2019 Mazda CX-3

A recall notice dated July 14, 2023 stated improper design of rearview camera wiring harness fastener. The fastener may become damaged from vibrations during normal vehicle use and/or while closing the lift gate. I have been told by the dealership that they do not have the parts to remedy the issue and don't know when they will have the parts. It appears that the manufacturer has failed or is unable to remedy this safety recall in a timely manner since more than a year has passed since the recall notice was issued and they are unable to predict when the parts will be available. Recall Status: "Recall Incomplete, remedy not yet available" Manufacturer Recall Number: 6023G. NHTSA Recall Number: 23V-487.

The contact owns a 2019 Mazda CX-3. The contact stated while driving at an undisclosed speed, the vehicle lost motive power and was unable to accelerate above 20 MPH. The low oil pressure warning light was illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the electrical wiring harness, finding that the harness appeared to suffer from normal wear and tear. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 132,000.

The contact owns a 2019 Mazda CX-3. The contact stated while driving approximately 60 MPH, while making a lane adjustment to the left, the automated lane departure system overcorrected the steering to the right. The contact stated that the failure was intermittent however, the failure had begun to occur at slower speeds. The contact stated no warning light was illuminated. The contact had taken the vehicle to a local dealer, where it was diagnosed and determined that the steering shaft needed to be replaced. The vehicle had not been repaired. The manufacturer had been informed of the failure. The failure mileage was 29,056.

The contact owns a 2019 Mazda CX3. The contact stated while turning off the vehicle, the engine did shut-off however, the interior electrical components of the vehicle such as the radio and the doors would not automatically lock intermittently. The contact took the vehicle to a local dealer who inspected the vehicle and could not duplicate the failure. The key fob battery was replaced to fix the issue however, the failure recurred with the push to start not operating as designed. The contact was concerned about a possible manufacturer network failure with the push to start function, key fob, or the vehicle. The vehicle was not repaired. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 20,000.

I PURCHASED MY 2019 CX 3 NOVEMBER 2018. APRIL 17 2019 WITH 1840 MILES I NEEDED A NEW BATTERY. I WAS TOLD I DIDN'T DRIVE THE CARE ENOUGH! I DRIVE MY CAR EVERY DAY BUT IT IS LOCAL DRIVING. FEBRUARY 25 2020 MY CAR WAS SERVICED AT 5000 MILES INCLUDING OIL CHANGE AND ENGINE CHECK. PAPERWORK SHOWED BATTERY AT 100%. MARCH 2 2020 ANOTHER NEW BATTERY WAS INSTALLED. I WAS TOLD IT WAS BECAUSE OF THE "COLD" (70 DEGREES) WEATHER! I DO NOT LEAVE A/C OR RADIO RUNNING WHEN I EXIT THE CAR. I WOULD LIKE TO KNOW IF THERE IS AN ELECTRICAL PROBLEM WITH MY CAR OR SOME OTHER UNDERLYING PROBLEM. WILL I HAVE TO REPLACE THE BATTERY ANNUALLY??? BOTH INSTANCES OCCURRED WHEN I TURNED THE CAR ON AND ALL LIGHTS FLASHED, CAR DID NOT WANT TO GO. TURNED IT OFF, RESTARTED, CHECK ENGINE LIGHT CAME ON. THANK YOU

KEY FOB DISCONNECTS WHILE DRIVING. LOCK/UNLOCK DOES NOT WORK. CAR DOES NOT START WHEN KEYFOB IS IN VEHICLE. THIS HAS HAPPENED THREE TIMES NOW, THE DEALERSHIP HAS CHANGED MY KEYFOBS, FLASHED THE MEMORY, AND REPLACED THE BATTERIES. I'VE SPOKEN TO CORPORATE CUSTOMER SERVICE AND WAS TOLD "SOMETIMES KEY FOBS JUST DISCONNECT. PLEASE EXIT THE VEHICLE, WAIT, AND TRY AGAIN." I'M CURRENTLY WAITING FOR THIS TO HAPPEN A FOURTH TIME.