2018 Mazda CX-9

While driving on an interstate service drive in Michigan, my 2018 Mazda CX9 GT suddenly lost power and began flashing overheating warnings. I tried to move my vehicle to a safe spot while the warning and sudden loss of power was happening, which took a moment due to traffic flow and my family being in the car. I moved the car off the road, and let it cool. I slowly drove the car to a parts store to get coolant. Once the cooling system was filled, I brought the car home and began researching the problem. According to internet threads like Reddit this is a wide spread problem happening among Mazda vehicles with several law firms researching class action lawsuits. My car is stuck at the dealership until I can find $12,000 to fix it, and sadly there are hundreds more just like me according to sites like [XXX] and [XXX] [XXX] [XXX] [XXX] [XXX] [XXX] And includes a Mazda Service Bulletin which indicates that there are design faults in the original cylinder head that causes the issue and that repair techs should replace failed parts with the updated and redesigned cylinder head. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Approximately three weeks ago, a message on my dashboard said to pull over immediately. Your car is overheating. I pulled over to a nearby auto shop, which indicated that I was just low on coolant. They topped off the coolant, and everything appeared fine. Two weeks later, I got the same message on the dashboard, saying my car was overheating to pull over immediately. I pulled into a nearby auto parts store and purchased coolant for the vehicle. When I checked the reservoir, it was bone dry. I added coolant and drove the car home. The following day, I checked the reservoir to see if there was still coolant, but it was all gone. I scheduled an appointment with the Mazda dealer to have the car inspected. I also checked the Mazda Forum website to see if other vehicles of my make and model had similar issues since I had never experienced this before. I found that the overheating in vehicles of my make and model was a "known issue" with Mazda. When I took it to the dealer the next day, the service agent informed me that the "known issue" was only with the Turbo model. I explained that my vehicle is a turbo model. He said that Mazda did not have to cover any costs because no recall was issued, even though it is a known issue. Mazda is now refusing to cover the repair and has indicated that the repair and replacement of the engine will cost approximately $9800. If I had been alerted earlier, I would have been able to have the car repaired.

Vehicle had bucking coming to a stop. Noticed coolant was l9w, and temp guage was fluctuating at a stop slightly. Brought it to Lester Glenn mazda in toms river NJ, service writer informed us it is the cylinder head, and that the repair is approx $11,000. Vehicle only has 85000 miles on it, and was told by dealer that there is nothing they will do. This is a known issue, with a TSB issued in 2021 due to a defect in design where the turbo charger is mounted to the cylinder head. At this point, we are requesting the manufacturer take at least part of the responsibility of the poor design they sold to the open market, that is clearly a safety hazard to my wife and 4 kids, 1 of which is an infant.

The contact owns a 2018 Mazda CX-9. The contact stated that while driving at various speeds, the engine started overheating within approximately 15 minutes of driving. The contact had to pull over and wait for a while to let the engine cool down before continuing to drive. The contact stated that there was a message that the engine was overheating and to stop driving the vehicle displayed. The vehicle was taken to the dealer where it was diagnosed that coolant was leaking into the cylinders due to a fracture in the cylinder head. The contact was unsure of the cylinders with the failure. The contact was informed that the engine needed to be replaced. The vehicle had not been repaired. The contact found a Technical Service Bulletin regarding the cylinder head failure. The manufacturer was made aware of the failure and confirmed that the VIN was not covered under the TSB and that the TSB had expired in 2023. The failure mileage was 76,000.

Engine is leaking coolant apparently due to a cracked engine block caused by a manufacturing defect in the casting. Mazda has a Technical Service Bulletin, subject:Leaks at cylinder head and the number is 01-013/21. But they refuse to help cover their mistakes and now we owners are stuck with replacing an entire engine out of pocket. Shame on Mazda

Mine Mazda 2018 CX9 had coolant leakage at 55K miles. Issue is with faulty cylinder head acknowledged by Mazda in below mentioned TSB. I open up a case with Mazda (File Number XXX). Dealer quoted 7500$ expense and Mazda is providing assistance of 3101$. I have always serviced at Mazda authorized dealership and this issue was never reported. TSB [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

My vehicle had a coolant leak st the cylinder head around the exhaust manifold. The problem was confirmed by an independent service. No warning lamps, message or other symptoms of the problem prior to the failure did not appear. The problem was detected because coolant was dropping from the powertrain to the floor. When tha catalyst was removed it was found broken due to the high temperature but the car never display a high temperature warning lamp and the temperature display remains in normal position. The car could get on fire since no warnings or signal of high temperature was registered. After the situation occurred, I found a Technical Service Bulletin (No 01-01321) from Mazda North American Operations regarding this issue but since the problem occurred after the powertrain warranty the dealer did not accept to repair it. The probability that my car could get in fire was high since no warning lamps were display.