NHTSA owner reports · September 18, 2026 snapshot.
Engine complaints
258 reportsClear category filter28,000 miles · Apr 26, 2019
Engine
BEGINNING IN DEC 17 JUST A FEW WEEKS AFTER PURCHASE IT STARTED SHUTTING OFF WHILE DRIVING. IT STARTED ONLY ON RIGHT TURNS THEN ESCALATED TO PRETTY MUCH ANYTIME. ALMOST A YEAR LATER THEY WERE ABLE TO SUPPOSEDLY REPLICATE PROBLEM AND REPLACED THE ENGINE IN DEC18. JUST A COUPLE WEEKS AFTER ENGINE REPLACED VEHICLE BEGAN DOING THE SA…
Read full complaint
BEGINNING IN DEC 17 JUST A FEW WEEKS AFTER PURCHASE IT STARTED SHUTTING OFF WHILE DRIVING. IT STARTED ONLY ON RIGHT TURNS THEN ESCALATED TO PRETTY MUCH ANYTIME. ALMOST A YEAR LATER THEY WERE ABLE TO SUPPOSEDLY REPLICATE PROBLEM AND REPLACED THE ENGINE IN DEC18. JUST A COUPLE WEEKS AFTER ENGINE REPLACED VEHICLE BEGAN DOING THE SAME THING AND I HAVE REPEATEDLY TAKEN IT BACK AND THEY CAN NEVER REPLICATE PROBLEM. THIS CAN HAPPEN IN 2 MILES - 500 MILES OR NOT AGAIN UNTIL 1200 MILES. IT IS UNPREDICTABLE AND I HAVE SOMEHOW AVOIDED SEVERAL BAD ACCIDENTS DUE TO THIS. I CANNOT TAKE ANYONE IN MY VEHICLE FOR FEAR OF LIABILITY AND SOMETHING BAD WILL HAPPEN DUE TO THIS PROBLEM. I GET NO HELP FROM CORPORATE OR THE DEALER EXCEPT ' SORRY WE CAN'T REPLICATE IT' VEHICLE HAS BEEN TOWED IN ON APRIL 19 AND AS OF TODAY THEY CANNOT FIND THE PROBLEM SO I DO NOT KNOW WHAT TO DO BUT THIS IS RIDICULOUS ALREADY.
NHTSA ODI #11203881
38,000 miles · Apr 10, 2019
Engine
WHEN MAKING A LEFT HAND TURN, VEHICLE STALLED OUT COMPLETELY, JUST SHUT OFF, UPON TAKING TO THE DEALERSHIP, THEY BEGAN AN OIL CONSUMPTION TEST AND FOUND IT TO BE USING OIL, HAVING TO ADD 1 QUART EVERY 1,000 MILES, AFTER READING FORUMS, CHRYSLER HAS HAD A PROBLEM WITH THIS FOR A FEW YEARS ON THEIR 2.4 ENGINES, AND IT IS NOT DOING…
Read full complaint
WHEN MAKING A LEFT HAND TURN, VEHICLE STALLED OUT COMPLETELY, JUST SHUT OFF, UPON TAKING TO THE DEALERSHIP, THEY BEGAN AN OIL CONSUMPTION TEST AND FOUND IT TO BE USING OIL, HAVING TO ADD 1 QUART EVERY 1,000 MILES, AFTER READING FORUMS, CHRYSLER HAS HAD A PROBLEM WITH THIS FOR A FEW YEARS ON THEIR 2.4 ENGINES, AND IT IS NOT DOING ANYTHING ABOUT IT. THEY TOLD ME THE ENGINE SHUTTING OFF WAS A FEATURE WHEN THE OIL GETS LOW, SO IT DOESN'T CAUSE FURTHER ENGINE DAMAGE. IF I WOULD HAVE BEEN ON A BUSY ROAD WITH TRAFFIC, THIS COULD HAVE BEEN SERIOUS. THE LINK SHOWS YOU ONE OF THE MANY FORUMS I HAVE FOUND REGARDING THIS ISSUE. I AM VERY FAITHFUL ON OIL CHANGES, SO THIS WAS NOT DUE TO ANY TYPE OF NEGLIGENCE ON MY PART REGARDING THE OIL. HTTP://WWW.CARPROBLEMZOO.COM/JEEP/CHEROKEE/2016/POWER-TRAIN-PROBLEMS.PHP
NHTSA ODI #11195382
36,562 miles · Mar 27, 2019
Engine
JEEP STALLS COMPLETELY WITHIN A FEW BLOCKS OF START UP DURING A TURN. I HAVE TO PUT THE CAR IN PARK AND RESTART IT. RESTART IS LABORED, AND ON AT LEAST 2 OCCASIONS, I HAD TO TRY MORE THAN ONCE TO RESTART THE CAR. MILEAGE IS UNDER 37,000. THE SERVICE DEPARTMENT AT THE DEALERSHIP RECOGNIZED THE PROBLEM WHEN I CALLED THEM, AND HAS …
Read full complaint
JEEP STALLS COMPLETELY WITHIN A FEW BLOCKS OF START UP DURING A TURN. I HAVE TO PUT THE CAR IN PARK AND RESTART IT. RESTART IS LABORED, AND ON AT LEAST 2 OCCASIONS, I HAD TO TRY MORE THAN ONCE TO RESTART THE CAR. MILEAGE IS UNDER 37,000. THE SERVICE DEPARTMENT AT THE DEALERSHIP RECOGNIZED THE PROBLEM WHEN I CALLED THEM, AND HAS PERFORMED AN EARLY OIL CHANGE. THAT SEEMS TO HAVE FIXED THE PROBLEM,AT LEAST TEMPORARILY. THEY INSTRUCTED ME TO RETURN THE CAR TO THEM IN 2000 MILES FOR THEM TO CHECK THE OIL.
NHTSA ODI #11192037
47,000 miles · Mar 21, 2019
Engine
ENGINE LIGHT IS ON DUE TO DEFECTIVE THERMOSTAT. IT'S NOT RIGHT MAKING SOMEONE PAY FOR A DEFECTIVE PART ON A 2YR OLD VEHICLE DUE TO POOR QUALITY! IF AMERICAN CARS ARE SO GOOD THEN WE SHOULDN'T HAVE ISSUES LIKE THIS.
NHTSA ODI #11190456
47,000 miles · Mar 21, 2019
EngineVehicle Speed Control
1ST, MY ENGINE LIGHT IS ON DUE TO A FAULTY THERMOSTAT IN THE ENGINE. I'M DISPLEASED A 2 YEAR OLD CAR HAS SUCH AN ISSUE. I'VE BEEN TOLD IT'S A COMMON PROBLEM OR DEFECT. 2ND MY CRUISE CONTROL GOES ROGUE AT TIMES AND SPEEDS UP EXCESSIVELY IF NO INTERVENTION HAPPENS TO STOP IT.
NHTSA ODI #11190423
29,000 miles · Mar 20, 2019
Engine
THE VEHICLE WILL STALL/DIE WHILE DRIVING. THERE IS NO POWER STEERING OR BRAKING. THIS HAS HAPPENED MULTIPLE TIMES INCLUDING WHILE DRIVING ON THE FREEWAY AT 60 MPH. I WAS TOLD BE THE DEALERSHIP THAT THIS IS A FAIL SAFE THAT IS IN PLACE TO PROTECT THE CAR FROM LOW OIL. AFTER THE FIRST INCIDENT, I KEPT CAREFUL WATCH ON MY MILEAGE A…
Read full complaint
THE VEHICLE WILL STALL/DIE WHILE DRIVING. THERE IS NO POWER STEERING OR BRAKING. THIS HAS HAPPENED MULTIPLE TIMES INCLUDING WHILE DRIVING ON THE FREEWAY AT 60 MPH. I WAS TOLD BE THE DEALERSHIP THAT THIS IS A FAIL SAFE THAT IS IN PLACE TO PROTECT THE CAR FROM LOW OIL. AFTER THE FIRST INCIDENT, I KEPT CAREFUL WATCH ON MY MILEAGE AND OIL STATUS BUT DID NOT PHYSICALLY CHECK MY OIL. NOW WITH 600 MILES TO GO BEFORE THE NEXT SUGGESTED OIL CHANGE, THE CAR HAD STALLED THREE TIMES IN A WEEK. IT IS INCREDIBLY DANGEROUS BECAUSE IT CAN HAPPEN AT ANY TIME. THE CAR WILL NOT START AGAIN RIGHT AWAY. I'VE JUST DROPPED IT AT THE DEALER AND THEY SAID THIS IS COMMON WITH THIS ENGINE AND THAT I MAY NEED TO PHYSICALLY CHECK MY OIL EVERY 1000 MILES TO ENSURE IT IS NOT LOW. THIS IS UNACCEPTABLE. THIS FAIL SAFE PUT ME AT RISK ON A HIGHWAY AND ON A HIGHWAY ENTRANCE RAMP. I ALSO SHOULD NOT HAVE TO PHYSICALLY CHECK MY OIL ON A NEW CAR AND PAY TO GET OIL CHANGES MORE FREQUENTLY THAN SUGGESTED. THE CAR HAS STALLED ON A NEIGHBORHOOD SURFACE STREET TWICE, ON A HIGHWAY ENTRANCE RAMP ONCE AND ON THE HIGHWAY AT FULL SPEED. I HAVE ALWAYS BEEN DRIVING STRAIGHT. A MESSAGE COMES ON THAT SAYS, "SHIFT TO PARK OR NEUTRAL, PRESS BRAKE TO SELECT GEAR". I HAVE SEEN MANY SIMILAR COMPLAINTS ON THE INTERNET.
NHTSA ODI #11190249
59,000 miles · Mar 20, 2019
EngineFire
TL* THE CONTACT OWNS A 2017 JEEP CHEROKEE. WHILE DRIVING APPROXIMATELY 50 MPH, THERE WAS A POPPING SOUND UNDER THE HOOD. THE CONTACT PULLED OFF OF THE ROADWAY AND, WITHOUT WARNING, THE VEHICLE CAUGHT FIRE. THE FIRE DEPARTMENT WAS CALLED AND WAS ABLE TO EXTINGUISH THE FIRE. A FIRE REPORT WAS FILED. THERE WERE NO INJURIES. THE VEH…
Read full complaint
TL* THE CONTACT OWNS A 2017 JEEP CHEROKEE. WHILE DRIVING APPROXIMATELY 50 MPH, THERE WAS A POPPING SOUND UNDER THE HOOD. THE CONTACT PULLED OFF OF THE ROADWAY AND, WITHOUT WARNING, THE VEHICLE CAUGHT FIRE. THE FIRE DEPARTMENT WAS CALLED AND WAS ABLE TO EXTINGUISH THE FIRE. A FIRE REPORT WAS FILED. THERE WERE NO INJURIES. THE VEHICLE WAS TOWED TO THE CONTACT'S RESIDENCE. THE CONTACT STATED THAT THE ENGINE COMPARTMENT WAS DESTROYED. THE VEHICLE WAS NOT YET DEEMED A TOTAL LOSS. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE DEALER AND MANUFACTURER WERE NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 59,000.
NHTSA ODI #11190200
23,000 miles · Mar 19, 2019
Engine
TL* THE CONTACT OWNS A 2017 JEEP CHEROKEE. THE CONTACT STATED THAT THE VEHICLE STALLED MORE THAN ONCE. THE FAILURE OCCURRED INTERMITTENTLY AND VARIOUS WARNING INDICATORS ILLUMINATED ON THE INSTRUMENT PANEL. KEENE CHRYSLER DODGE JEEP RAM (410 WINCHESTER ST, KEENE, NH 03431, (603) 357-0808) WAS MADE AWARE OF THE FAILURE AND INDICA…
Read full complaint
TL* THE CONTACT OWNS A 2017 JEEP CHEROKEE. THE CONTACT STATED THAT THE VEHICLE STALLED MORE THAN ONCE. THE FAILURE OCCURRED INTERMITTENTLY AND VARIOUS WARNING INDICATORS ILLUMINATED ON THE INSTRUMENT PANEL. KEENE CHRYSLER DODGE JEEP RAM (410 WINCHESTER ST, KEENE, NH 03431, (603) 357-0808) WAS MADE AWARE OF THE FAILURE AND INDICATED THAT AN OIL CONSUMPTION TEST MAY BE NEEDED. THE DEALER DID NOT TEST DRIVE THE VEHICLE. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED. THE APPROXIMATE FAILURE MILEAGE WAS 23,000.
NHTSA ODI #11189983
Mileage unknown · Mar 16, 2019
Engine
ENGINE IS CONSUMING OIL AT AN ALARMING RATE. WE HAVE PUT OVER 4QTS SINCE THE LAST OIL CHANGE IN NOV 2018. THERE IS NO LEAK, NO BURNING OF OIL, NO WARNING LIGHTS THAT TURN ON, NOR ANY AREA IN THE MOTOR WHERE YOU CAN SEE ANY OIL ACCUMULATING. WE EVEN CHANGED TO SYNTHETIC OIL AND IT'S STILL CONSUMING OIL.
NHTSA ODI #11187249
11,870 miles · Mar 15, 2019
EngineUnknown Or Other
3/15/2019 AT 12:15 I WAS DRIVING BACK TO WORK AFTER LUNCH AND MY CENTER DISPLAY PANEL SUDDENLY CHANGE FROM DISPLAYING MPH TO A MESSAGE THAT READ "SERVICE SHIFTER". WHEN I LOOKED AT MY GEAR SHIFT ALL LIGHTS WERE LIT INSTEAD OF JUST D. I IMMEDIATELY RETURNED HOME (I WAS A MILE AWAY) AND PUT THE CAR INTO PARK. THE MESSAGE REMAIN…
Read full complaint
3/15/2019 AT 12:15 I WAS DRIVING BACK TO WORK AFTER LUNCH AND MY CENTER DISPLAY PANEL SUDDENLY CHANGE FROM DISPLAYING MPH TO A MESSAGE THAT READ "SERVICE SHIFTER". WHEN I LOOKED AT MY GEAR SHIFT ALL LIGHTS WERE LIT INSTEAD OF JUST D. I IMMEDIATELY RETURNED HOME (I WAS A MILE AWAY) AND PUT THE CAR INTO PARK. THE MESSAGE REMAINED ON MY CENTER CONSOLE AND LIGHTS REMAINED LIT. I TURNED OFF/ON THE VEHICLE WITH SAME RESULTS. I PUT VEHICLE INTO GARAGE AND CALLED ROTHROCK MOTORS TO SCHEDULE AN APPOINTMENT. WILL DROP VEHICLE OF 3/16/19 BUT NO ETA ON RETURN SINCE THEY CANNOT TELL ME WHAT THE ISSUE IS UNTIL THEY LOOK AT IT. HOWEVER, I'VE FOUND HUNDREDS OF COMPLAINTS IN THE PAST 2 YEARS AFTER A VERY QUICK GOOGLE SEARCH WITH SAME ISSUE FOR JEEPS, NOT JUST MY MODEL.
NHTSA ODI #11187158
Official recalls
6Apr 29, 2025
Chrysler (FCA US, LLC) is recalling certain 2017-2019 Jeep Cherokee vehicles. The power transfer unit (PTU) may become damaged and disengage the transmission and differential, resulting in a loss of drive power and/or loss of park function.
Consequence & remedy
Consequence: A loss of drive power can increase the risk of a crash. A loss of park function can cause an unintended vehicle rollaway, which can increase the risk of a crash or injury.
Remedy: Dealers will update the drivetrain control module and PTU software and replace the PTU, as necessary free of charge. Owner notification letters were mailed beginning February 19, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 01C.
Apr 27, 2023
Chrysler (FCA US, LLC) is recalling certain 2016-2017 Jeep Cherokee vehicles. The power transfer unit (PTU) may become damaged and disengage the transmission and differential, resulting in a loss of drive power or loss of park function.
Consequence & remedy
Consequence: A loss of drive power can increase the risk of a crash. A loss of park function can cause an unintended vehicle rollaway which can increase the risk of a crash or injury.
Remedy: FCA US LLC will notify owners, and dealers will perform a software update, free of charge. Owner notification letters were mailed May 11, 2023. Owners may contact FCA USA LLC customer service at 1-800-853-1403. FCA's number for this recall is 45A. This recall expands previous recall number 20V-343.
Jun 11, 2020
Chrysler (FCA US LLC) is recalling certain 2014-2017 Jeep Cherokee vehicles equipped with a two-speed Power Transfer Unit (PTU). Relative movement in the Power Transfer Unit (PTU) between the differential input splines and the transmission output shaft may cause some input spline teeth to wear off, which may eventually cause a loss of engagement between the transmission and the differential inside the PTU. If this occurs, power cannot be transferred between the front wheels and the transmission which results in a loss of drive while the vehicle is in motion and a loss of the Park function while stationary.
Consequence & remedy
Consequence: A loss of drive can cause a vehicle crash without prior warning. A loss of the Park function can cause unintended vehicle rollaway which can increase the risk of a crash or injury.
Remedy: FCA US LLC will notify owners, and dealers will perform a software update that will maintain vehicle propulsion by engaging rear wheel drive and prevent rolling in Park by activating the electronic parking brake if a failed input spline occurs. This recall began July 14, 2020. Owners may contact FCA USA LLC customer service at 1-800-853-1403. FCA's number for this recall is W47.
Additional source detail variants (2)
Power Train:driveline:differential Unit
Chrysler (FCA US LLC) is recalling certain 2014-2017 Jeep Cherokee vehicles equipped with a two-speed Power Transfer Unit (PTU). Relative movement in the Power Transfer Unit (PTU) between the differential input splines and the transmission output shaft may cause some input spline teeth to wear off, which may eventually cause a loss of engagement between the transmission and the differential inside the PTU. If this occurs, power cannot be transferred between the front wheels and the transmission which results in a loss of drive while the vehicle is in motion and a loss of the Park function while stationary.
Consequence: A loss of drive can cause a vehicle crash without prior warning. A loss of the Park function can cause unintended vehicle rollaway which can increase the risk of a crash or injury.
Remedy: FCA US LLC will notify owners, and dealers will perform a software update that will maintain vehicle propulsion by engaging rear wheel drive and prevent rolling in Park by activating the electronic parking brake if a failed input spline occurs. This recall began July 14, 2020. Owners may contact FCA USA LLC customer service at 1-800-853-1403. FCA's number for this recall is W47.
Power Train:automatic Transmission
Chrysler (FCA US LLC) is recalling certain 2014-2017 Jeep Cherokee vehicles equipped with a two-speed Power Transfer Unit (PTU). Relative movement in the Power Transfer Unit (PTU) between the differential input splines and the transmission output shaft may cause some input spline teeth to wear off, which may eventually cause a loss of engagement between the transmission and the differential inside the PTU. If this occurs, power cannot be transferred between the front wheels and the transmission which results in a loss of drive while the vehicle is in motion and a loss of the Park function while stationary.
Consequence: A loss of drive can cause a vehicle crash without prior warning. A loss of the Park function can cause unintended vehicle rollaway which can increase the risk of a crash or injury.
Remedy: FCA US LLC will notify owners, and dealers will perform a software update that will maintain vehicle propulsion by engaging rear wheel drive and prevent rolling in Park by activating the electronic parking brake if a failed input spline occurs. This recall began July 14, 2020. Owners may contact FCA USA LLC customer service at 1-800-853-1403. FCA's number for this recall is W47.
May 17, 2018
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence & remedy
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Additional source detail variants (3)
Electrical System:software
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Vehicle Speed Control:cruise Control
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Electrical System:wiring
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Aug 31, 2017
Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash.
Remedy: Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.
Additional source detail variants (2)
Equipment:other:labels
Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
Consequence: The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash.
Remedy: Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.
Wheels:rim
Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
Consequence: The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash.
Remedy: Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.
Nov 2, 2016
Chrysler (FCA US LLC) is recalling certain model year 2017 Jeep Cherokee vehicles manufactured October 13, 2016, to October 17, 2016. Improper welds on the driver's knee air bag inflator may prevent the air bag from properly inflating.
Consequence & remedy
Consequence: If the driver's knee air bag does not properly inflate, there is an increased risk of injury in the event of a crash.
Remedy: Chrysler will notify owners, and dealers will replace the driver's knee air bag module, free of charge. The recall began November 9, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S84.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Illustration