The initial sensor alarm indication was low oil pressure and within less then an hour engine malfunction was detected and the vehicle stopped functioning. This incident occurred on [XXX] in SanAntonio and thereafter it was towed to the Mazda Dealership for inspection upon request. I was driving from Dallas to SanAntonio with my…
Read full complaint
The initial sensor alarm indication was low oil pressure and within less then an hour engine malfunction was detected and the vehicle stopped functioning. This incident occurred on [XXX] in SanAntonio and thereafter it was towed to the Mazda Dealership for inspection upon request. I was driving from Dallas to SanAntonio with my [XXX] and [XXX] children when the vehicle started making strange noise and It the notification on dashboard stated I need to immediately stop the vehicle for safety. Middle of nowhere I had to find a nearest safe place for my children. This vehicle put me and my kids in an unsafe environment due to the faulty engine that was installed by the Mazda company. I was afraid thinking the car will start on fire because it was an engine alert. Yes the vehicle has been inspected by the North Park Mazda dealership on 5/12/25 with an initial quote of engine repair for $7905.88. The first time I noted which was few weeks back prior to this incident when the vehicle stalled at me while I arrived and stopped the vehicle at UT Southwestern Medical Center were I work as a nurse to badge into my parking lot. I got worried for a moment thinking could it be battery issue? I turned off the vehicle and turned it back on and the vehicle starting working. I parked the car and completed a 12 hr shift and thereafter did few weeks of work without any alerts or issue on the vehicle until the day off [XXX]. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA ODI #11665901
Mileage unknown · Oct 12, 2020
Seat Belts
DRIVER'S SIDE SEAT BELT IS TOO SENSITIVE. WITHOUT EVEN STOPPING ABRUPTLY, THE SEAT BELT BECOMES LOCKED MAKING IT DIFFICULT IF TRYING TO LEAN FORWARD TO SEE IF TRAFFIC IS COMING AS SEAT BELT DOESN'T UNLOCK EASILY. I TYPICALLY HAVE TO UNCLIP THE SEAT BELT TO LET IT RETRACT THEN PUT IT BACK ON. THIS HAPPENS ALMOST DAILY. CAR DOESN'…
Read full complaint
DRIVER'S SIDE SEAT BELT IS TOO SENSITIVE. WITHOUT EVEN STOPPING ABRUPTLY, THE SEAT BELT BECOMES LOCKED MAKING IT DIFFICULT IF TRYING TO LEAN FORWARD TO SEE IF TRAFFIC IS COMING AS SEAT BELT DOESN'T UNLOCK EASILY. I TYPICALLY HAVE TO UNCLIP THE SEAT BELT TO LET IT RETRACT THEN PUT IT BACK ON. THIS HAPPENS ALMOST DAILY. CAR DOESN'T HAVE TO BE IN MOTION EITHER, I CAN BE STOPPED AND NOT ALL BUT MOST TIMES IF LEANING FORWARD THE BELT BECOMES LOCKED. I'VE HAD MANY CARS, NONE WITH THIS ISSUE. HAPPENS WHEN SLOWING DOWN OR STOPPED AND LEANING.
Mazda North American Operations (Mazda) is recalling certain 2020-2021 CX-30 vehicles. When fully opened, the power liftgate may partially lower unexpectedly when the vehicle is parked facing uphill on a slope.
Consequence & remedy
Consequence: If the power liftgate unexpectedly lowers while a person is accessing the rear storage area of the vehicle, it can increase their risk of injury.
Remedy: Mazda will notify owners, and dealers will update the power liftgate control module software and inspect the serial number of the power liftgate drive unit, replacing it if necessary, free of charge. The recall began April 8, 2021. Owners may contact Mazda customer service at 1-800-222-5500 option 4. Mazda's number for this recall is 4621B.
Mazda North American Operations (Mazda) is recalling certain 2020 CX-30 and Mazda3 vehicles. The front brake caliper mounting bolts may not have been tightened properly during assembly, possibly allowing the calipers to loosen.
Consequence & remedy
Consequence: Loose brake calipers can reduce braking performance or interfere with wheel rotation, affecting vehicle handling. Either of these scenarios can increase the risk of a crash.
Remedy: Mazda will notify owners, and dealers will inspect the front brake caliper bolts, tightening them as necessary. If bolts are missing, the affected brake caliper will be replaced. Repairs will be performed free of charge. The recall began July 24, 2020. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 4420F.
Mazda North American Operations (Mazda) is recalling certain 2020 CX-30 vehicles equipped with all-wheel drive. The evaporative vent hose for the fuel tank may be disconnected, possibly allowing fuel to leak from the charcoal canister vent at the rear of the vehicle.
Consequence & remedy
Consequence: A fuel leak in the presence of an ignition source may increase the risk of a fire. Additionally, the engine may stall while driving, increasing the risk of a crash.
Remedy: Mazda will notify owners, and dealers will inspect the evaporative vent hose in the fuel tank. If the hose is disconnected, it will be reconnected and the charcoal canister with some related parts will be replaced. Repairs will be performed free of charge. The recall began July 29, 2020. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 4520F.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2020 Mazda CX-30 Problems, Complaints & Recalls | Skip That Year
Illustration