← New search

2018 Jeep Cherokee

Owner reports · Recalls · Investigations

More warning signs than most Cherokee years

Owner complaints for the 2018 Jeep Cherokee are substantially higher than the model-year median of 113.

About this comparison →

When problems were reported

Mileage at the reported incident

359 reports with mileage · 324 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Power Train. Review the 292 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 190 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Engine. Review the 155 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

11 crash reports5 fire reports3 injury reports

Engine complaints

155 reports
Clear category filter
48,172 miles · Oct 4, 2020
Engine

I PULLED TO MY HOME AND THE SERVICE SHIFTER INDICATOR LIGHTS CAME ON. THIS IS THE SECOND TIME THAT THIS HAS HAPPENED WHEN PUTTING MY CAR IN REVERSE.

NHTSA ODI #11362639

Mileage unknown · Sep 10, 2020
EnginePower Train

TL* THE CONTACT OWNS A 2018 JEEP CHEROKEE. THE CONTACT STATED THE WHILE DRIVING 30-35 MPH, THE VEHICLE STALLED. THE VEHICLE WAS DIFFICULT TO RESTART. THE SHIFT TO PARK WARNING LIGHT WAS BLINKING. THE CONTACT ADDED OIL TO VEHICLE. THE CONTACT CALLED KEVIN'S ROYAL AUTOMOTIVE (3961-3964 WAVERLY RD, OWEGO, NY 13827, (607) 687-3412) …

Read full complaint

TL* THE CONTACT OWNS A 2018 JEEP CHEROKEE. THE CONTACT STATED THE WHILE DRIVING 30-35 MPH, THE VEHICLE STALLED. THE VEHICLE WAS DIFFICULT TO RESTART. THE SHIFT TO PARK WARNING LIGHT WAS BLINKING. THE CONTACT ADDED OIL TO VEHICLE. THE CONTACT CALLED KEVIN'S ROYAL AUTOMOTIVE (3961-3964 WAVERLY RD, OWEGO, NY 13827, (607) 687-3412) AND WAS INFORMED THAT THE VEHICLE WAS WORKING AS DESIGNED AND THAT THE SAFETY FEATURE WAS ENGAGED. THE CONTACT WAS INFORMED THE SAFETY FEATURE ENGAGED WHEN THE OIL LEVEL WAS LOW. THE VEHICLE WAS NOT DIAGNOSED NOR REPAIRED. THE MANUFACTURER WAS CONTACTED HOWEVER, NO FURTHER ASSISTANCE WAS PROVIDED. THE FAILURE MILEAGE WAS UNKNOWN.

NHTSA ODI #11354178

30,016 miles · Sep 6, 2020
Engine

FILLED UP ON GAS, WHEN STARTING THE CARE IT STATED OIL CHANGE SOON. 3 MILES DOWN THE ROAD THE CAR STARTED TO SHUTTER LIKE IT WANTED TO SHUT OFF. WITH IN 20 MILES IT DID THIS 7 TIMES ON A FREEWAY. WHEN ON THE SURFACE STREETS IF THE CAR WAS STOPPED IT WOULD SHUTTER THEN TURN OFF. IT WOULD STATE PLACE INTO PARK AND RESTART VEHICLE.…

Read full complaint

FILLED UP ON GAS, WHEN STARTING THE CARE IT STATED OIL CHANGE SOON. 3 MILES DOWN THE ROAD THE CAR STARTED TO SHUTTER LIKE IT WANTED TO SHUT OFF. WITH IN 20 MILES IT DID THIS 7 TIMES ON A FREEWAY. WHEN ON THE SURFACE STREETS IF THE CAR WAS STOPPED IT WOULD SHUTTER THEN TURN OFF. IT WOULD STATE PLACE INTO PARK AND RESTART VEHICLE. I WAS NOT OVER DUE FOR AN OIL CHANGE. I DID NOT LET EVEN THE GAS LIGHT COME ON. I HAD BEEN DRIVING THE CAR FINE TILL THE OIL CHANGE SOON LIGHT CAME ON. *TR

NHTSA ODI #11353408

30,692 miles · Aug 7, 2020
Engine

EXCESSIVE OIL LOSS IN ENGINE. LITTLE OIL ON DIPSTICK. OIL CHANGE IS NOT DUE FOR ANOTHER 4,774 MILES. VEHICLE STALLS WHEN DRIVING NO MORE THAN 1/2 MILE.

NHTSA ODI #11343863

30,692 miles · Aug 7, 2020
Electrical SystemEngine

VEHICLE STALLS AT START OF DAY AFTER DRIVING NO MORE THAN A HALF A MILE. THIS HAS HAPPENED FOR THE PAST TWO DAYS IN TRAFFIC. BATTERY LIGHT COMES ON AFTER STALLS AND DOES NOT START. LETTING IT SIT FOR AWHILE IT EVENTUALLY STARTS. BATTERY WAS FULLY TESTED AND HOLDS CHARGE. DECIDED TO PARK VEHICLE AND HAVE IT TOWED TO DEALER AS TO …

Read full complaint

VEHICLE STALLS AT START OF DAY AFTER DRIVING NO MORE THAN A HALF A MILE. THIS HAS HAPPENED FOR THE PAST TWO DAYS IN TRAFFIC. BATTERY LIGHT COMES ON AFTER STALLS AND DOES NOT START. LETTING IT SIT FOR AWHILE IT EVENTUALLY STARTS. BATTERY WAS FULLY TESTED AND HOLDS CHARGE. DECIDED TO PARK VEHICLE AND HAVE IT TOWED TO DEALER AS TO NOT RISK TRAFFIC CRASH.

NHTSA ODI #11343860

23,132 miles · Jul 27, 2020
Electronic Stability Control (esc)EngineVehicle Speed Control

WHILE DRIVING, THE VEHICLE SHUTS DOWN, I LOST ALL CONTROL. A MESSAGE POPPED UP THAT SAID 'APPLY BRAKE AND PUT IN PARK OR NEUTRAL' THE ENGINE SLOWLY LOST ALL ACCELERATION AND CAME TO A COMPLETE STOP. THE CAR BEEPS AND SAID 'LOW BATTERY' BUT ALL LIGHTS AND VOLTAGE READING WAS COMPLETELY NORMAL. I TURNED CAR OFF, RESTARTED CAR, AND…

Read full complaint

WHILE DRIVING, THE VEHICLE SHUTS DOWN, I LOST ALL CONTROL. A MESSAGE POPPED UP THAT SAID 'APPLY BRAKE AND PUT IN PARK OR NEUTRAL' THE ENGINE SLOWLY LOST ALL ACCELERATION AND CAME TO A COMPLETE STOP. THE CAR BEEPS AND SAID 'LOW BATTERY' BUT ALL LIGHTS AND VOLTAGE READING WAS COMPLETELY NORMAL. I TURNED CAR OFF, RESTARTED CAR, AND IT WAS FINE, I DRIVE IT ANOTHER 100 METERS AND IT REPEATS THIS EXACT CYCLE ALL THE WAY HOME.

NHTSA ODI #11341582

Mileage unknown · Jul 19, 2020
Engine

IN MARCH, DRIVING DOWN RED ROAD - CAR SUDDENLY STALLED AND THEN SHUT DOWN COMPLETELY. AS IT WAS SHUTTING DOWN, I WAS ABLE TO MOVE IT TO THE RIGHT LANE AS TO AVOID THE TRAFFIC. CALLED TOW TRUCK AND WHEN THEY CAME, WENT TO JUMP THE CAR AND THERE WAS NO NEED - CAR STARTED. WENT STRAIGHT TO THE DEALER AND THEY SAID IT'S AN ISSUE W…

Read full complaint

IN MARCH, DRIVING DOWN RED ROAD - CAR SUDDENLY STALLED AND THEN SHUT DOWN COMPLETELY. AS IT WAS SHUTTING DOWN, I WAS ABLE TO MOVE IT TO THE RIGHT LANE AS TO AVOID THE TRAFFIC. CALLED TOW TRUCK AND WHEN THEY CAME, WENT TO JUMP THE CAR AND THERE WAS NO NEED - CAR STARTED. WENT STRAIGHT TO THE DEALER AND THEY SAID IT'S AN ISSUE WITH THIS CAR THAT I CAN'T WAIT UNTIL THE OIL IS LOW. PANDEMIC CAME SO DIDN'T DRIVE MUCH - LAST THURSDAY, 7/18, I GOT IN THE CAR AND IT DIDN'T START AGAIN - I WAITED A WHILE AND IT HESITATED STARTING. FINALLY STARTED AND WENT TO DO GROCERIES. LEAVING THE STORE, THE SAME THING HAPPENED, THE CAR DID NOT START AT ALL, CONTINUED TO TRY AND IT FINALLY STARTED. TOOK CAR TO THE DEALER 7/17/20 - STILL 1,000 MILES TO GO BEFORE NEXT OIL CHANGE AND AGAIN, THEY SAID I HAVE TO DO THE OIL CHANGE NOW EVERY 2500 MILES. THE CAR HAS SYNTHETIC OIL - I SHOULD NOT HAVE TO CHANGE EVERY 2500 MILES AS THE OIL IS ALSO MORE EXPENSIVE. TODAY 7/18, CAR DID NOT START AGAIN, SHUT DOWN COMPLETELY. AFTER SEVERAL ATTEMPTS IT STARTED AND NOW THE CHECK ENGINE LIGHT IS ON. READ ONLINE CAR HAS ISSUES WITH THE ENGINE SHUTTING DOWN AND STALLING AND THERE IS A CLASS ACTION SUIT. I AM AFRAID TO DRIVE IT AS IT MAY STOP IN THE MIDDLE OF THE ROAD AND IT'S A SAFETY CONCERN. HEADING TO THE DEALER AGAIN TOMORROW MORNING BECAUSE NOW THE CHECK ENGINE LIGHT IS ON AND CONTINUE TO HAVE THE ISSUE OF THE CAR NOT STARTING, SHUTTING DOWN AND STALLING.

NHTSA ODI #11340279

40,000 miles · Jun 18, 2020
Electronic Stability Control (esc)EngineVehicle Speed Control

AS DRIVING VEHICLE SHUTS DOWN LOOSE ALL CONTROL. MESSAGE POPS UP THAT SAYS. APPLY BRAKE AND PUT IN PARK OR NEUTRAL. ENGINE SHUTS DOWN. IN MOTION ON HIGHWAY. VERY DANGEROUS. *TR

NHTSA ODI #11329596

24,000 miles · Jun 16, 2020
Engine

TL* THE CONTACT OWNS A 2018 JEEP CHEROKEE. THE CONTACT STATED THAT WHILE DRIVING 45-50 MPH, THE VEHICLE STALLED WITHOUT WARNING. AN AUDIBLE CHIME WAS HEARD PRIOR TO THE FAILURE. THE CONTACT COASTED TO THE SIDE OF THE ROADWAY AND RESTARTED THE VEHICLE. ZIMMER CHRYSLER DODGE JEEP RAM (1086 BURLINGTON PIKE, FLORENCE, KY 41042), WAS…

Read full complaint

TL* THE CONTACT OWNS A 2018 JEEP CHEROKEE. THE CONTACT STATED THAT WHILE DRIVING 45-50 MPH, THE VEHICLE STALLED WITHOUT WARNING. AN AUDIBLE CHIME WAS HEARD PRIOR TO THE FAILURE. THE CONTACT COASTED TO THE SIDE OF THE ROADWAY AND RESTARTED THE VEHICLE. ZIMMER CHRYSLER DODGE JEEP RAM (1086 BURLINGTON PIKE, FLORENCE, KY 41042), WAS CONTACTED AND INFORMED OF THE FAILURE. THE CONTACT WAS INFORMED BY THE DEALER THAT THE VEHICLE NEEDED AN OIL CHANGE. THE VEHICLE WAS TAKEN TO AN UNKNOWN DEALER AND IT WAS CONFIRMED THAT THE VEHICLE NEEDED AN OIL CHANGE. THE CONTACT STATED THAT THE VEHICLE RECEIVED FOUR OIL CHANGES WITHIN 24 MILES. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE AND A CASE WAS FILED. THE FAILURE MILEAGE WAS APPROXIMATELY 24,000.

NHTSA ODI #11329127

39,000 miles · Jun 13, 2020
Electrical SystemElectronic Stability Control (esc)Engine

THE MESSAGE SERVICE SHIFTER APPEARS, AND ALL OF THE GEARS ON THE GEAR SHIFT LIGHT UP. THERE IS NO SPECIFIC REASON THIS HAPPENS. IT HAS HAPPENED MULTIPLE TIMES, SOMETIMES WHILE IN MOTION AND BRAKING, SOMETIMES WHILE THE CAR IS PARKED. IT STARTED WHEN MY CAR WAS NO LONGER UNDER THE 32,000 MILE WARRANTY AT THE DEALERSHIP. THIS SEEM…

Read full complaint

THE MESSAGE SERVICE SHIFTER APPEARS, AND ALL OF THE GEARS ON THE GEAR SHIFT LIGHT UP. THERE IS NO SPECIFIC REASON THIS HAPPENS. IT HAS HAPPENED MULTIPLE TIMES, SOMETIMES WHILE IN MOTION AND BRAKING, SOMETIMES WHILE THE CAR IS PARKED. IT STARTED WHEN MY CAR WAS NO LONGER UNDER THE 32,000 MILE WARRANTY AT THE DEALERSHIP. THIS SEEMS TO BE A POPULAR ISSUE AFTER I RESEARCHED IT. *TR

NHTSA ODI #11328716

Official recalls

7

25V011000 · Power Train

Apr 29, 2025

Chrysler (FCA US, LLC) is recalling certain 2017-2019 Jeep Cherokee vehicles. The power transfer unit (PTU) may become damaged and disengage the transmission and differential, resulting in a loss of drive power and/or loss of park function.

Consequence & remedy

Consequence: A loss of drive power can increase the risk of a crash. A loss of park function can cause an unintended vehicle rollaway, which can increase the risk of a crash or injury.

Remedy: Dealers will update the drivetrain control module and PTU software and replace the PTU, as necessary free of charge. Owner notification letters were mailed beginning February 19, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 01C.

18V524000 · Electrical System:wiring:front Underhood

Aug 9, 2018

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.

Consequence & remedy

Consequence: A vehicle stall can increase the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.

18V494000 · Power Train:axle Assembly:axle Shaft

Jul 26, 2018

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Cherokee all-wheel-drive vehicles. The bearing cage for the right front halfshaft assembly may not have been properly heat treated, possibly resulting in the bearing cage breaking and a potential halfshaft assembly failure.

Consequence & remedy

Consequence: If the halfshaft bearing cage breaks, the halfshaft may not be able to transmit engine power, causing a loss of drive or it can allow the vehicle to move while in the "Park" position. Either condition may increase the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will replace the front right halfshaft assemblies, free of charge. The recall began September 20, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U78.

18V332000 · Electrical System:software; Electrical System:wiring; Vehicle Speed Control:cruise Control

May 17, 2018

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Consequence & remedy

Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

Additional source detail variants (3)

Electrical System:software

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

Vehicle Speed Control:cruise Control

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

Electrical System:wiring

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

18V282000 · Fuel System, Gasoline:delivery:hoses, Lines/piping, And Fittings

May 1, 2018

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Cherokee vehicles equipped with a 2.4L engine. These vehicles may have been manufactured with a fuel tube that may leak fuel into the engine compartment.

Consequence & remedy

Consequence: A fuel leak in the presence of the ignition source can increase the risk of a fire.

Remedy: Chrysler will notify owners, and dealers will inspect the fuel tube, replacing it as necessary, free of charge. The recall began May 24, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U39.

17V670000 · Engine And Engine Cooling:engine

Oct 24, 2017

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Cherokee and Compass vehicles equipped with 2.4L engines. The engines may have a cracked oil pump housing that can result in oil pump failure.

Consequence & remedy

Consequence: If the oil pump fails, the engine will stall, increasing the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the oil pump, replacing it as necessary, free of charge. The recall began December 5, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T65.

17V543000 · Equipment:other:labels; Wheels:rim

Aug 31, 2017

Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Consequence & remedy

Consequence: The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash.

Remedy: Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.

Additional source detail variants (2)

Equipment:other:labels

Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Consequence: The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash.

Remedy: Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.

Wheels:rim

Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Consequence: The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash.

Remedy: Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.