2022 Jeep Grand Cherokee 4XE

I recently had a recall fix for the hybrid system battery. Days after the car was serviced my dashboard displayed messages saying to service the Hybrid system and the 4WD. Two days later I was stopped at an intersection. I put my foot on the gas and after a few feet I lost power and the car only rolled. I was able to roll onto the shoulder while the dashboard was displaying multiple errors and showed the parking break was on, along with other warnings. I turned off the car and turned it back on. I selected the E-save setting wnich allowed me to complete the drive without any further issues.

Vehicle immediately accelerated as I was attempting to pull out of the house garage. I pressed hard on the breaks to halt it. I then returned the gear knob to park (“P”) mode. I tried again to place the gear knob on drive and the vehicle started raving on high as if it was about to take off at full speed. I waited for a few minutes while it was on park “P” mode, with the engine still idling, and placed it in reverse “R” mode to return into the garage and the same thing happened in reverse mode. It jumped back in full speed when I gradually released the brakes. Engine was raving extremely high. I decided to shut it off and schedule an appointment with the dealership for a vehicle inspection. As is, not certain if it might do the same while out on the street driving it. Vehicle just had a recall inspection done on 4/20/2024. This is the first time the engine has done such.

ON [XXX], at [XXX], i was driving the vehicle in electric Save mode, where the temperature was around -19 degree on that day and i was heading for car wash, During that time, the vehicle in front of me applied a break. i was at safe distance i applied the break as the distance was close Even the anti-breaking system did not work on hitting the vehicle at that time, and then it bumped three times. I was in shock at the vehicle's behavior and lost confidence in it. So the police office impounded the vehicle. to make the road safe. None of the air bags were deployed. I am having trouble picturing what would happen if this were on the freeway. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

It is easy, when driving in automatic mode, to accidently touch one of the paddle shifters. In doing so, the automatic transmission disengages, and the transmission suddenly switches to control by the paddle shifters. If the driver is unaware of this, the vehicle can lose motive power if the gear then in effect is no longer fitting for the vehicles speed and the engine's RPM. I recently took the vehicle in for service of this issue because my wife had experienced this while driving on Interstate 95, in Maryland. The vehicle stopped responding to the accelerator, so she pulled onto the shoulder, put the vehicle in park and turned it off. When she turned it back on, it was back in automatic mode, and she was able to resume driving. The technician and service manager advised that when this occurs, the vehicle can be returned to automatic mode by pulling the right paddle forward. That information does not appear in the vehicle manual, or on the Jeep website. The technician and service manager also advised that there is no way to disable the paddles to prevent the problem from repeating, Other drivers have experienced this. See [XXX] . I believe it is a serious safety problem. To that point, there is a pending safety recall -- NHTSA 23V- 412 (copy attached) -- that addresses loss of motive power for another reason. Here is the description in the recall notice: The transmission control module and the hybrid control processor on your vehicle [1] may experience loss of communication caused by diagnostic reactions to faults resulting in an engine shut down condition. Engine shut down may result in an unexpected loss of motive power while driving, which can cause a vehicle crash without prior warning. The sudden enabling of the paddle shifter and resulting loss of motive power is also a safety issue that needs prompt attention. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

While I was driving with my family on a highway, I deployed the drive assist function that controls the speed of the car and keeps car in lane, out of a sudden the car itself deployed a sudden quick brake without any immenant risk in fron of me ( there was no car in front of my car for at least more than half a mile) this caused a very close threat from being hit by the cars behind me amd all of my family members to be scared and worried and even my wife blamed me for slamming the brakes without any reason. I have scheduled an appointment with the dealer in the coming weeks to have it looked at and fix a recent recall as well as look into another weird noise/sounds that I was complaining to the dealer about in the past but was unable to fix or replicate

The issue only occurs when holding down a +/- button to move the speed control to a high/lower set-point greater than a one mph increment. When, after being held, the button is released at the desired new speed level, it continues to increase/decrease speed until the speed control is turned off, cancelled, or the brake is actuated. (The manual for this vehicle reinforces my understanding that releasing the held button, should stop the speed change and save a new speed level.) I have tested this, and it occurs every time and never stops accelerating until I turn off the speed control function. ( i have released this control at 35 mph and it continues to accelerate to greater than 90 mph and the new speed command is not recognized.) I can handle this now, but the first time it happened I froze temporarily and believe this issue to be very dangerous if it occurs with an unaware person at a critical time.

I was turning at a intersection, there was no car in-front only on the side , as I was turning , my jeep suddenly made an emergency beeping sound and break as if I was goin to crash into a car or something. Clearly I was just turning . The break was so hard I even thought I had gotten hit in the back or I had hit something in the front ! The car behind me had to stop and act fast as well otherwise I would have really been hit by him/her. I called my dealer since I had just bought my car 2weeks ago. I have a appt to get it look at , they told me it might be my sensor being dirty or something but I feel like this is a concern jeep should take care of. Or it will really cause an accident I don’t feel safe driving my jeep at all now! Especially doing turns or just thinking it might breaking when I am driving much faster next time. I’m taking my jeep to my dealer service dept. picture below are evidence of appts , and having to get a rental because of my report.

My vehicle has a faulty front camera system that began at around 1800 miles. When driving, multiple lights will illuminate on the dash. The cruise control, blind spot monitoring, lane keep system, and emergency automatic brakes will shut off. It has been in the shop off and on since May 13,2022. Dealership has been replaced multiple parts, but is unable to get camera system to recalibrate and function properly. Car manufacturer, Jeep, has gotten involved and can not seem to figure out what is wrong either.

Shortly after purchasing the vehicle I engaged the adaptive cruise control. It worked fine until such time as I attempted to pass a large vehicle such as a semi truck. When I would get along side of the truck the brakes violently slammed on without warning. The vehicle has been taken back to the selling dealer for repair and they were not able to fix it. (see uploaded Repair Order). I then called Jeep Customer Care who then sent me to another dealer for a second opinion. This dealer attempted repairs twice, both without success. When I took it back again a dealership employee rode with me and took a video of what happens when passing a truck with the adaptive cruise engaged. This dealer now has it for the third time and so far the vehicle has been there for about 9 days with no indication of any progress. Even if they "fix" it I am not confident of the safety of the vehicle as it would be very easy to be hit in the rear end by a following vehicle should this happen again.