← New search

2018 Jeep Cherokee

Owner reports · Recalls · Investigations

More warning signs than most Cherokee years

Owner complaints for the 2018 Jeep Cherokee are substantially higher than the model-year median of 113.

About this comparison →

When problems were reported

Mileage at the reported incident

359 reports with mileage · 324 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Power Train. Review the 292 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 190 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Engine. Review the 155 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

11 crash reports5 fire reports3 injury reports

Vehicle Speed Control complaints

20 reports
Clear category filter
40,000 miles · Jun 18, 2020
Electronic Stability Control (esc)EngineVehicle Speed Control

AS DRIVING VEHICLE SHUTS DOWN LOOSE ALL CONTROL. MESSAGE POPS UP THAT SAYS. APPLY BRAKE AND PUT IN PARK OR NEUTRAL. ENGINE SHUTS DOWN. IN MOTION ON HIGHWAY. VERY DANGEROUS. *TR

NHTSA ODI #11329596

51,000 miles · Jan 31, 2020
Unknown Or OtherVehicle Speed Control

THE JEEP COMES WITH THE FEATURE OF WHEN U COME TO A STOP SIGN OR STOP FOR ANY TIME THE MOTOR SHUTS OFF AND RESUMES WHEN THE GAS PEDAL IS PRESSED. MY WIFE VEHICLE'S HAD A EXCLAMATION POINT LIGHT COME ON SO SHE TOOK IT TO THE DEALERSHIP AND THEY PUT IT ON A COMPUTER AND FOUND NOTHING WRONG. THAT'S SAME VERY NIGHT SHE WAS DRIVING A…

Read full complaint

THE JEEP COMES WITH THE FEATURE OF WHEN U COME TO A STOP SIGN OR STOP FOR ANY TIME THE MOTOR SHUTS OFF AND RESUMES WHEN THE GAS PEDAL IS PRESSED. MY WIFE VEHICLE'S HAD A EXCLAMATION POINT LIGHT COME ON SO SHE TOOK IT TO THE DEALERSHIP AND THEY PUT IT ON A COMPUTER AND FOUND NOTHING WRONG. THAT'S SAME VERY NIGHT SHE WAS DRIVING AND SUDDENLY HER MOTOR JUST SHUTS OFF AL.OST CAUSING A ACCIDENT. SHE HAD TO PULL OFF THE ROAD AND AFTER MULTIPLE TRIES OF TURNING THE KEY ON AND OFF IT FINALLY RESTARTED

NHTSA ODI #11306388

48,000 miles · Sep 24, 2019
Electrical SystemUnknown Or OtherVehicle Speed Control

SINCE ABOUT 18K MILES ON VEHICLE I HAVE BEEN REPORTING ISSUES WITH THE SHIFTING, TRANSMISSION. NOW THAT THE VEHICLE IS NOT UNDER WARRANTY THEY SUDDENLY THINK THEY KNOW WHAT WILL FIX IT. BUT I NOW HAVE TO PAY ALMOST $800 TO GET IT FIXED.

NHTSA ODI #11257668

24,000 miles · Jun 19, 2019
EngineVehicle Speed Control

THE LIGHT TURNED GREEN AT AN INTERSECTION. THE VEHICLE WAS IN DRIVE, I PRESSED THE GAS AND THE VEHICLE WOULD NOT RESPOND. WHEN IT DID RESPOND THE VEHICLE JERKED INTO GEAR AND RPM'S ROSE QUICKLY.

NHTSA ODI #11221156

25,000 miles · Nov 26, 2018
Vehicle Speed Control

SERVICE SHIFTER LIGHT CAME ON.. 2 DAYS LATER CAR TURNED OFF WHILE IN DRIVING SAYING CHANGE GEAR BUT I WAS CURRENTLY IN THE CORRECT GEAR . VERY DANGEROUS I WAS DROPPING MY SON OFF TOO SCHOOL AND CAR STOPED IN THE MIDDLE OF TRAFFIC

NHTSA ODI #11153757

17,838 miles · Oct 28, 2018
EngineSteeringVehicle Speed Control

WHILE IN MOTION WITH CRUISE CONTROL SET AT 65 MPH THE TRANSMISSION JERKED TWICE AND THE ENGINE REVVED UP AND AS IF IT WAS IN NEUTRAL, STAYED THAT WAY AS IF THE ACCELERATOR WAS STUCK. I HIT MY BRAKES BECAUSE WE WAS LOSING SPEED AND WHEN STOPPED I TRIED TO PUT IN PARK BUT IT SOUNDED AS IF GEARS WAS GRI. DING I HAD TO SHUT OFF TH…

Read full complaint

WHILE IN MOTION WITH CRUISE CONTROL SET AT 65 MPH THE TRANSMISSION JERKED TWICE AND THE ENGINE REVVED UP AND AS IF IT WAS IN NEUTRAL, STAYED THAT WAY AS IF THE ACCELERATOR WAS STUCK. I HIT MY BRAKES BECAUSE WE WAS LOSING SPEED AND WHEN STOPPED I TRIED TO PUT IN PARK BUT IT SOUNDED AS IF GEARS WAS GRI. DING I HAD TO SHUT OFF THE JEEP TO MAKE IT STOP REVVING. I WAS IN THE MIDDLE OF THE 4 LANE AND COULD ONLY SHIFT TO NEUTRAL AND ROW BACKWARDS INTO THE MEDIAN. I WAS UNABLE TO PUT BACK IN DRIVE WITH PUT GEARS GRINDING. I HAD BEEN DRIVING APPROXIMATELY 40 MINS AT A SPEED OF 60-70 WHEN THIS HAPPENED. NO WARNING LIGHTS AND NOTHING ON THE DASH AT TIME OF ISSUE.

NHTSA ODI #11143583

Mileage unknown · Jun 15, 2018
Electrical SystemEngineVehicle Speed Control

CRUISE CONTROL KEEPS COMING ON AND OFF. 2.4ML ENGINE STALLS A LOT HARD TO STOP CAR WITH CRUISE CONTROL ON AND IT'S GOES IN AND OUT ON ITS OWN

NHTSA ODI #11102009

8,000 miles · May 26, 2018
EnginePower TrainVehicle Speed Control

FIRST STARTED WITH JERKING AS YOU'RE DRIVING AT ONE TIME WE WERE AT A STOPLIGHT AS AND IT THE CAR JUST WANTED TO TAKE OFF BY ITSELF AND WE ALMOST GOT INTO A CAR ACCIDENT THE CAR IS ALWAYS LOW ON OIL I MEAN WE BOUGHT THE CAR WITH 3 MILES WITHIN WEEKS IT WOULD ACTUALLY HAD NO OIL MY HUSBAND THOUGHT OUT MAYBE THE MANUFACTURER JUST …

Read full complaint

FIRST STARTED WITH JERKING AS YOU'RE DRIVING AT ONE TIME WE WERE AT A STOPLIGHT AS AND IT THE CAR JUST WANTED TO TAKE OFF BY ITSELF AND WE ALMOST GOT INTO A CAR ACCIDENT THE CAR IS ALWAYS LOW ON OIL I MEAN WE BOUGHT THE CAR WITH 3 MILES WITHIN WEEKS IT WOULD ACTUALLY HAD NO OIL MY HUSBAND THOUGHT OUT MAYBE THE MANUFACTURER JUST DIDN'T FILL IT UP ALL THE WAY BY MISTAKE DIDN'T CHECK IT OUT SO HE WENT AND PURCHASED WILL PUT OIL IN IT TWO WEEKS LATER TOOK IT FOR AN OIL CHANGE AND WE ALREADY A QUART LOW CAR WASTE IS GAS LIKE CRAZY WE ARE CONSTANTLY FILLING UP EVERY 2 DAYS AND THEN CAR DOESN'T REALLY GO ANYWHERE BUT FROM WHAT 15 MILES A DAY ON OUR WAY TO KANSAS SO WE WERE COMING TO A CURVE AND MY HUSBAND TRY TO HIT THE BRAKES AND THE CAR DID NOT BREAK IT ACTUALLY ACCELERATED AND HE HAD TO PUT THE CAR IN NEUTRAL AS HE WAS DRIVING JUST TO SLOW IT DOWN TO AVOID GETTING INTO AN ACCIDENT I MEAN WE'VE ALWAYS HAD TROUBLE WITH THIS CAR SINCE DAY ONE I BOUGHT THE CAR IN OCTOBER AND WE'VE HAD MULTIPLE ISSUES THEN I HEAR RECALL ABOUT A HOSE FOR THE GAS LINE THAT WE'RE GOING TO HAVE TO TAKE IT IN FOR SOMETHING DEFINITELY WRONG WITH THESE CARS

NHTSA ODI #11098090

119 miles · Apr 24, 2018
Vehicle Speed Control

I GOT ON I-95 FROM THE LANTANA EXIT HEADING WEST AND I NOTICED THAT THE DASHBOARD SPEEDOMETER ACCELERATED TO 119 MILE PER HOUR BUT THE VEHICLE ITSELF WAS NOT MOVING AT THAT SPEED. I EXITED TWO EXIT'S LATER ONTO GATEWAY BLVD AND THE DASHBOARD SPEEDOMETER WAS STILL SHOWING THAT I WAS GOING AT A DANGEROUS SPEED THAN I WAS ACTUALL…

Read full complaint

I GOT ON I-95 FROM THE LANTANA EXIT HEADING WEST AND I NOTICED THAT THE DASHBOARD SPEEDOMETER ACCELERATED TO 119 MILE PER HOUR BUT THE VEHICLE ITSELF WAS NOT MOVING AT THAT SPEED. I EXITED TWO EXIT'S LATER ONTO GATEWAY BLVD AND THE DASHBOARD SPEEDOMETER WAS STILL SHOWING THAT I WAS GOING AT A DANGEROUS SPEED THAN I WAS ACTUALLY GOING. I CALLED SCHUMACHER DELRAY WHERE I NOW LEASE THE VEHICLE FROM AND I WAS GIVEN AN APPOINTMENT FOR FRIDAY 4/27/2018. I ALSO EMAILED THE MANAGER KEN CADMENS AND EXECUTIVE DIRECTOR SAL DELGRECO AND I AM STILL AWAITING A RESPONSE. I OBTAINED THIS VEHICLE APPROXIMATELY ONE MONTH AGO WHERE I GAVE BACK A 2016 JEEP PATRIOT WHICH HAD DANGEROUS WHEEL BEARING ISSUES THAT CAUSED THE TIRES TO WEAR AS THOUGH THEY WERE 10 YEARS OLD. ABOUT (3)THREE WEEKS AFTER, LEASING THIS NEW 2018 JEEP CHEROKEE ON MARCH 14, 2018, I WAS INFORMED THROUGH CREDIT KARMA THAT MY 2018 JEEP CHEROKEE MAY (NOT FOR CERTAIN) HAVE DANGEROUS SAFETY ISSUES THAT CAN CAUSE A CRASH AND FATALITY AND THAT I SHOULD GET IT CHECKED OUT. I CONTACTED THE SAME TWO ABOVE INDIVIDUALS PREVIOUSLY MENTIONED IMMEDIATELY BY EMAIL TO INQUIRE ABOUT THIS CREDIT KARMA REPORT REGARDING THE VEHICLE SAFETY. HOWEVER, TO DATE APRIL 24, 2018 THEY NOR ANYONE ELSE HAS GOTTEN BACK TO ME. FAST FORWARD TO TODAY, I AM NOW BEGINNING TO HAVE THIS SERIOUS PROBLEM OF AN EXCESSIVE SPEED READING OF THE VEHICLE SPEEDOMETER SHOWING ON THE DASHBOARD. I CAN ONLY HOPE AND PRAY THAT THE VEHICLE DOES NOT ACCELERATE IT SELF TO THE ACTUAL EXCESSIVE SPEEDS THAT IT IS SHOWING ON THE DASHBOARD.

NHTSA ODI #11089854

466 miles · Feb 14, 2018
Electrical SystemUnknown Or OtherVehicle Speed Control

GOING 65 IN THE HIGHWAY IN THE MIDDLE LANE, THE PARK ASSIST SUDDENLY KICKED IN WITHOUT WARNING AND SHIFTED THE VEHICLE INTO NEUTRAL. AFTER DRIFTING TO THE SHOULDER, THE CAR WOULD NOT ENGAGE INTO DRIVE AGAIN. THE CAR IS LESS THAN A MONTH OLD.

NHTSA ODI #11072894

Official recalls

7

25V011000 · Power Train

Apr 29, 2025

Chrysler (FCA US, LLC) is recalling certain 2017-2019 Jeep Cherokee vehicles. The power transfer unit (PTU) may become damaged and disengage the transmission and differential, resulting in a loss of drive power and/or loss of park function.

Consequence & remedy

Consequence: A loss of drive power can increase the risk of a crash. A loss of park function can cause an unintended vehicle rollaway, which can increase the risk of a crash or injury.

Remedy: Dealers will update the drivetrain control module and PTU software and replace the PTU, as necessary free of charge. Owner notification letters were mailed beginning February 19, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 01C.

18V524000 · Electrical System:wiring:front Underhood

Aug 9, 2018

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.

Consequence & remedy

Consequence: A vehicle stall can increase the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.

18V494000 · Power Train:axle Assembly:axle Shaft

Jul 26, 2018

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Cherokee all-wheel-drive vehicles. The bearing cage for the right front halfshaft assembly may not have been properly heat treated, possibly resulting in the bearing cage breaking and a potential halfshaft assembly failure.

Consequence & remedy

Consequence: If the halfshaft bearing cage breaks, the halfshaft may not be able to transmit engine power, causing a loss of drive or it can allow the vehicle to move while in the "Park" position. Either condition may increase the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will replace the front right halfshaft assemblies, free of charge. The recall began September 20, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U78.

18V332000 · Electrical System:software; Electrical System:wiring; Vehicle Speed Control:cruise Control

May 17, 2018

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Consequence & remedy

Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

Additional source detail variants (3)

Electrical System:software

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

Vehicle Speed Control:cruise Control

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

Electrical System:wiring

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

18V282000 · Fuel System, Gasoline:delivery:hoses, Lines/piping, And Fittings

May 1, 2018

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Cherokee vehicles equipped with a 2.4L engine. These vehicles may have been manufactured with a fuel tube that may leak fuel into the engine compartment.

Consequence & remedy

Consequence: A fuel leak in the presence of the ignition source can increase the risk of a fire.

Remedy: Chrysler will notify owners, and dealers will inspect the fuel tube, replacing it as necessary, free of charge. The recall began May 24, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U39.

17V670000 · Engine And Engine Cooling:engine

Oct 24, 2017

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Cherokee and Compass vehicles equipped with 2.4L engines. The engines may have a cracked oil pump housing that can result in oil pump failure.

Consequence & remedy

Consequence: If the oil pump fails, the engine will stall, increasing the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the oil pump, replacing it as necessary, free of charge. The recall began December 5, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T65.

17V543000 · Equipment:other:labels; Wheels:rim

Aug 31, 2017

Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Consequence & remedy

Consequence: The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash.

Remedy: Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.

Additional source detail variants (2)

Equipment:other:labels

Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Consequence: The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash.

Remedy: Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.

Wheels:rim

Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Consequence: The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash.

Remedy: Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.