLERANCE.
Consequence & remedy
Consequence: IN THE EVENT OF A VEHICLE CRASH, THE ELECTRICAL FUEL PUMP MAY NOT RECEIVE A CRASH SIGNAL THAT IS REQUIRED FOR THE FUEL PUMP TO DISCONNECT AND PREVENT FUTURE FUEL DELIVERY AS DESIGNED.
Remedy: DEALERS WILL RECODE THE SCN FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 30, 2008. OWNERS MAY CONTACT MERCEDES-BENZ AT 1-800-367-6372.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
PE10017 · Driver Air Bag Circuit High Resistance
Opened May 14, 2010 · Closed Nov 24, 2010
Status: closed (inferred from source dates) · Air Bags; Air Bags:frontal; Electrical System; Electrical System:wiring; Electrical System:wiring:interior/under Dash
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.
Additional source detail variants (5)
Air Bags:frontal
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.
Air Bags
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.
Electrical System
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.
Electrical System:wiring:interior/under Dash
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.
Electrical System:wiring
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.
2006 Mercedes Benz E Class Problems, Complaints & Recalls | Skip That Year