← New search

2021 Mack Anthem (An)

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Anthem (an) years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 0 of 1 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Fuel/propulsion System. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports0 fire reports0 injury reports

Fuel/propulsion System complaints

1 reports
Clear category filter
Mileage unknown · Jul 24, 2023
Fuel/propulsion System

The secondary fuel filter housing broke causing the truck to shut off while driving.

NHTSA ODI #11534072

Official recalls

5

25V666000 · Seat Belts:front:anchorage

Oct 6, 2025

Mack Trucks, Inc. (Mack) is recalling certain 2020-2025 Mack MD, 2019-2025 Anthem, Granite, 2024 MD Electric, and 2025 Pinnacle trucks equipped with a passenger bench seat. The seat belt anchorage bracket may be improperly welded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 210, "Seat Belt Assembly Anchorages."

Consequence & remedy

Consequence: An improperly welded seat belt anchorage bracket can detach during a crash, increasing the risk of injury.

Remedy: Dealers will install a reinforcement plate, free of charge. Owner letters were mailed January 21, 2026. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0485. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning October 13, 2025.

24V792000 · Electrical System:software; Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module

Oct 23, 2024

Mack Trucks, Inc. (Mack) is recalling certain 2020-2025 Anthem, Granite, TerraPro and Pinnacle vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.

Consequence & remedy

Consequence: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may have diminished or lost functionality, increasing the risk of a crash.

Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed December 9, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0472.

Additional source detail variants (2)

Electrical System:software

Mack Trucks, Inc. (Mack) is recalling certain 2020-2025 Anthem, Granite, TerraPro and Pinnacle vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.

Consequence: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may have diminished or lost functionality, increasing the risk of a crash.

Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed December 9, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0472.

Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module

Mack Trucks, Inc. (Mack) is recalling certain 2020-2025 Anthem, Granite, TerraPro and Pinnacle vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.

Consequence: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may have diminished or lost functionality, increasing the risk of a crash.

Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed December 9, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0472.

22V401000 · Steering

Jun 7, 2022

Mack Trucks, Inc. (Mack) is recalling certain 2021-22 Granite, Anthem, LR, Pinnacle, and Terrapro tractor trailers. The steering gears may have been assembled incorrectly, which can cause the gear to fracture.

Consequence & remedy

Consequence: A fractured steering gear can cause a loss of steering control, increasing the risk of a crash.

Remedy: Dealers will replace the steering gear, free of charge. Owner notification letters were mailed on July 29, 2022. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0437.

21V416000 · Wheels; Wheels:hub

Jun 2, 2021

Mack Trucks, Inc. (Mack) is recalling certain 2021-2022 Anthem, Granite, and Pinnacle vehicles. The hubcap compression spring can cause the hubcap to separate.

Consequence & remedy

Consequence: A separated hubcap can create a road hazard, increasing the risk of a crash.

Remedy: Dealers will remove the hubcap, free of charge. Owner notification letters were mailed June 30, 2021. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0425.

Additional source detail variants (2)

Wheels:hub

Mack Trucks, Inc. (Mack) is recalling certain 2021-2022 Anthem, Granite, and Pinnacle vehicles. The hubcap compression spring can cause the hubcap to separate.

Consequence: A separated hubcap can create a road hazard, increasing the risk of a crash.

Remedy: Dealers will remove the hubcap, free of charge. Owner notification letters were mailed June 30, 2021. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0425.

Wheels

Mack Trucks, Inc. (Mack) is recalling certain 2021-2022 Anthem, Granite, and Pinnacle vehicles. The hubcap compression spring can cause the hubcap to separate.

Consequence: A separated hubcap can create a road hazard, increasing the risk of a crash.

Remedy: Dealers will remove the hubcap, free of charge. Owner notification letters were mailed June 30, 2021. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0425.

21V233000 · Electronic Stability Control (esc):control Module:software

Apr 1, 2021

Mack Trucks, Inc. (Mack) is recalling certain 2018-2022 Anthem (AN), Granite (GR/GU), and Pinnacle (CHU/CXU/PI) vehicles equipped with "camelback" rear suspension and electronic stability control. The vehicles may not stay in their lane at certain speeds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 136, "Electronic Stability Control Systems on Heavy Vehicles."

Consequence & remedy

Consequence: A vehicle that drifts out of its lane increases the risk of a crash.

Remedy: Mack will notify owners, and dealers will reprogram the vehicle control units, free of charge. The recall began on April 21, 2021. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0423.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

0

No exact-year investigations in this snapshot.