Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
490–25K
1525–50K
1050–75K
675–100K
7100–150K
0150K+
87 reports with mileage · 68 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
Service Brakes. Review the 39 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Engine. Review the 32 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Electrical System. Review the 27 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
6 crash reports3 fire reports3 injury reports
What owners actually said
155 reports
Mileage unknown · May 5, 2025
Service Brakes
Rear brake hose rupture. Have previously experiences rupture in front hose while driving associated with recall.Repaired April 2024. This time I was leaving a grocery store and had similar experience. Was thankfully still parked. Had car towed to dealership. Diagnosed as rear brake hose rupture. No brake light warnings, nothing…
Read full complaint
Rear brake hose rupture. Have previously experiences rupture in front hose while driving associated with recall.Repaired April 2024. This time I was leaving a grocery store and had similar experience. Was thankfully still parked. Had car towed to dealership. Diagnosed as rear brake hose rupture. No brake light warnings, nothing noted during last oil change.
NHTSA ODI #11658950
Mileage unknown · Apr 7, 2025
Service Brakes
Brake hose burst suddenly causing loss of all fluid and pressure. Hose is bent at an acute angle causing unnecessary stress on the hose.
NHTSA ODI #11653321
Mileage unknown · Feb 27, 2025
Electrical SystemLane Departure
My backup camera will become green and distorted when backing up. This is intermittent and not constant. When this happens I can’t see what is coming
NHTSA ODI #11645280
Mileage unknown · Jan 4, 2025
Power TrainSteeringSuspension
The rear differential appears to be an issue on these vehicles. 2021-2022 models/vehicles were recalled for having an issue with the rear differential. Fortunately there was not an accident with my vehicle as I was able to determine that it shouldn’t be driven. However, I’m told by the dealership that there are 155 vehicles wait…
Read full complaint
The rear differential appears to be an issue on these vehicles. 2021-2022 models/vehicles were recalled for having an issue with the rear differential. Fortunately there was not an accident with my vehicle as I was able to determine that it shouldn’t be driven. However, I’m told by the dealership that there are 155 vehicles waiting for the same repair (a rear differential replacement), and that the part to repair it is unavailable. With this information, I can’t Imagine how many vehicles are still on the road with this problem. There does not appear to be a recall on older models, nor has this issue been reviewed by the mechanics that work for the company. At the very least, this issue should be reviewed during routine maintenance.
NHTSA ODI #11634018
Mileage unknown · Aug 14, 2024
Fuel/propulsion SystemService BrakesVehicle Speed Control
A dangerous stall of the engine happens when accelerating,
NHTSA ODI #11608569
Mileage unknown · Apr 27, 2024
Engine
I have an oil consumption issue. There is a technical service Bulletin# 19-2243 indicating this is a known problem with my SUV. My Lincoln Protection Plan and Lincoln Corporate refuse to assist in replacing the engine.
NHTSA ODI #11585615
Mileage unknown · Feb 28, 2024
Wheels
Told by Diamond Ford in Lancaster CA that my Lug Nuts need to be replaced at the cost of $225.00. I have been driving for 60 years and Never had to replace Lug Nuts.
NHTSA ODI #11574530
100,000 miles · Feb 7, 2024
Service BrakesService Brakes, Hydraulic
The contact owns a 2016 Lincoln MKX. The contact stated that while driving at 45 MPH and depressing the brake pedal, the brake assist, brake, traction control, and anti-skid warning lights illuminated. The auto-braking system became inoperable. The vehicle was taken to the local dealer, who was unable to determine the cause of t…
Read full complaint
The contact owns a 2016 Lincoln MKX. The contact stated that while driving at 45 MPH and depressing the brake pedal, the brake assist, brake, traction control, and anti-skid warning lights illuminated. The auto-braking system became inoperable. The vehicle was taken to the local dealer, who was unable to determine the cause of the failure. The vehicle was not diagnosed or repaired. The vehicle was taken to an independent mechanic, who replaced the wheel hub, wheel sensor, lower control arm, and ball joint. Additionally, the mechanic informed the contact about several low voltage codes. The battery, alternator, and starter were working as designed, but there was low voltage. The manufacturer was contacted and referred the contact to the NHTSA Hotline. The failure mileage was approximately 100,000.
NHTSA ODI #11570466
Mileage unknown · Dec 14, 2023
Unknown Or Other
Six months ago I had to replace the catalytic converter on my car - per the dealership. I have just been told that the 2nd one needs replacing. My car is under 8 years old and less than 90,000 miles. The replacement cost of the 1st one was 2399.30. The 2nd one is 2464.62. Replacement is required by state and federal governments…
Read full complaint
Six months ago I had to replace the catalytic converter on my car - per the dealership. I have just been told that the 2nd one needs replacing. My car is under 8 years old and less than 90,000 miles. The replacement cost of the 1st one was 2399.30. The 2nd one is 2464.62. Replacement is required by state and federal governments and essential for protecting the environment - and yet who can afford to have them fixed? All information online indicates they should last at least 10 years, if not indefinitely. I have been driving for 50 years and never had to replace one, and now two.
NHTSA ODI #11560197
Mileage unknown · Nov 1, 2023
Wheels
My Car has swollen lug nuts . I was informed of this by a Dealer who refused to remove the nuts to rotate the tires . I expressed a concern that I had a flat would the lug wrench remove nuts . I was told probably not. I travel long distances . This possibly means I could be stranded for an extended time due to a known fact. I ha…
Read full complaint
My Car has swollen lug nuts . I was informed of this by a Dealer who refused to remove the nuts to rotate the tires . I expressed a concern that I had a flat would the lug wrench remove nuts . I was told probably not. I travel long distances . This possibly means I could be stranded for an extended time due to a known fact. I have replaced the nuts but believe I should have been notified earlier by Lincoln .
Ford Motor Company (Ford) is recalling certain 2016-2018 Lincoln MKX and 2015-2018 Edge vehicles. The rear brake jounce hose may rupture and leak brake fluid.
Consequence & remedy
Consequence: A brake fluid leak can extend the distance required to stop the vehicle, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the brake jounce hoses and adjust brake jounce hoses with no damage present, free of charge. Interim owner letters notifying owners of the safety risk were mailed September 8, 2025. Additional letters will be sent once the remedy is available, anticipated August 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S87.
Ford Motor Company (Ford) is recalling certain 2015-2018 Ford Edge and 2016-2018 Lincoln MKX vehicles. The front brake hoses may rupture prematurely.
Consequence & remedy
Consequence: A ruptured front brake hose will cause a brake fluid leak, lengthening the distance needed to stop the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will replace the front brake hoses with the new hoses that have a revised braid material, free of charge. Owner notification letters were mailed on May 13, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S42.
Additional source detail variants (2)
Service Brakes
Ford Motor Company (Ford) is recalling certain 2015-2018 Ford Edge and 2016-2018 Lincoln MKX vehicles. The front brake hoses may rupture prematurely.
Consequence: A ruptured front brake hose will cause a brake fluid leak, lengthening the distance needed to stop the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will replace the front brake hoses with the new hoses that have a revised braid material, free of charge. Owner notification letters were mailed on May 13, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S42.
Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings
Ford Motor Company (Ford) is recalling certain 2015-2018 Ford Edge and 2016-2018 Lincoln MKX vehicles. The front brake hoses may rupture prematurely.
Consequence: A ruptured front brake hose will cause a brake fluid leak, lengthening the distance needed to stop the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will replace the front brake hoses with the new hoses that have a revised braid material, free of charge. Owner notification letters were mailed on May 13, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S42.
Ford Motor Company, Inc. (Ford) is recalling certain 2016-2018 Lincoln MKX and 2019-2020 Nautilus vehicles equipped with 16-way electric tilt seats. The seat cushion frame edge may contact the wire harness when the seat occupant uses the tilt function of the seat, potentially damaging one or more wires within the harness, which can result in either inadvertent deployment of the air bag or nondeployment of the air bag in the event of a crash.
Consequence & remedy
Consequence: An air bag that deploys inadvertently increases the risk of a crash. An air bag that does not deploy in the event of a crash increases the risk of injury.
Remedy: Ford will notify owners, and dealers will install protective flocking tape onto the exposed edge of the 16-way seat cushion frames, and inspect the wire harness for damage, and repair or replace it as needed, free of charge. This recall began August 12, 2020. Owners may contact Ford/Lincoln customer service at 1-866-436-7332. Ford's number for this recall is 20S37.
Additional source detail variants (3)
Seats:front Assembly:power Adjust
Ford Motor Company, Inc. (Ford) is recalling certain 2016-2018 Lincoln MKX and 2019-2020 Nautilus vehicles equipped with 16-way electric tilt seats. The seat cushion frame edge may contact the wire harness when the seat occupant uses the tilt function of the seat, potentially damaging one or more wires within the harness, which can result in either inadvertent deployment of the air bag or nondeployment of the air bag in the event of a crash.
Consequence: An air bag that deploys inadvertently increases the risk of a crash. An air bag that does not deploy in the event of a crash increases the risk of injury.
Remedy: Ford will notify owners, and dealers will install protective flocking tape onto the exposed edge of the 16-way seat cushion frames, and inspect the wire harness for damage, and repair or replace it as needed, free of charge. This recall began August 12, 2020. Owners may contact Ford/Lincoln customer service at 1-866-436-7332. Ford's number for this recall is 20S37.
Air Bags
Ford Motor Company, Inc. (Ford) is recalling certain 2016-2018 Lincoln MKX and 2019-2020 Nautilus vehicles equipped with 16-way electric tilt seats. The seat cushion frame edge may contact the wire harness when the seat occupant uses the tilt function of the seat, potentially damaging one or more wires within the harness, which can result in either inadvertent deployment of the air bag or nondeployment of the air bag in the event of a crash.
Consequence: An air bag that deploys inadvertently increases the risk of a crash. An air bag that does not deploy in the event of a crash increases the risk of injury.
Remedy: Ford will notify owners, and dealers will install protective flocking tape onto the exposed edge of the 16-way seat cushion frames, and inspect the wire harness for damage, and repair or replace it as needed, free of charge. This recall began August 12, 2020. Owners may contact Ford/Lincoln customer service at 1-866-436-7332. Ford's number for this recall is 20S37.
Electrical System:wiring:interior/under Dash
Ford Motor Company, Inc. (Ford) is recalling certain 2016-2018 Lincoln MKX and 2019-2020 Nautilus vehicles equipped with 16-way electric tilt seats. The seat cushion frame edge may contact the wire harness when the seat occupant uses the tilt function of the seat, potentially damaging one or more wires within the harness, which can result in either inadvertent deployment of the air bag or nondeployment of the air bag in the event of a crash.
Consequence: An air bag that deploys inadvertently increases the risk of a crash. An air bag that does not deploy in the event of a crash increases the risk of injury.
Remedy: Ford will notify owners, and dealers will install protective flocking tape onto the exposed edge of the 16-way seat cushion frames, and inspect the wire harness for damage, and repair or replace it as needed, free of charge. This recall began August 12, 2020. Owners may contact Ford/Lincoln customer service at 1-866-436-7332. Ford's number for this recall is 20S37.
Ford Motor Company (Ford) is recalling certain 2016-2017 Lincoln MKX vehicles equipped with 3.7L engines. The battery positive cable harness may contact the transmission shifter cable bracket resulting in a short circuit.
Consequence & remedy
Consequence: An electrical short increases the risk of a fire.
Remedy: Ford will notify owners, and dealers will remove the battery harness clips and elbow guide, and install a wire channel shield and protective sleeve to the battery cable harness, free of charge. Interim notices informing owners of the safety risk were mailed on December 2, 2019. Owners will receive a second notice when the remedy becomes available, currently expected to be the end of April 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S41.
Ford Motor Company (Ford) is recalling certain 2013-2016 Ford Fusion and Lincoln MKZ, 2015-2016 Ford Edge, and 2016 Lincoln MKX vehicles originally sold, or currently registered in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. Road salt or other contaminants may corrode the electric power steering gear motor attachment bolts.
Consequence & remedy
Consequence: If the bolts corrode, the steering gear motor may detach from the gear housing resulting in a loss of power steering assist, requiring a greater steering effort, especially at lower speeds, and increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will replace the steering gear motor bolts and apply a wax sealer. If any of the steering gear motor attachment bolts are broken or missing, a new steering gear will be installed in the vehicle. These repairs will be performed free of charge. The recall began October 18, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S26.
Ford Motor Company (Ford) is recalling certain 2016-2017 Ford Edge and Lincoln MKX vehicles and 2017 Lincoln Continental vehicles. In the event of a crash, the driver's frontal air bag may not fully inflate or the air bag cushion may detach from the air bag module. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence & remedy
Consequence: During deployment, if the air bag does not fully inflate or the cushion detaches, there is an increased risk of injury in the event of a crash.
Remedy: Ford will notify owners, and dealers will replace the driver frontal air bag module, free of charge. The recall began June 16, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17C02.
Ford Motor Company (Ford) is recalling certain model year 2016 Lincoln MKX vehicles manufactured September 24, 2015. An incorrect seat back trim cover was installed on the affected vehicles, blocking the child seat tether anchors in the second row center seating position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 225, "Child restraint anchorage systems."
Consequence & remedy
Consequence: An improperly anchored child seat can increase the risk of injury in a crash.
Remedy: Ford will notify owners, and dealers will replace the seat back trim cover and tether cover bezel on the second row, free of charge. The recall began on June 16, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16C09.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
2016 Lincoln Mkx Problems, Complaints & Recalls | Skip That Year
Illustration