2022 Jeep Grand Cherokee

While driving in Hybrid mode, the Jeep threw itself into park. I was at the middle of an intersection. I put it back in drive, then it did it again once I started moving. 1. The hybrid mode threw the car into park while moving. 2. This happened to me a few times in a row, but once in the middle of a major intersection. I was lucky there were no cars that crashed into me. 3. I have brought this into Chrysler, Jeep, Doge of Paulding (Georgia) and they have reached out to the engineers at Chrysler. The service department is telling me that Chrysler is telling them there is no fix to this. I put in a ticket with Chrysler as well and they confirmed this. My ticket number is 93581933 4. the vehicle has only been inspected by the service department at the dealership. 5. I did get a hybrid engine maintenance light one time when it went into park. But not each time it did it.

Within days after completing the 95b recall (24v-720) on my Grand Cherokee 4xe PHEV , the vehicle would periodically flash an error message saying ”service hybrid system” or something to that effect. It would illuminate for just a few seconds. On May 21, I took the vehicle back to the dealership (Brigham-Gill, Natick, MA). They read several codes and after conferring with Jeep, said the vehicle is unsafe to drive. It has remained there parked in their backlot as of July 15. The dealership is awaiting guidance from Jeep and informed me they have several others in the same situation. So there were few issues here 1) if I hadn’t returned to the dealership to ask about these brief flashing messages, I would not have known that the vehicle was unsafe to drive. These messages never stayed illuminated for more than a few seconds, and there is no residual “check engine” light. 2) it is incorrect to say that the 95B recall addressed the issue of the failing batteries if it renders the vehicle in operable. 3) the 95B recall patch software was released in January 2025. I find it hard to believe that as of mid July they’ve been unable to find out why it doesn’t work in all the vehicles as intended. This leads me to question the thoroughness of the regression testing before it was released.

The red wrench light keeps coming on, Hybrid system needs repair. It looses power for a short period of time, every time has been on the freeway. It makes a hugh crunch noise(transmission) and slams into gear. It is available for inspection, currently at dealership, it has been there for last week. This problem has been persistent, its been in many times for this issue. Chrysler told me they do not have a fix. It is all over the chat forums. We do not feel safe driving this car because it looses power temporarily and on the freeway. Many others are having problems with it stopping from a loss of power. It has been inspected by the dealership and in for repairs many times. This vehicle has been in the dealership on a regular basis since it was new. It has always had a power train issue, clunky and loss of power. Now it is worse and they don't have a repair. It has also had engine lights coming on and off. Had issue with having to put it in park turn off and turn back on to get it in gear. The loss of power on the freeway is the persistent issue right now. These cars need pulled off the roads until they are fixed!

The contact owns a 2022 Jeep Grand Cherokee. The contact stated while driving at an undisclosed speed, several unknown warning lights illuminated. The contact stated that the unknown warning lights indicated powertrain failure. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact stated that the vehicle had been scheduled for an upcoming diagnostic test. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 50,089.

Vehicle suffers from a documented hybrid defect (DTC B273C-00) that causes loss of electric propulsion, disables hybrid modes, and triggers "Service Hybrid Electric Vehicle System" warnings. The problem first appeared around Feb 2025 and was confirmed by FCA’s own STAR bulletins and dealership diagnostics. No validated fix exists; dealership only cleared the fault code temporarily. The defect led to: • Power loss during highway merge on [XXX], with children in the car • Sudden unintended acceleration on [XXX] • Persistent warnings and failure to operate in advertised hybrid/electric modes for over 120+ days FCA refused to repurchase, replace, or permanently repair, despite acknowledging the defect and safety risk in internal documents. The vehicle remains in ICE-only mode, depriving it of the key safety and efficiency features it was designed to provide. The defect significantly raises risk of collision due to unpredictable propulsion response, and no dealership or FCA representative provided written certification the vehicle is safe in all drive modes. Vehicle purchased in Wisconsin but always registered and operated exclusively in Illinois. Arbitration through NCDS confirmed the defect exists but denied relief, citing insufficient corroboration. Problem was reproduced and confirmed by certified dealership and documented in service records. This complaint is part of an ongoing concern that hybrid system EMI issues (like DTC B273C-00) pose systemic safety risk and remain unresolved. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Driving vehicle and it lost all power. Warning light for Service PHEV came on solid on dash. Switched to ESave and was able to drive approx 2 blocks and vehicle lost power again in middle of road. Shifted to neutral, restarted and was able to side of road. Called tow company to deliver to dealer. Side note- vehicle was in dealer on 6/30 with flashing Service PHEV light; dealer ran code and returned with DTC of B273C-00 (Digital Crash Input). Dealer stated that vehicle is going into a “limp mode” due to 95B software update, and that there is not a fix, and other vehicles are at dealership unable to repair. When asked for advice what I should do, the response was “ do not take a long road trip”. I drove approx 60 miles since and the vehicle went into solid limp mode. Being evaluated at dealership currently.

In January work related to recall 95B was performed on the Jeep. The next day the issues started with a warning light indicating the Hybrid System needed service. The Jeep has been in repair for this issue 6 times and over 56 days with no resolution. It is currently in for repair. A buy back request was made but both FCA and the arbitrators indicate it is not a safety concern. There are safety concerns related to the Warning light as it appears to impact electrical communications in the vehicle. Repair notes indicate the communication issues. Also, power steering has stopped working and the engine has died while driving causing a rapid deceleration. Multiple users are reporting the same issues or additional impact related to the Hybrid warning light that started after 95B work.

Last week I was driving 70MPH on the highway when suddenly I got the red wrench icon with the message "Service Hybrid Electrical System" on the dashboard. After about 7 seconds I then got a "Put foot on brake and press start" message on the screen - while still going 70MPH on the highway. At that point the car died. I had no power - the accelerator pedal did nothing. Luckily, I was able to pull over to the shoulder and stop. Then I did what it said and pressed the brake + start button. The car came back to life, but I didn't have the full hybrid system - I only had gas - the car was not using any electrical power as the battery level remained constant and did not drop as I drove. I continued for another 20 minutes where I stopped for lunch. When I returned to the car it started up normally and continued to run normally after that. This is the 3rd of 4th time the red wrench icon with the Service Hybrid system warning coming up, but on the previous times the message went away after about 5 seconds and the car drove normally. This is the only time that it caused the car to completely die on my while on the highway. Apparently, this has been happening to a *lot* of people after Jeep issued a software update to address the 95b recall last year. Many owners are now afraid to drive their Jeep 4xe for fear of it suddenly dying on the highway at high speeds.

What component or system failed or malfunctioned, and is it available for inspection upon request? When driving down a busy road, the car completely stalled with loss of power steering, unable to accelerate or brake, power completely lost in car with all safety lights illuminated on the dashboard. Eventually brakes returned, able to stop car. Unable to restart and loss of power for windows. After several attempts, restarted car with warning lights still present- moved to side of Road. Currently at dealer for inspection- stated that problem was "digital crash input code failure" and that there is not a fix for this at this time. How was your safety or the safety of others put at risk? Car stalled with complete loss of control in the middle of traffic, while accelerating at approximately 15-25 mph. This could have caused an accident, but luckily did not. However, car was stalled in traffic for about 30 mins and unable to move car at all- blocking traffic on busy street. If happened on highway, could have been much worse and also had the potential to cause an accident. Has the problem been reproduced or confirmed by a dealer or independent service center? The problem was confirmed by dealer, and said that there is "no fix". According to them, all recalls have been fixed in this vehicle prior to incident and should have fixed this problem by replacing the battery. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Vehicle has been inspected by both dealership service and Chrysler/ Stellantis engineers. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? There was 1 warning light message about "EV system hybrid control" needs service, but disappeared after 30 seconds and this appeared about 1 week prior to incident.

My car was showing a "service hybrid system" warning light in the months of April and May 2025 intermittantly along with a slight loss of power. I took it to the dealership and was told its a software issue but it's fine. Stellantis is aware of this issue but there is no fix. I brought it back a week later with the same concerns and reading the document the dealership gave me - the 95B recall fix apparently crashed communication modules with my ORC. I expressed safety concerns. The dealership once again cleared codes and told me it was safe to drive. One week later on May 8, 2025, I was driving home from work. Without warning, the car locked up and went limp in the middle of the road. I went from 35mph to 0mph without seconds. I luckily was not rear ended. The dealership opened up another case with STAR. I have since gotten rid of the car due to continuous recalls and issues. I did not feel safe in this car and I feared for myself as well as others on the road. I am only taking the time to report this because there is no fix, my dealership repeadily gave the car back to me (in the notes, it was to be returned to me on 5/12 with no fix), and others are having the same issue.