2022 Jeep Grand Cherokee

"Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken the vehicle to the dealer recently and they performed an update when the radio was blank and AM radio failed to function. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Instrument panel switches to Italian, forward collision off light gets stuck on and my seat moved abruptly while I was driving down the road. I have taken my Jeep into the dealership last year for this problem, it was “fixed” but has come back. Noticed the light stuck on last week. Today while I was driving the panel changed to Italian and my seat moved abruptly. Many people on online forums express experiencing the same problem.

While driving the vehicle, several warning lights activated, the first being automatic emergency braking is disabled. The second warning light advised me to not turn the car off until I got to my destination. It further advised that I would not be able to shift gears. The vehicle began to slow down on its own until it came to a complete stop. I was in the middle of an intersection when this happened. The dashboard was displaying a message saying press brake and push button to start car. Nothing happened when I did that. I could not shift gears or get the vehicle to move at all. Even though, I was getting the message to push the button to start the vehicle, I believe the vehicle was actually on. I was stuck near the intersection for one hour with a tow truck on the way when I was finally able to turn the e vehicle off. When it turned back on, the check engine light was on and the vehicle was able to drive. It has now happened three times.

I bought this Jeep new in 2023 and it started making this noise when it had 7000 miles on it. If was normal operational noise, why didn't it have it when it was new? Many owners on Jeep forums (JeepGarage, WLJeepForum, JeepForum, WranglerForum) report: Rattle starts light and worsens with heat soak. The company often states it is a “normal operational noise. ”Some report replacement of the entire sway bar disconnect actuator assembly under warranty resolving the noise temporarily or permanently but there is no standardized procedure. After an hour drive, the loud banging noise is huge distraction while driving. I have driven for many years and have never heard anything such as this rattle trap, especially for upward of $80,000, while fearing that it may leave the road at anytime. Any suggestions would be helpful. The worst vehicle I have ever driven and I am [XXX], INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

While driving in Hybrid mode, the Jeep threw itself into park. I was at the middle of an intersection. I put it back in drive, then it did it again once I started moving. 1. The hybrid mode threw the car into park while moving. 2. This happened to me a few times in a row, but once in the middle of a major intersection. I was lucky there were no cars that crashed into me. 3. I have brought this into Chrysler, Jeep, Doge of Paulding (Georgia) and they have reached out to the engineers at Chrysler. The service department is telling me that Chrysler is telling them there is no fix to this. I put in a ticket with Chrysler as well and they confirmed this. My ticket number is 93581933 4. the vehicle has only been inspected by the service department at the dealership. 5. I did get a hybrid engine maintenance light one time when it went into park. But not each time it did it.

Within days after completing the 95b recall (24v-720) on my Grand Cherokee 4xe PHEV , the vehicle would periodically flash an error message saying ”service hybrid system” or something to that effect. It would illuminate for just a few seconds. On May 21, I took the vehicle back to the dealership (Brigham-Gill, Natick, MA). They read several codes and after conferring with Jeep, said the vehicle is unsafe to drive. It has remained there parked in their backlot as of July 15. The dealership is awaiting guidance from Jeep and informed me they have several others in the same situation. So there were few issues here 1) if I hadn’t returned to the dealership to ask about these brief flashing messages, I would not have known that the vehicle was unsafe to drive. These messages never stayed illuminated for more than a few seconds, and there is no residual “check engine” light. 2) it is incorrect to say that the 95B recall addressed the issue of the failing batteries if it renders the vehicle in operable. 3) the 95B recall patch software was released in January 2025. I find it hard to believe that as of mid July they’ve been unable to find out why it doesn’t work in all the vehicles as intended. This leads me to question the thoroughness of the regression testing before it was released.

The red wrench light keeps coming on, Hybrid system needs repair. It looses power for a short period of time, every time has been on the freeway. It makes a hugh crunch noise(transmission) and slams into gear. It is available for inspection, currently at dealership, it has been there for last week. This problem has been persistent, its been in many times for this issue. Chrysler told me they do not have a fix. It is all over the chat forums. We do not feel safe driving this car because it looses power temporarily and on the freeway. Many others are having problems with it stopping from a loss of power. It has been inspected by the dealership and in for repairs many times. This vehicle has been in the dealership on a regular basis since it was new. It has always had a power train issue, clunky and loss of power. Now it is worse and they don't have a repair. It has also had engine lights coming on and off. Had issue with having to put it in park turn off and turn back on to get it in gear. The loss of power on the freeway is the persistent issue right now. These cars need pulled off the roads until they are fixed!

The contact owns a 2022 Jeep Grand Cherokee. The contact stated while driving at an undisclosed speed, several unknown warning lights illuminated. The contact stated that the unknown warning lights indicated powertrain failure. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact stated that the vehicle had been scheduled for an upcoming diagnostic test. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 50,089.