NHTSA owner reports · September 18, 2026 snapshot.
Exterior Lighting complaints
4 reportsClear category filter72,202 miles · Dec 22, 2015
Exterior Lighting
BOTH REAR TAIL LIGHTS LOOKED CLOUDY AND THE RED COLOR OF THE REAR LIGHTS APPEARED WHITE. I REMOVED THE LIGHT BULBS, THINKING THAT MAYBE THEY HAD BURNED OUT. I NOTICED THE LIGHT BULBS HAD MELTED THROUGH THE INTERNAL RED PLASTIC LENS OF THE TAIL LIGHT ASSEMBLY AND LEFT A HOLE ABOUT THE SIZE OF A QUARTER THAT ALLOWS THE WHITE LIGHT…
Read full complaint
BOTH REAR TAIL LIGHTS LOOKED CLOUDY AND THE RED COLOR OF THE REAR LIGHTS APPEARED WHITE. I REMOVED THE LIGHT BULBS, THINKING THAT MAYBE THEY HAD BURNED OUT. I NOTICED THE LIGHT BULBS HAD MELTED THROUGH THE INTERNAL RED PLASTIC LENS OF THE TAIL LIGHT ASSEMBLY AND LEFT A HOLE ABOUT THE SIZE OF A QUARTER THAT ALLOWS THE WHITE LIGHT FROM THE BULB TO SHINE THROUGH. THE MELTED PLASTIC WAS ALL OVER THE BULBS AND THERE WAS A BURNT PLASTIC ODOR. THE 7743 BULBS WERE BOTH ORIGINAL TO THE CAR FROM MAZDA WHEN I PURCHASED THE CAR NEW IN JULY 2009. I NOTIFIED MAZDA CORPORATE AND THEY HAD ME TAKE IT TO MY DEALER. THEY INSPECTED THE LIGHTS AND SAID MAZDA WAS WILLING TO OFFER A $500 GOODWILL TO REPLACE THE TAIL LIGHT ASSEMBLY. THAT WILL NOT COVER THE COST OF $1226.77 WITHOUT LABOR TO HAVE THE DEALER REPLACE THE TAIL LIGHTS. THEY GAVE ME A CASE REF# 1-174187018. THERE SHOULD BE A RECALL FOR THIS ISSUE AND THE CONSUMER SHOULD NOT HAVE TO PAY TO GET THE LIGHTS REPLACED. THIS IS A PROBLEM WHEN THE LIGHT BULBS BURN THROUGH THE PLASTIC TAIL LIGHT ASSEMBLY. THIS IS A DESIGN FLAW.
NHTSA ODI #10811706
44,000 miles · Oct 24, 2012
Exterior LightingStructure
MAZDA CX7 2009 REAR LENS, LIGHT BULB MELTS INTERNAL RED PLASTIC, ISSUE ALL 2007 TO 2009 CX7. A SAFETY ISSUE REAR STOP LIGHT AND DRIVING LIGHT WILL NOT REFLECT THE RED COLOR. *TR
NHTSA ODI #10482143
Mileage unknown · Oct 31, 2011
Exterior Lighting
NORMAL LOW LIGHT BEAM IS CUT OFF BY THE DESIGN OF THE SURROUNDING HOOD AREA OF THE VEHICLE. THIS DESIGN FACTOR CUTS OFF THE PROJECTED BEAM AND LIMITS THE DISTANCE OF CLEAR VISIBILITY. THE PROBLEM WAS DESCRIBED DURING DEALER SERVICE AND WAS TOLD, THAT IS HOW IT WAS DESIGNED. NO ADJUSTMENT OF LIGHT IS POSSIBLE IN ORDER TO IMPROV…
Read full complaint
NORMAL LOW LIGHT BEAM IS CUT OFF BY THE DESIGN OF THE SURROUNDING HOOD AREA OF THE VEHICLE. THIS DESIGN FACTOR CUTS OFF THE PROJECTED BEAM AND LIMITS THE DISTANCE OF CLEAR VISIBILITY. THE PROBLEM WAS DESCRIBED DURING DEALER SERVICE AND WAS TOLD, THAT IS HOW IT WAS DESIGNED. NO ADJUSTMENT OF LIGHT IS POSSIBLE IN ORDER TO IMPROVE THE NIGHT LOW BEAM VISIBILITY. THE HIGH BEAM IS NOT AFFECTED & SEEMS UNOBSTRUCTED. FOR DAYLIGHT RUNNING LIGHTS IT WOULD BE ACCEPTABLE BUT FOR LIMITING NIGHT LIGHT PROJECTION BY DESIGN IS QUESTIONABLE. IS THERE A REQUIREMENT FOR LOW BEAM MINIMUM PROJECTION? IF SO, THE ISSUE NEEDS STUDIED & CORRECTED. THIS PRESENTS A SAFETY CONCERN SINCE DISTANCE VISIBLE ON LOW BEAM IS DECREASED & OBSTRUCTED. ANY EXPLANATION OR HELP IN THIS MATTER IS APPRECIATED. *TR
NHTSA ODI #10433684
7,400 miles · Feb 1, 2010
Exterior Lighting
EXCESSIVE CONDENSATION IN FRONT HEADLIGHTS. AT 3:00PM AFTERNOON CONDENSATION IS STILL PRESENT IN HEADLIGHT (85 DEGREES F). THIS HUMIDITY HAS TO GO SOMEWHERE AND THERE ARE ELECTRIC COMPONENTS IN THE BACK AND NEAR THE HEADLIGHTS WITH WARNINGS. MAZDA REFUSES TO CORRECT OR CHANGE HEADLIGHTS (MAZDA BULLETIN 09-016/09). *TR
NHTSA ODI #10303650
Official recalls
5Oct 31, 2019
Mazda North American Operations (Mazda) is recalling certain 2007-2012 CX-7, CX-9, and 2009-2012 Maza6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicles until the repair has been performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317F. Note: This recall supersedes recalls 16V356 and 17V012.
Jan 9, 2018
Mazda North American Operations (Mazda) is recalling certain 2013 Mazda6 and CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2010 Mazda6, CX-7 and CX-9 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2009 Mazda6, CX-7, and CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began March 2, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F.
Jul 18, 2017
Mazda North America Operations (Mazda) is recalling certain 2012 CX-7, CX-9 and Mazda6 vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain 2009 CX-7, CX-9 and Mazda6 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain 2007-2008 CX-7 and CX-9 sold, or ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence & remedy
Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger side air bag inflator with an alternate inflator, free of charge. The recall began October 4, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 17V-012.
Jun 29, 2017
Mazda North America Operations (Mazda) is recalling certain 2009-2011 Mazda6, and 2007-2011 CX-7 and CX-9 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence & remedy
Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator with an alternate inflator, free of charge. The recall began on August 30, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 16V356 and all vehicles that were not remedied under that campaign are now covered by this one.
Aug 11, 2016
Mazda North American Operations (Mazda) is recalling certain model year 2007-2012 Mazda CX-7 vehicles manufactured February 14, 2006, to May 9, 2012. In the affected vehicles, water may enter the front suspension ball joint fittings. If the water is contaminated with salt, such as from driving on snowy roads that have been treated, the ball joint may corrode and separate from the lower control arm, resulting in a loss of steering control.
Consequence & remedy
Consequence: A loss of steering control can increase the risk of a crash.
Remedy: Mazda will notify owners, and dealers will replace both front lower control arms, free of charge. As a priority, Mazda will first address all affected 2007-2008 vehicles as well as 2009-2011 vehicles currently registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia. West Virginia, Wisconsin, and the District of Columbia. The remaining vehicles will be addressed as parts are available. The recall began September 20, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9716H.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Illustration