2023 Hyundai Santa Fe PLUG-IN Hybrid

While on the highway my car lost power, gradually slowing down to a stall. I was able to safely park on the side of the road. I got the car to a nearby dealership that kept it for 10 days. The dealership said that the problem was code P2118 (Throttle Actuator Control Motor Current Range/Performance) that the air "flap" was frozen stuck shut and the engine was disabled on the freeway in order to prevent damage. The resolution was "waited for it to thaw and cleared the code". The dealer has a service bulletin and a software update but it did not resolve the safety issue. I've noticed hesitation when accelerating the car from a dead stop as well, which started last year.

Two issues with powertrain/transmission: 1- The powertrain/transmission fails intermittently- vehicle RPM goes sky high but vehicle receives no power, seems to fail/lose power. Has happened in very dangerous road conditions where unexpectedly was struggling to get the motor to engage/get power to the vehicle. Check engine and check hybrid system lights accompanies the problem. 2- The car should be driveable in electric only mode without use of gasoline. The powertrain/transmission seems to struggle to shift between electric and gas motors. HYUNDAI cannot seem to correctly diagnose or fix the issue. Does not seem they have proper diagnostic process included on the car- despite finding error messages stored in computer, they initially said they could not recreate the problem and therefore could not fix. 3 different trips to Hyundai dealership repair center, in total they have had my car for 10 weeks. They have replaced the transaxle and sent the car home, but that did not cure the issue. They now have my car again. It just does not seem they know how to identify or fix the issue. From online forums, I have learned MANY owners are experiencing the same problem and the same challenge to diagnose.

>>>>What component or system failed or malfunctioned, and is it available for inspection upon request? According to the Hyundai Bluelink app, the problem is caused by the battery management system, producing error code P0AA600. The result is that the vehicle does not get power to the wheels for a few seconds after giving it gas. It looks like the car is not moving, then it very slowly gains speed, followed by sudden acceleration. It is available for inspection upon request. >>>>How was your safety or the safety of others put at risk? It is a safety issue because other vehicles on the road may not be able to stop in time when the car pauses unexpectedly. Also the driver cannot predict when the car will surge forward. Merging or crossing traffic is very dangerous. >>>>Has the problem been reproduced or confirmed by a dealer or independent service center? The vehicle has been to the dealership two times to be inspected for this problem. They state that they cannot duplicate the issue but of course they can see the error code in the vehicle history. It is an issue that occurs at random; not every time the car is driven. It has occurred a total of 9 times during the 2,872 miles we have driven since we purchased it. >>>>Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Only the dealer has inspected the vehicle. Police, insurance, or others have not been involved. >>>>Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? There is no warning that the error is going to occur. There is a warning when it is occurring, and the check engine light comes on. We purchased the car as new when it had 6,934 miles on it. It had been used as a demonstration car for the dealership. The error first occurred at about 7500 miles.