IllustrationCONSUMER COMPLAINED ABOUT A BRAKE PROBLEM. WHEN DRIVER APPLIED BRAKES WHILE DRIVING 25-30 MPH VEHICLE DID NOT STOP. CONSUMER'S VEHICLE REAR ENDED VEHICLE IN FRONT. CURRENTLY, VEHICLE WAS BEING RECALLED FOR BRAKE MALFUNCTION.*AK
2001 Hyundai Elantra
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2001 Hyundai Elantra do not stand out strongly from the model-year median of 182.
About this comparison →How this year compares
Owner complaints by model year
Compare all Elantra years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
300–25K
2825–50K
4350–75K
3775–100K
36100–150K
23150K+
197 reports with mileage · 118 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 118 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Suspension. Review the 81 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 28 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
71 crash reports4 fire reports49 injury reports
Service Brakes, Hydraulic complaints
21 reportsWHILE DRIVING AT VARIOUS SPEEDS DRIVER DEPRESSED THE BRAKE PEDAL THE VEHICLE TOOK LONGER TO OPERATE, SO EXTENDED STOPPING DISTANCE WAS NECESSARY. *AK
WHILE DRIVING AT 30 MPH DRIVER APPLIED THE BRAKES AND THEY FAILED. VEHICLE TOOK LONGER TO STOP,AND IT REAR ENDED ANOTHER VEHICLE. PRIOR TO THE ACCIDENT, CONSUMER CALLED THE DEALER TO VERIFY IF NHTSA RECALL 03V25700 CONCERNING ABS FAILURE APPLIED TO HER VEHICLE. DEALER DENIED IT. THREE WEEKS AFTER THE ACCIDENT CONSUMER…
Read full complaint
WHILE DRIVING AT 30 MPH DRIVER APPLIED THE BRAKES AND THEY FAILED. VEHICLE TOOK LONGER TO STOP,AND IT REAR ENDED ANOTHER VEHICLE. PRIOR TO THE ACCIDENT, CONSUMER CALLED THE DEALER TO VERIFY IF NHTSA RECALL 03V25700 CONCERNING ABS FAILURE APPLIED TO HER VEHICLE. DEALER DENIED IT. THREE WEEKS AFTER THE ACCIDENT CONSUMER RECEIVED A RECALL LETTER ON THE ABS SYSTEM.*AK
BRAKING FROM HIGHWAY SPEEDS 70 DOWN TO 50 RESULTS IN SERIOUS VIBRATION AND PULSATION DUE TO OUT OF ROUND DISC BRAKE ROTORS. FEELS LIKE POSSIBLE LOSS OF BRAKING CONTROL. PROBLEM HAS EXISTED SINCE VEHICLE WAS NEW AND CORRECTED ONLY BY MACHINING THE FRONT BRAKE ROTORS. ORIGINAL ROTORS MACHINED 3 TIMES IN 65000 MILES. ORIGINAL R…
Read full complaint
BRAKING FROM HIGHWAY SPEEDS 70 DOWN TO 50 RESULTS IN SERIOUS VIBRATION AND PULSATION DUE TO OUT OF ROUND DISC BRAKE ROTORS. FEELS LIKE POSSIBLE LOSS OF BRAKING CONTROL. PROBLEM HAS EXISTED SINCE VEHICLE WAS NEW AND CORRECTED ONLY BY MACHINING THE FRONT BRAKE ROTORS. ORIGINAL ROTORS MACHINED 3 TIMES IN 65000 MILES. ORIGINAL ROTORS RECENTLY REPLACED WITH NEW OEM PARTS AND PROBLEM OCCURED AGAIN WITHIN 5K MILES. COMPLAINED TO DEALER AND HYUNDAI REGIONAL MANAGER. EXPLANATION WAS THAT ROTORS ARE NOT DEFECTIVE IF OUT OF ROUND AND CONDITION CAN BE CORRECTED BY MACHINING. APPEARS ROTORS ARE UNABLE TO WITHSTAND BRAKING TEMPERATURES AND WARP AS RESULT. QUALITY OF STEEL MATERIAL USED IN MANUFACTURING THE ROTORS APPEARS POOR. HYUNDAI DOES NOT SEEM TO ACKNOWLEDGE PROBLEM WITH FLAW IN MANUFACTURING PROCESS.*AK
ABS WARNING LIGHT INTERMITTENTLY FLASHES ON AND STAYS ON WHILE DRIVING. THIS COULD RESULT IN EITHER NONE DEPLOYMENT OR PREMATURE DEPLOYMENT OF AIR BAGS. CAUSE OF THE PROBLEM UNDETERMINED. *AK ABL.PCO
AIR BAG LIGHT CONTINUED TO ILLUMINATE EVEN AFTER (4) ATTEMPTS BY THE DEALERSHIP. THE ACTUAL CAUSE HAD NOT BEEN IDENTIFIED. MR ALSO THE VEHICLE EXPERIENCED BRAKE PROBLEMS. PH *JB ABL.PCO
THE BRAKE ROTOR OVERHEATED, WHICH CAUSED A GRINDING NOISE WHEN THE BRAKES WERE APPLIED. DEALER IS AWARE OF THE PROBLEM. MR *TT *JB
THE NEXT DAY AFTER PURCHASE AND THE FIRST TIME I USED THE AUTO IN REVERSE THERE WAS A LOUD CLUNK FROM THE REAR RIGHT SIDE OF THE BRAKES. IT SOUND LIKE THE BRAKE SHOES WERE LOOSE AND THE RETAINING SPRINGS PULLED THE SHOES INTO PROPER ALIGNMENT WHEN THE SELF ADJUSTING BRAKES CAME INTO OPERATION. I WAS ON AN APPROCH RAMP AT 55 M…
Read full complaint
THE NEXT DAY AFTER PURCHASE AND THE FIRST TIME I USED THE AUTO IN REVERSE THERE WAS A LOUD CLUNK FROM THE REAR RIGHT SIDE OF THE BRAKES. IT SOUND LIKE THE BRAKE SHOES WERE LOOSE AND THE RETAINING SPRINGS PULLED THE SHOES INTO PROPER ALIGNMENT WHEN THE SELF ADJUSTING BRAKES CAME INTO OPERATION. I WAS ON AN APPROCH RAMP AT 55 MILES AN HOUR TO MERGE AT 65 TO ONCOMING TRAFFIC. I WAS LOOKING BACK FOR ON COMING TRAFFIC, I LOOK UP AND A CAR WAS STOPPED, I SLAMMED ON THE BRAKES. THE CAR FINALLY STOP INCHES FROM THE AUTO AHEAD. NO SKID MARK. THE WHEELS DIDNT LOCKUP. I BROUGT THE CAR IN. ON ADVISE OF THE FACTORU THE CLEAND UP THE ROTORS, REPLACED THE FRONT PADS. THIS A POSITIVE INDICATION THAT THEY ARE AWARE OF SUCH A PROBLEM. UPON A TEST DRIVE ON MY OWN I FOUND I COULD NOT LOCK UP THE BRAKES. LATER I TOOK THE CAR BACK AND HAD THE SERVICE MANAGER TEST DRIVE THE CAR WITH ME. HE ALSO COULD NOT LOCK UP THE BRAKES. HE SAID HE TEST DROVE 2 OTHER ELANTRAS AND THEY REACTED THE SAME. POLICE MEASURE SPEED AT AN ACCIDENT BY THE SKID MARKS LEFT. IF I WERE TO GET INTO AN ACCIDENT THEY WOULD FIND NO SKID AN ASSUME I DIDNT EVEN APPLY THE BRAKES!!! THESE ARE NOT ANTI LOCK. I'M WORRIED. I NEED HELP BEFORE I'M KILLED AND THE ACCIDENT REPORT SAYS, HE DIDNT EVEN APPLY THE BRAKES. THERE WERE NOT SKID MARKS AND THE POLICE COULD ONLY SPECULATE AT WHAT SPEED HE MUST HAVE BEEN TRAVELING. H E MUST HAVE BEEN DRUNK, HAD A HEART ATTACK OR PASSED OUT.*AK
CONSUMER APPLIED BRAKES AT 30-35 MPH, VEHICLE DID NOT SLOW DOWN. CONSUMER PUMPED BRAKE PEDAL NUMEROUS TIMES, NO BRAKING ACTION, VEHICLE HIT A CONCRETE WALL. VEHICLE WAS TOTALLED.*AK DRIVER AND PASSENGER SUFFERED INJURIES. NONE OF THE AIR BAGS DEPLOYED IN THE ACCIDENT. *JG
NO SUMMARY LISTED FOR ABOVE VEHICLE. *AK
Official recalls
609V125000 · Suspension:front:control Arm
Apr 16, 2009
HYUNDAI IS RECALLING 160,904 MY 2001-2003 ELANTRA AND MY 2003 TIBURON VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA. ROAD SALT USED DURING THE WINTER MONTHS IN THESE JURISDICTIONS MAY RESULT IN INTERNAL CORROSION AND THINNING OF THE STEEL IN THE FRONT LOWER CONTROL ARMS. THE CORROSION MAY PROGRESS TO THE POINT WHERE THE LOWER CONTROL ARM'S UPPER AND LOWER PANELS BECOME PERFORATED. A PERFORATED FRONT LOWER CONTROL ARM MAY FRACTURE BETWEEN ITS BALL JOINT ATTACHMENT AND THE FORWARD AND REARWARD PIVOT ATTACHMENTS TO THE CHASSIS.
Consequence & remedy
Consequence: THE FRACTURING OF THE CONTROL ARM COULD AN OWNER'S CONTROL OVER THEIR VEHICLE THAT MAY INCREASE THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT THE FRONT LOWER CONTROL ARMS FOR CORROSION DAMAGE. IF SPECIFIED LEVELS OF INTERNAL CORROSION DAMAGE ARE FOUND, THE FRONT LOWER CONTROL ARMS WILL BE REPLACED WITH NEW FRONT LOWER CONTROL ARMS INCORPORATING ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS. IF THE FRONT LOWER CONTROL ARMS DO NOT REQUIRE REPLACEMENT, THE DEALER WILL ADD DRAINAGE HOLES TO THE FRONT LOWER CONTROL ARMS AND WILL TREAT THE FRONT LOWER CONTROL ARMS WITH RUST-PROOFING MATERIALS TO ARREST THE INTERNAL CORROSION PROCESS. THESE PROCEDURES WILL BE PERFORMED FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 17, 2009. OWNERS MAY CONTACT THE HYUNDAI CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.
08V532000 · Air Bags:frontal:sensor/control MODULE-INACTIVE
Oct 14, 2008
HYUNDAI IS RECALLING CERTAIN MY 2001 ELANTRA VEHICLES. IF A LIQUID IS SPILLED IN THE AREA OF THE CUPHOLDER ON THE CENTER CONSOLE, IT MAY SEEP THROUGH THE CONSOLE OPENING FOR THE PARKING BRAKE LEVER AND THEN DRIP ONTO THE AIR BAG CONTROL MODULE ELECTRICAL CONNECTOR. THE SPILLED LIQUID MAY CONTAMINATE THE AIR BAG CONTROL MODULE AND ITS ELECTRICAL CONNECTOR TO THE AIR BAG WIRING HARNESS AND CAUSE THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) WARNING LIGHT TO ILLUMINATE.
Consequence & remedy
Consequence: THIS CONDITION MAY AFFECT THE DRIVER AND PASSENGER FRONTAL AIR BAGS AND MAY PREVENT AIR BAG DEPLOYMENT DURING A CRASH WHERE SUCH DEPLOYMENT SHOULD OCCUR. NON-DEPLOYMENT OF THE SRS AIR BAGS MAY INCREASE THE RISK OF INJURY TO THE DRIVER AND FRONT PASSENGER UNDER CERTAIN CRASH CONDITIONS.
Remedy: DEALERS WILL INSTALL A PROTECTIVE COVER OVER THE VEHICLE'S AIR BAG CONTROL MODULE CONNECTOR. THE RECALL OWNER NOTIFICATION BEGAN ON NOVEMBER 30, 2008, AND LETTERS WILL BE SENT OUT IN SIX MAILINGS. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.
08V533000 · Air Bags:frontal:sensor/control MODULE-INACTIVE
Oct 14, 2008
HYUNDAI IS RECALLING CERTAIN MY 2001-2002 ELANTRA VEHICLES. MOVEMENT OF THE SIDE IMPACT AIR BAG WIRING HARNESS MOUNTED UNDER EACH FRONT SEAT, POSSIBLY CAUSED BY CONTACT FROM MATERIALS PLACED UNDER THE SEAT, MAY RESULT IN AN ELECTRICAL RESISTANCE THAT WOULD CAUSE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) WARNING LIGHT ILLUMINATION.
Consequence & remedy
Consequence: THIS CONDITION ONLY RELATES TO THE DRIVER AND PASSENGER SEAT MOUNTED SIDE IMPACT AIR BAGS AND MAY PREVENT SEAT MOUNTED SIDE IMPACT AIR BAG DEPLOYMENT DURING A CRASH WHERE SUCH DEPLOYMENT SHOULD OCCUR. NON-DEPLOYMENT OF THE SRS AIR BAGS MAY INCREASE THE RISK OF INJURY TO THE DRIVER AND FRONT PASSENGER UNDER CERTAIN CRASH CONDITIONS.
Remedy: DEALERS WILL INSTALL NEW SIDE IMPACT AIR BAG WIRING HARNESS CONNECTOR CLIPS AND REVISED SIDE IMPACT AIR BAG WIRING HARNESS ATTACHMENTS UNDER THE DRIVER'S AND FRONT PASSENGER'S SEATS. THE RECALL IS EXPECTED TO BEGIN DURING THE FOURTH QUARTER OF 2008, AND WILL BE SENT OUT IN SIX MAILINGS. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.
03V496000 · Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings
Dec 3, 2003
ON CERTAIN PASSENGER VEHICLES, THE BRAKE TUBES FOR THE REAR BRAKES CAN CONTACT THE STEERING GEARBOX MOUNTING BRACKETS.
Consequence & remedy
Consequence: CONTACT BETWEEN THE REAR BRAKE TUBES AND THE STEERING GEARBOX MOUNTING BRACKETS MAY RESULT IN REAR BRAKE TUBE WEAR AND CORROSION, INCREASING THE RISK OF BRAKE FLUID LEAKAGE. BRAKE FLUID LEAKAGE COULD RESULT IN REDUCED BRAKING CAPABILITY, WHICH COULD RESULT IN A CRASH.
Remedy: DEALERS WILL REPOSITION THE REAR BRAKE TUBES, INSTALL BRAKE TUBE CLIPS, AND APPLY ANTI-CORROSION MATERIAL TO THE REAR BRAKE TUBES. OWNER NOTIFICATION BEGAN JANUARY 22, 2004. OWNERS SHOULD CONTACT HYUNDAI OF PUERTO RICO AT 1-800-633-5151.
03V257000 · Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings
Jul 22, 2003
ON CERTAIN PASSENGER VEHICLES, THE REAR BRAKE TUBES PASS BEHIND THE FRONT SUSPENSION CROSSMEMBER. TWO STEERING GEARBOX MOUNTING BRACKETS ARE WELDED TO THE CROSSMEMBER. ON VEHICLES EQUIPPED WITH AN ANTILOCK BRAKE SYSTEM (ABS), THE REAR BRAKE TUBES COULD CONTACT BOTH STEERING GEARBOX MOUNTING BRACKETS. ON VEHICLES THAT ARE NOT EQUIPPED WITH ABS, THE REAR BRAKE TUBES MAY CONTACT ONLY THE LEFT MOUNTING BRACKET. CONTACT BETWEEN THE REAR BRAKE TUBES AND THE STEERING BRACKETS COULD CAUSE WEAR AND CORROSION THAT COULD RESULT IN BRAKE FLUID LEAKAGE.
Consequence & remedy
Consequence: FLUID LEAKAGE COULD RESULT IN REDUCED BRAKING CAPABILITY INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPOSITION THE REAR BRAKE TUBES SO THEY DO NOT CONTACT THE MOUNTING BRACKETS, INSTALL BRAKE TUBE CLIPS TO CONTROL THE LOCATION OF THE REAR BRAKE TUBES, AND APPLY ANTI-CORROSION MATERIAL TO THE TUBES IN THE AREAS WHERE CONTACT WITH THE MOUNTING BRACKETS MAY HAVE OCCURRED. OWNER NOTIFICATION BEGAN ON OCTOBER 13, 2003. OWNERS SHOULD CONTACT HYUNDAI AT 1-800-633-5151.
00V332000 · Air Bags:side/window
Oct 17, 2000
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SUPPLEMENTAL RESTRAINT SYSTEM SIDE AIR BAG SATELLITE SENSORS INSTALLED WERE IMPROPERLY MANUFACTURED, CAUSING THE AIR BAG WARNING LIGHT TO ILLUMINATE AND THE SIDE AIR BAGS TO NOT DEPLOY AS INTENDED IN THE EVENT OF A CRASH.
Consequence & remedy
Consequence: NON-DEPLOYMENT OF THE SIDE AIR BAGS COULD INCREASE THE RISK OF INJURY DURING A CRASH WHERE SIDE AIR BAG DEPLOYMENT IS INTENDED.
Remedy: DEALERS WILL REPLACE THE TWO SATELLITE SENSORS.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
3PE09011 · Front Lower Control Arms Rusting
Opened Feb 18, 2009 · Closed Apr 21, 2009
Status: closed (inferred from source dates) · Suspension:front; Suspension:front:control Arm; Suspension:front:control Arm:lower Arm
ON APRIL 14, 2009, HYUNDAI MOTOR CORPORATION SUBMITTED TO ODI A DEFECT INFORMATION REPORT INDICATING THAT IT WOULD RECALL A SALT-BELT POPULATION OF APPROXIMATELY 155,317 MODEL YEAR (MY) 2001 THROUGH 2003 HYUNDAI ELANTRA VEHICLES TO REMEDY A DEFECT THAT CAN RESULT IN LOSS OF VEHICLE CONTROL WITH AN INCREASED RISK OF A CRASH WHILE DRIVING (09V-125).THE AFFECTED VEHICLES COVER ALL MY 2001, MY 2002, AND MY 2003 THROUGH JANUARY 13, 2003 PRODUCTION.THESE INCLUDE ELANTRA VEHICLES THAT WERE ORIGINALLY SOLD OR CURRENTLY REGISTERED IN CONNECTICUT, DELAWARE, DISTRICT OF COLUMBIA, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA AND WISCONSIN.THE TOTAL THREE-YEAR PRODUCTION POPULATION FOR THE ELANTRA VEHICLES IS APPROXIMATELY 350,000. ACCORDING TO HYUNDAI, ROAD SALT CAN COLLECT IN THE OUTBOARD PORTION OF THE FRONT LOWER CONTROL ARM AND MAY RESULT IN INTERNAL CORROSION LEADING TO THINNING OF THE STEEL IN THE LOWER CONTROL ARMS.THE CORROSION MAY PROGRESS TO THE POINT WHERE THE LOWER CONTROL ARM UPPER AND LOWER PANELS BECOME PERFORATED.A PERFORATED FRONT LOWER CONTROL ARM MAY FRACTURE BETWEEN ITS BALL JOINT ATTACHMENT AND THE FORWARD AND REARWARD PIVOT ATTACHMENTS TO THE CHASSIS.THIS COULD AFFECT THE DRIVER'S CONTROL OVER THE TIRE AND WHEEL ASSEMBLY.HYUNDAI'S RECALL PROCEDURE INSTRUCTS DEALERS TO MEASURE THE THICKNESS OF THE STEEL IN THE FRONT LOWER CONTROL ARMS.IF SPECIFIED LEVELS OF CORROSION DAMAGE HAVE OCCURRED, THE FRONT LOWER CONTROL ARMS WILL BE REPLACED WITH NEW FRONT LOWER CONTROL ARMS WITH ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS. ODI'S ANALYSIS OF FRONT LOWER CONTROL ARM COMPLAINT AND WARRANTY DATA SHOWS 220 COMPLAINTS AND 1,033 WARRANTY CLAIMS FOR THE TOTAL APPROXIMATELY 350,000 SUBJECT VEHICLES SOLD THROUGHOUT THE UNITED STATES, RESULTING IN A COMPLAINT RATE OF 62.82 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.3 PERCENT.ODI'S ANALYSIS FOUND 7 COMPLAINTS AND 90 WARRANTY CLAIMS IN 132,475 VEHICLES SOLD IN NON-SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 5.3 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.1 PERCENT. ODI'S ANALYSIS FURTHER FOUND 196 COMPLAINTS AND 943 WARRANTY CLAIMS IN 155,317 VEHICLES SOLD IN SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 126.2 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.6 PERCENT.ODI IDENTIFIED 34 INCIDENTS OF LOWER CONTROL ARM FRACTURE RELATED TO CORROSION, ALL OF WHICH OCCURRED IN SALT BELT STATES.THE DATA DO NOT SHOW A DEFECT TREND IN VEHICLES OUTSIDE THE REGION COVERED BY HYUNDAI'S RECALL. THIS PRELIMINARY EVALUATION IS CLOSED.
Additional source detail variants (3)
Suspension:front:control Arm
ON APRIL 14, 2009, HYUNDAI MOTOR CORPORATION SUBMITTED TO ODI A DEFECT INFORMATION REPORT INDICATING THAT IT WOULD RECALL A SALT-BELT POPULATION OF APPROXIMATELY 155,317 MODEL YEAR (MY) 2001 THROUGH 2003 HYUNDAI ELANTRA VEHICLES TO REMEDY A DEFECT THAT CAN RESULT IN LOSS OF VEHICLE CONTROL WITH AN INCREASED RISK OF A CRASH WHILE DRIVING (09V-125).THE AFFECTED VEHICLES COVER ALL MY 2001, MY 2002, AND MY 2003 THROUGH JANUARY 13, 2003 PRODUCTION.THESE INCLUDE ELANTRA VEHICLES THAT WERE ORIGINALLY SOLD OR CURRENTLY REGISTERED IN CONNECTICUT, DELAWARE, DISTRICT OF COLUMBIA, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA AND WISCONSIN.THE TOTAL THREE-YEAR PRODUCTION POPULATION FOR THE ELANTRA VEHICLES IS APPROXIMATELY 350,000. ACCORDING TO HYUNDAI, ROAD SALT CAN COLLECT IN THE OUTBOARD PORTION OF THE FRONT LOWER CONTROL ARM AND MAY RESULT IN INTERNAL CORROSION LEADING TO THINNING OF THE STEEL IN THE LOWER CONTROL ARMS.THE CORROSION MAY PROGRESS TO THE POINT WHERE THE LOWER CONTROL ARM UPPER AND LOWER PANELS BECOME PERFORATED.A PERFORATED FRONT LOWER CONTROL ARM MAY FRACTURE BETWEEN ITS BALL JOINT ATTACHMENT AND THE FORWARD AND REARWARD PIVOT ATTACHMENTS TO THE CHASSIS.THIS COULD AFFECT THE DRIVER'S CONTROL OVER THE TIRE AND WHEEL ASSEMBLY.HYUNDAI'S RECALL PROCEDURE INSTRUCTS DEALERS TO MEASURE THE THICKNESS OF THE STEEL IN THE FRONT LOWER CONTROL ARMS.IF SPECIFIED LEVELS OF CORROSION DAMAGE HAVE OCCURRED, THE FRONT LOWER CONTROL ARMS WILL BE REPLACED WITH NEW FRONT LOWER CONTROL ARMS WITH ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS. ODI'S ANALYSIS OF FRONT LOWER CONTROL ARM COMPLAINT AND WARRANTY DATA SHOWS 220 COMPLAINTS AND 1,033 WARRANTY CLAIMS FOR THE TOTAL APPROXIMATELY 350,000 SUBJECT VEHICLES SOLD THROUGHOUT THE UNITED STATES, RESULTING IN A COMPLAINT RATE OF 62.82 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.3 PERCENT.ODI'S ANALYSIS FOUND 7 COMPLAINTS AND 90 WARRANTY CLAIMS IN 132,475 VEHICLES SOLD IN NON-SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 5.3 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.1 PERCENT. ODI'S ANALYSIS FURTHER FOUND 196 COMPLAINTS AND 943 WARRANTY CLAIMS IN 155,317 VEHICLES SOLD IN SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 126.2 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.6 PERCENT.ODI IDENTIFIED 34 INCIDENTS OF LOWER CONTROL ARM FRACTURE RELATED TO CORROSION, ALL OF WHICH OCCURRED IN SALT BELT STATES.THE DATA DO NOT SHOW A DEFECT TREND IN VEHICLES OUTSIDE THE REGION COVERED BY HYUNDAI'S RECALL. THIS PRELIMINARY EVALUATION IS CLOSED.
Suspension:front:control Arm:lower Arm
ON APRIL 14, 2009, HYUNDAI MOTOR CORPORATION SUBMITTED TO ODI A DEFECT INFORMATION REPORT INDICATING THAT IT WOULD RECALL A SALT-BELT POPULATION OF APPROXIMATELY 155,317 MODEL YEAR (MY) 2001 THROUGH 2003 HYUNDAI ELANTRA VEHICLES TO REMEDY A DEFECT THAT CAN RESULT IN LOSS OF VEHICLE CONTROL WITH AN INCREASED RISK OF A CRASH WHILE DRIVING (09V-125).THE AFFECTED VEHICLES COVER ALL MY 2001, MY 2002, AND MY 2003 THROUGH JANUARY 13, 2003 PRODUCTION.THESE INCLUDE ELANTRA VEHICLES THAT WERE ORIGINALLY SOLD OR CURRENTLY REGISTERED IN CONNECTICUT, DELAWARE, DISTRICT OF COLUMBIA, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA AND WISCONSIN.THE TOTAL THREE-YEAR PRODUCTION POPULATION FOR THE ELANTRA VEHICLES IS APPROXIMATELY 350,000. ACCORDING TO HYUNDAI, ROAD SALT CAN COLLECT IN THE OUTBOARD PORTION OF THE FRONT LOWER CONTROL ARM AND MAY RESULT IN INTERNAL CORROSION LEADING TO THINNING OF THE STEEL IN THE LOWER CONTROL ARMS.THE CORROSION MAY PROGRESS TO THE POINT WHERE THE LOWER CONTROL ARM UPPER AND LOWER PANELS BECOME PERFORATED.A PERFORATED FRONT LOWER CONTROL ARM MAY FRACTURE BETWEEN ITS BALL JOINT ATTACHMENT AND THE FORWARD AND REARWARD PIVOT ATTACHMENTS TO THE CHASSIS.THIS COULD AFFECT THE DRIVER'S CONTROL OVER THE TIRE AND WHEEL ASSEMBLY.HYUNDAI'S RECALL PROCEDURE INSTRUCTS DEALERS TO MEASURE THE THICKNESS OF THE STEEL IN THE FRONT LOWER CONTROL ARMS.IF SPECIFIED LEVELS OF CORROSION DAMAGE HAVE OCCURRED, THE FRONT LOWER CONTROL ARMS WILL BE REPLACED WITH NEW FRONT LOWER CONTROL ARMS WITH ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS. ODI'S ANALYSIS OF FRONT LOWER CONTROL ARM COMPLAINT AND WARRANTY DATA SHOWS 220 COMPLAINTS AND 1,033 WARRANTY CLAIMS FOR THE TOTAL APPROXIMATELY 350,000 SUBJECT VEHICLES SOLD THROUGHOUT THE UNITED STATES, RESULTING IN A COMPLAINT RATE OF 62.82 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.3 PERCENT.ODI'S ANALYSIS FOUND 7 COMPLAINTS AND 90 WARRANTY CLAIMS IN 132,475 VEHICLES SOLD IN NON-SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 5.3 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.1 PERCENT. ODI'S ANALYSIS FURTHER FOUND 196 COMPLAINTS AND 943 WARRANTY CLAIMS IN 155,317 VEHICLES SOLD IN SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 126.2 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.6 PERCENT.ODI IDENTIFIED 34 INCIDENTS OF LOWER CONTROL ARM FRACTURE RELATED TO CORROSION, ALL OF WHICH OCCURRED IN SALT BELT STATES.THE DATA DO NOT SHOW A DEFECT TREND IN VEHICLES OUTSIDE THE REGION COVERED BY HYUNDAI'S RECALL. THIS PRELIMINARY EVALUATION IS CLOSED.
Suspension:front
ON APRIL 14, 2009, HYUNDAI MOTOR CORPORATION SUBMITTED TO ODI A DEFECT INFORMATION REPORT INDICATING THAT IT WOULD RECALL A SALT-BELT POPULATION OF APPROXIMATELY 155,317 MODEL YEAR (MY) 2001 THROUGH 2003 HYUNDAI ELANTRA VEHICLES TO REMEDY A DEFECT THAT CAN RESULT IN LOSS OF VEHICLE CONTROL WITH AN INCREASED RISK OF A CRASH WHILE DRIVING (09V-125).THE AFFECTED VEHICLES COVER ALL MY 2001, MY 2002, AND MY 2003 THROUGH JANUARY 13, 2003 PRODUCTION.THESE INCLUDE ELANTRA VEHICLES THAT WERE ORIGINALLY SOLD OR CURRENTLY REGISTERED IN CONNECTICUT, DELAWARE, DISTRICT OF COLUMBIA, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA AND WISCONSIN.THE TOTAL THREE-YEAR PRODUCTION POPULATION FOR THE ELANTRA VEHICLES IS APPROXIMATELY 350,000. ACCORDING TO HYUNDAI, ROAD SALT CAN COLLECT IN THE OUTBOARD PORTION OF THE FRONT LOWER CONTROL ARM AND MAY RESULT IN INTERNAL CORROSION LEADING TO THINNING OF THE STEEL IN THE LOWER CONTROL ARMS.THE CORROSION MAY PROGRESS TO THE POINT WHERE THE LOWER CONTROL ARM UPPER AND LOWER PANELS BECOME PERFORATED.A PERFORATED FRONT LOWER CONTROL ARM MAY FRACTURE BETWEEN ITS BALL JOINT ATTACHMENT AND THE FORWARD AND REARWARD PIVOT ATTACHMENTS TO THE CHASSIS.THIS COULD AFFECT THE DRIVER'S CONTROL OVER THE TIRE AND WHEEL ASSEMBLY.HYUNDAI'S RECALL PROCEDURE INSTRUCTS DEALERS TO MEASURE THE THICKNESS OF THE STEEL IN THE FRONT LOWER CONTROL ARMS.IF SPECIFIED LEVELS OF CORROSION DAMAGE HAVE OCCURRED, THE FRONT LOWER CONTROL ARMS WILL BE REPLACED WITH NEW FRONT LOWER CONTROL ARMS WITH ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS. ODI'S ANALYSIS OF FRONT LOWER CONTROL ARM COMPLAINT AND WARRANTY DATA SHOWS 220 COMPLAINTS AND 1,033 WARRANTY CLAIMS FOR THE TOTAL APPROXIMATELY 350,000 SUBJECT VEHICLES SOLD THROUGHOUT THE UNITED STATES, RESULTING IN A COMPLAINT RATE OF 62.82 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.3 PERCENT.ODI'S ANALYSIS FOUND 7 COMPLAINTS AND 90 WARRANTY CLAIMS IN 132,475 VEHICLES SOLD IN NON-SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 5.3 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.1 PERCENT. ODI'S ANALYSIS FURTHER FOUND 196 COMPLAINTS AND 943 WARRANTY CLAIMS IN 155,317 VEHICLES SOLD IN SALT BELT STATES, RESULTING IN A COMPLAINT RATE OF 126.2 PER 100,000 VEHICLES AND A CLAIM RATE OF 0.6 PERCENT.ODI IDENTIFIED 34 INCIDENTS OF LOWER CONTROL ARM FRACTURE RELATED TO CORROSION, ALL OF WHICH OCCURRED IN SALT BELT STATES.THE DATA DO NOT SHOW A DEFECT TREND IN VEHICLES OUTSIDE THE REGION COVERED BY HYUNDAI'S RECALL. THIS PRELIMINARY EVALUATION IS CLOSED.
EA08012 · Air Bag Light Illumination
Opened Jul 10, 2008 · Closed Nov 14, 2008
Status: closed (inferred from source dates) · Air Bags; Air Bags:frontal; Air Bags:frontal:sensor/control MODULE-INACTIVE
HYUNDAI IS CONDUCTING TWO SAFETY RECALLS TO CORRECT TWO SAFETY DEFECTS DESCRIBED BELOW.UNDER SAFETY RECALL 08V-532, HYUNDAI WILL INSTALL A VINYL PROTECTIVE SHIELD/COVER TO PREVENT SHORT CIRCUITS IN THE AIR BAG CONTROL MODULE CAUSE BY SPILLS OF LIQUIDS THAT SEEP INTO THE MODULE CONNECTOR. THIS ACTION APPLIES TO 78,369 MY 2001 VEHICLES (BUILT THROUGH 4/26/2001).THE AIR BAG CONTROL MODULE CONNECTOR IN MY 2001 VEHICLES BUILT AFTER 4/26/2001 IS COVERED BY THE CARPET.TO IMPROVE THE INTEGRITY OF THE SIDE IMPACT AIR BAG WIRING HARNESS UNDER THE DRIVER AND FRONT PASSENGER SEATS, HYUNDAI WILL INSTALL NEW CLIPS AND REVISE THE WIRING HARNESS ATTACHMENTS UNDER SAFETY RECALL 08V-533.THIS APPLIES TO 150,541 MY 2001 THROUGH MY 2002 VEHICLES (BUILT THROUGH 12/18/2001).HYUNDAI UPGRADED THE WIRING HARNESS ROUTING/CONNECTOR CLIP ON MY 2002 VEHICLES BUILT AFTER 12/18/2001.HYUNDAI DESIGNED THE SUBJECT VEHICLES (UNDER SAFETY RECALL 08V-532) SUCH THAT THE AIR BAG CONTROL MODULE CONNECTOR IS LOCATED DIRECTLY BELOW THE CENTER CONSOLE CUP HOLDERS.SPILLAGE OF LIQUID FROM CUPS PLACED IN THE CUP HOLDERS MAY CONTAMINATE THE CONTROL MODULE AND THE CONNECTOR AND PREVENT PROPER DEPLOYMENT OF THE AIR BAGS.IN ADDITION, IN THE SUBJECT VEHICLES UNDER SAFETY RECALL 08V-533, HYUNDAI LOCATED A WIRING HARNESS FOR THE SIDE IMPACT AIR BAGS UNDER EACH FRONT SEAT.MOVEMENT OF THE SEAT OR PLACEMENT OF OBJECTS UNDER THE SEAT MAY DISTURB THE ELECTRICAL CONNECTION IN THE SIDE IMPACT AIR BAG WIRING CIRCUIT.FOR EACH OF THE ABOVE DESCRIBED CONDITIONS, THE AIR BAG WARNING LIGHT WILL ILLUMINATE WHEN THE VEHICLE DIAGNOSTIC SYSTEM DETECTS A FAULT.THIS INVESTIGATION IDENTIFIED SEVERAL CRASH REPORTS (TWO FATAL AND 17 CRASH REPORTS RESULTING IN NINE INJURY REPORTS) THAT INCLUDED ALLEGATIONS OF PRIOR AIR BAG WARNING LIGHT ILLUMINATION AND NON-DEPLOYMENT OF THE AIR BAGS, WHICH ARE NOT INCLUDED IN THE FAILURE REPORT SUMMARY.THIS ENGINEERING ANALYSIS IS CLOSED (SEE RECALLS 08V-532 & 08V533).
Additional source detail variants (6)
Air Bags:frontal
HYUNDAI IS CONDUCTING TWO SAFETY RECALLS TO CORRECT TWO SAFETY DEFECTS DESCRIBED BELOW.UNDER SAFETY RECALL 08V-532, HYUNDAI WILL INSTALL A VINYL PROTECTIVE SHIELD/COVER TO PREVENT SHORT CIRCUITS IN THE AIR BAG CONTROL MODULE CAUSE BY SPILLS OF LIQUIDS THAT SEEP INTO THE MODULE CONNECTOR. THIS ACTION APPLIES TO 78,369 MY 2001 VEHICLES (BUILT THROUGH 4/26/2001).THE AIR BAG CONTROL MODULE CONNECTOR IN MY 2001 VEHICLES BUILT AFTER 4/26/2001 IS COVERED BY THE CARPET.TO IMPROVE THE INTEGRITY OF THE SIDE IMPACT AIR BAG WIRING HARNESS UNDER THE DRIVER AND FRONT PASSENGER SEATS, HYUNDAI WILL INSTALL NEW CLIPS AND REVISE THE WIRING HARNESS ATTACHMENTS UNDER SAFETY RECALL 08V-533.THIS APPLIES TO 150,541 MY 2001 THROUGH MY 2002 VEHICLES (BUILT THROUGH 12/18/2001).HYUNDAI UPGRADED THE WIRING HARNESS ROUTING/CONNECTOR CLIP ON MY 2002 VEHICLES BUILT AFTER 12/18/2001.HYUNDAI DESIGNED THE SUBJECT VEHICLES (UNDER SAFETY RECALL 08V-532) SUCH THAT THE AIR BAG CONTROL MODULE CONNECTOR IS LOCATED DIRECTLY BELOW THE CENTER CONSOLE CUP HOLDERS.SPILLAGE OF LIQUID FROM CUPS PLACED IN THE CUP HOLDERS MAY CONTAMINATE THE CONTROL MODULE AND THE CONNECTOR AND PREVENT PROPER DEPLOYMENT OF THE AIR BAGS.IN ADDITION, IN THE SUBJECT VEHICLES UNDER SAFETY RECALL 08V-533, HYUNDAI LOCATED A WIRING HARNESS FOR THE SIDE IMPACT AIR BAGS UNDER EACH FRONT SEAT.MOVEMENT OF THE SEAT OR PLACEMENT OF OBJECTS UNDER THE SEAT MAY DISTURB THE ELECTRICAL CONNECTION IN THE SIDE IMPACT AIR BAG WIRING CIRCUIT.FOR EACH OF THE ABOVE DESCRIBED CONDITIONS, THE AIR BAG WARNING LIGHT WILL ILLUMINATE WHEN THE VEHICLE DIAGNOSTIC SYSTEM DETECTS A FAULT.THIS INVESTIGATION IDENTIFIED SEVERAL CRASH REPORTS (TWO FATAL AND 17 CRASH REPORTS RESULTING IN NINE INJURY REPORTS) THAT INCLUDED ALLEGATIONS OF PRIOR AIR BAG WARNING LIGHT ILLUMINATION AND NON-DEPLOYMENT OF THE AIR BAGS, WHICH ARE NOT INCLUDED IN THE FAILURE REPORT SUMMARY.THIS ENGINEERING ANALYSIS IS CLOSED (SEE RECALLS 08V-532 & 08V533).
Air Bags:frontal
HYUNDAI IS CONDUCTING TWO SAFETY RECALLS TO CORRECT TWO SAFETY DEFECTS DESCRIBED BELOW.UNDER SAFETY RECALL 08V-532, HYUNDAI WILL INSTALL A VINYL PROTECTIVE SHIELD/COVER TO PREVENT SHORT CIRCUITS IN THE AIR BAG CONTROL MODULE CAUSE BY SPILLS OF LIQUIDS THAT SEEP INTO THE MODULE CONNECTOR. THIS ACTION APPLIES TO 78,369 MY 2001 VEHICLES (BUILT THROUGH 4/26/2001).THE AIR BAG CONTROL MODULE CONNECTOR IN MY 2001 VEHICLES BUILT AFTER 4/26/2001 IS COVERED BY THE CARPET.TO IMPROVE THE INTEGRITY OF THE SIDE IMPACT AIR BAG WIRING HARNESS UNDER THE DRIVER AND FRONT PASSENGER SEATS, HYUNDAI WILL INSTALL NEW CLIPS AND REVISE THE WIRING HARNESS ATTACHMENTS UNDER SAFETY RECALL 08V-533.THIS APPLIES TO 150,541 MY 2001 THROUGH MY 2002 VEHICLES (BUILT THROUGH 12/18/2001).HYUNDAI UPGRADED THE WIRING HARNESS ROUTING/CONNECTOR CLIP ON MY 2002 VEHICLES BUILT AFTER 12/18/2001.HYUNDAI DESIGNED THE SUBJECT VEHICLES (UNDER SAFETY RECALL 08V-532) SUCH THAT THE AIR BAG CONTROL MODULE CONNECTOR IS LOCATED DIRECTLY BELOW THE CENTER CONSOLE CUP HOLDERS.SPILLAGE OF LIQUID FROM CUPS PLACED IN THE CUP HOLDERS MAY CONTAMINATE THE CONTROL MODULE AND THE CONNECTOR AND PREVENT PROPER DEPLOYMENT OF THE AIR BAGS.IN ADDITION, IN THE SUBJECT VEHICLES UNDER SAFETY RECALL 08V-533, HYUNDAI LOCATED A WIRING HARNESS FOR THE SIDE IMPACT AIR BAGS UNDER EACH FRONT SEAT.MOVEMENT OF THE SEAT OR PLACEMENT OF OBJECTS UNDER THE SEAT MAY DISTURB THE ELECTRICAL CONNECTION IN THE SIDE IMPACT AIR BAG WIRING CIRCUIT.FOR EACH OF THE ABOVE DESCRIBED CONDITIONS, THE AIR BAG WARNING LIGHT WILL ILLUMINATE WHEN THE VEHICLE DIAGNOSTIC SYSTEM DETECTS A FAULT.THIS INVESTIGATION IDENTIFIED SEVERAL CRASH REPORTS (TWO FATAL AND 17 CRASH REPORTS RESULTING IN NINE INJURY REPORTS) THAT INCLUDED ALLEGATIONS OF PRIOR AIR BAG WARNING LIGHT ILLUMINATION AND NON-DEPLOYMENT OF THE AIR BAGS, WHICH ARE NOT INCLUDED IN THE FAILURE REPORT SUMMARY.THIS ENGINEERING ANALYSIS IS CLOSED (SEE RECALLS 08V-532 & 08V533).
Air Bags:frontal:sensor/control MODULE-INACTIVE
HYUNDAI IS CONDUCTING TWO SAFETY RECALLS TO CORRECT TWO SAFETY DEFECTS DESCRIBED BELOW.UNDER SAFETY RECALL 08V-532, HYUNDAI WILL INSTALL A VINYL PROTECTIVE SHIELD/COVER TO PREVENT SHORT CIRCUITS IN THE AIR BAG CONTROL MODULE CAUSE BY SPILLS OF LIQUIDS THAT SEEP INTO THE MODULE CONNECTOR. THIS ACTION APPLIES TO 78,369 MY 2001 VEHICLES (BUILT THROUGH 4/26/2001).THE AIR BAG CONTROL MODULE CONNECTOR IN MY 2001 VEHICLES BUILT AFTER 4/26/2001 IS COVERED BY THE CARPET.TO IMPROVE THE INTEGRITY OF THE SIDE IMPACT AIR BAG WIRING HARNESS UNDER THE DRIVER AND FRONT PASSENGER SEATS, HYUNDAI WILL INSTALL NEW CLIPS AND REVISE THE WIRING HARNESS ATTACHMENTS UNDER SAFETY RECALL 08V-533.THIS APPLIES TO 150,541 MY 2001 THROUGH MY 2002 VEHICLES (BUILT THROUGH 12/18/2001).HYUNDAI UPGRADED THE WIRING HARNESS ROUTING/CONNECTOR CLIP ON MY 2002 VEHICLES BUILT AFTER 12/18/2001.HYUNDAI DESIGNED THE SUBJECT VEHICLES (UNDER SAFETY RECALL 08V-532) SUCH THAT THE AIR BAG CONTROL MODULE CONNECTOR IS LOCATED DIRECTLY BELOW THE CENTER CONSOLE CUP HOLDERS.SPILLAGE OF LIQUID FROM CUPS PLACED IN THE CUP HOLDERS MAY CONTAMINATE THE CONTROL MODULE AND THE CONNECTOR AND PREVENT PROPER DEPLOYMENT OF THE AIR BAGS.IN ADDITION, IN THE SUBJECT VEHICLES UNDER SAFETY RECALL 08V-533, HYUNDAI LOCATED A WIRING HARNESS FOR THE SIDE IMPACT AIR BAGS UNDER EACH FRONT SEAT.MOVEMENT OF THE SEAT OR PLACEMENT OF OBJECTS UNDER THE SEAT MAY DISTURB THE ELECTRICAL CONNECTION IN THE SIDE IMPACT AIR BAG WIRING CIRCUIT.FOR EACH OF THE ABOVE DESCRIBED CONDITIONS, THE AIR BAG WARNING LIGHT WILL ILLUMINATE WHEN THE VEHICLE DIAGNOSTIC SYSTEM DETECTS A FAULT.THIS INVESTIGATION IDENTIFIED SEVERAL CRASH REPORTS (TWO FATAL AND 17 CRASH REPORTS RESULTING IN NINE INJURY REPORTS) THAT INCLUDED ALLEGATIONS OF PRIOR AIR BAG WARNING LIGHT ILLUMINATION AND NON-DEPLOYMENT OF THE AIR BAGS, WHICH ARE NOT INCLUDED IN THE FAILURE REPORT SUMMARY.THIS ENGINEERING ANALYSIS IS CLOSED (SEE RECALLS 08V-532 & 08V533).
Air Bags:frontal:sensor/control MODULE-INACTIVE
HYUNDAI IS CONDUCTING TWO SAFETY RECALLS TO CORRECT TWO SAFETY DEFECTS DESCRIBED BELOW.UNDER SAFETY RECALL 08V-532, HYUNDAI WILL INSTALL A VINYL PROTECTIVE SHIELD/COVER TO PREVENT SHORT CIRCUITS IN THE AIR BAG CONTROL MODULE CAUSE BY SPILLS OF LIQUIDS THAT SEEP INTO THE MODULE CONNECTOR. THIS ACTION APPLIES TO 78,369 MY 2001 VEHICLES (BUILT THROUGH 4/26/2001).THE AIR BAG CONTROL MODULE CONNECTOR IN MY 2001 VEHICLES BUILT AFTER 4/26/2001 IS COVERED BY THE CARPET.TO IMPROVE THE INTEGRITY OF THE SIDE IMPACT AIR BAG WIRING HARNESS UNDER THE DRIVER AND FRONT PASSENGER SEATS, HYUNDAI WILL INSTALL NEW CLIPS AND REVISE THE WIRING HARNESS ATTACHMENTS UNDER SAFETY RECALL 08V-533.THIS APPLIES TO 150,541 MY 2001 THROUGH MY 2002 VEHICLES (BUILT THROUGH 12/18/2001).HYUNDAI UPGRADED THE WIRING HARNESS ROUTING/CONNECTOR CLIP ON MY 2002 VEHICLES BUILT AFTER 12/18/2001.HYUNDAI DESIGNED THE SUBJECT VEHICLES (UNDER SAFETY RECALL 08V-532) SUCH THAT THE AIR BAG CONTROL MODULE CONNECTOR IS LOCATED DIRECTLY BELOW THE CENTER CONSOLE CUP HOLDERS.SPILLAGE OF LIQUID FROM CUPS PLACED IN THE CUP HOLDERS MAY CONTAMINATE THE CONTROL MODULE AND THE CONNECTOR AND PREVENT PROPER DEPLOYMENT OF THE AIR BAGS.IN ADDITION, IN THE SUBJECT VEHICLES UNDER SAFETY RECALL 08V-533, HYUNDAI LOCATED A WIRING HARNESS FOR THE SIDE IMPACT AIR BAGS UNDER EACH FRONT SEAT.MOVEMENT OF THE SEAT OR PLACEMENT OF OBJECTS UNDER THE SEAT MAY DISTURB THE ELECTRICAL CONNECTION IN THE SIDE IMPACT AIR BAG WIRING CIRCUIT.FOR EACH OF THE ABOVE DESCRIBED CONDITIONS, THE AIR BAG WARNING LIGHT WILL ILLUMINATE WHEN THE VEHICLE DIAGNOSTIC SYSTEM DETECTS A FAULT.THIS INVESTIGATION IDENTIFIED SEVERAL CRASH REPORTS (TWO FATAL AND 17 CRASH REPORTS RESULTING IN NINE INJURY REPORTS) THAT INCLUDED ALLEGATIONS OF PRIOR AIR BAG WARNING LIGHT ILLUMINATION AND NON-DEPLOYMENT OF THE AIR BAGS, WHICH ARE NOT INCLUDED IN THE FAILURE REPORT SUMMARY.THIS ENGINEERING ANALYSIS IS CLOSED (SEE RECALLS 08V-532 & 08V533).
Air Bags
HYUNDAI IS CONDUCTING TWO SAFETY RECALLS TO CORRECT TWO SAFETY DEFECTS DESCRIBED BELOW.UNDER SAFETY RECALL 08V-532, HYUNDAI WILL INSTALL A VINYL PROTECTIVE SHIELD/COVER TO PREVENT SHORT CIRCUITS IN THE AIR BAG CONTROL MODULE CAUSE BY SPILLS OF LIQUIDS THAT SEEP INTO THE MODULE CONNECTOR. THIS ACTION APPLIES TO 78,369 MY 2001 VEHICLES (BUILT THROUGH 4/26/2001).THE AIR BAG CONTROL MODULE CONNECTOR IN MY 2001 VEHICLES BUILT AFTER 4/26/2001 IS COVERED BY THE CARPET.TO IMPROVE THE INTEGRITY OF THE SIDE IMPACT AIR BAG WIRING HARNESS UNDER THE DRIVER AND FRONT PASSENGER SEATS, HYUNDAI WILL INSTALL NEW CLIPS AND REVISE THE WIRING HARNESS ATTACHMENTS UNDER SAFETY RECALL 08V-533.THIS APPLIES TO 150,541 MY 2001 THROUGH MY 2002 VEHICLES (BUILT THROUGH 12/18/2001).HYUNDAI UPGRADED THE WIRING HARNESS ROUTING/CONNECTOR CLIP ON MY 2002 VEHICLES BUILT AFTER 12/18/2001.HYUNDAI DESIGNED THE SUBJECT VEHICLES (UNDER SAFETY RECALL 08V-532) SUCH THAT THE AIR BAG CONTROL MODULE CONNECTOR IS LOCATED DIRECTLY BELOW THE CENTER CONSOLE CUP HOLDERS.SPILLAGE OF LIQUID FROM CUPS PLACED IN THE CUP HOLDERS MAY CONTAMINATE THE CONTROL MODULE AND THE CONNECTOR AND PREVENT PROPER DEPLOYMENT OF THE AIR BAGS.IN ADDITION, IN THE SUBJECT VEHICLES UNDER SAFETY RECALL 08V-533, HYUNDAI LOCATED A WIRING HARNESS FOR THE SIDE IMPACT AIR BAGS UNDER EACH FRONT SEAT.MOVEMENT OF THE SEAT OR PLACEMENT OF OBJECTS UNDER THE SEAT MAY DISTURB THE ELECTRICAL CONNECTION IN THE SIDE IMPACT AIR BAG WIRING CIRCUIT.FOR EACH OF THE ABOVE DESCRIBED CONDITIONS, THE AIR BAG WARNING LIGHT WILL ILLUMINATE WHEN THE VEHICLE DIAGNOSTIC SYSTEM DETECTS A FAULT.THIS INVESTIGATION IDENTIFIED SEVERAL CRASH REPORTS (TWO FATAL AND 17 CRASH REPORTS RESULTING IN NINE INJURY REPORTS) THAT INCLUDED ALLEGATIONS OF PRIOR AIR BAG WARNING LIGHT ILLUMINATION AND NON-DEPLOYMENT OF THE AIR BAGS, WHICH ARE NOT INCLUDED IN THE FAILURE REPORT SUMMARY.THIS ENGINEERING ANALYSIS IS CLOSED (SEE RECALLS 08V-532 & 08V533).
Air Bags
HYUNDAI IS CONDUCTING TWO SAFETY RECALLS TO CORRECT TWO SAFETY DEFECTS DESCRIBED BELOW.UNDER SAFETY RECALL 08V-532, HYUNDAI WILL INSTALL A VINYL PROTECTIVE SHIELD/COVER TO PREVENT SHORT CIRCUITS IN THE AIR BAG CONTROL MODULE CAUSE BY SPILLS OF LIQUIDS THAT SEEP INTO THE MODULE CONNECTOR. THIS ACTION APPLIES TO 78,369 MY 2001 VEHICLES (BUILT THROUGH 4/26/2001).THE AIR BAG CONTROL MODULE CONNECTOR IN MY 2001 VEHICLES BUILT AFTER 4/26/2001 IS COVERED BY THE CARPET.TO IMPROVE THE INTEGRITY OF THE SIDE IMPACT AIR BAG WIRING HARNESS UNDER THE DRIVER AND FRONT PASSENGER SEATS, HYUNDAI WILL INSTALL NEW CLIPS AND REVISE THE WIRING HARNESS ATTACHMENTS UNDER SAFETY RECALL 08V-533.THIS APPLIES TO 150,541 MY 2001 THROUGH MY 2002 VEHICLES (BUILT THROUGH 12/18/2001).HYUNDAI UPGRADED THE WIRING HARNESS ROUTING/CONNECTOR CLIP ON MY 2002 VEHICLES BUILT AFTER 12/18/2001.HYUNDAI DESIGNED THE SUBJECT VEHICLES (UNDER SAFETY RECALL 08V-532) SUCH THAT THE AIR BAG CONTROL MODULE CONNECTOR IS LOCATED DIRECTLY BELOW THE CENTER CONSOLE CUP HOLDERS.SPILLAGE OF LIQUID FROM CUPS PLACED IN THE CUP HOLDERS MAY CONTAMINATE THE CONTROL MODULE AND THE CONNECTOR AND PREVENT PROPER DEPLOYMENT OF THE AIR BAGS.IN ADDITION, IN THE SUBJECT VEHICLES UNDER SAFETY RECALL 08V-533, HYUNDAI LOCATED A WIRING HARNESS FOR THE SIDE IMPACT AIR BAGS UNDER EACH FRONT SEAT.MOVEMENT OF THE SEAT OR PLACEMENT OF OBJECTS UNDER THE SEAT MAY DISTURB THE ELECTRICAL CONNECTION IN THE SIDE IMPACT AIR BAG WIRING CIRCUIT.FOR EACH OF THE ABOVE DESCRIBED CONDITIONS, THE AIR BAG WARNING LIGHT WILL ILLUMINATE WHEN THE VEHICLE DIAGNOSTIC SYSTEM DETECTS A FAULT.THIS INVESTIGATION IDENTIFIED SEVERAL CRASH REPORTS (TWO FATAL AND 17 CRASH REPORTS RESULTING IN NINE INJURY REPORTS) THAT INCLUDED ALLEGATIONS OF PRIOR AIR BAG WARNING LIGHT ILLUMINATION AND NON-DEPLOYMENT OF THE AIR BAGS, WHICH ARE NOT INCLUDED IN THE FAILURE REPORT SUMMARY.THIS ENGINEERING ANALYSIS IS CLOSED (SEE RECALLS 08V-532 & 08V533).
PE08017 · Air Bag Light Illumination
Opened Mar 10, 2008 · Closed Jul 10, 2008
Status: closed (inferred from source dates) · Air Bags; Air Bags:frontal; Air Bags:frontal:sensor/control MODULE-INACTIVE
IN CERTAIN MODEL YEAR (MY) 2001 AND 2002 VEHICLES, THE AIR BAG SYSTEM IS SUSCEPTIBLE TO AIR BAG LIGHT ILLUMINATION AND AIR BAG NON-DEPLOYMENT OR INADVERTENT DEPLOYMENT FROM LIQUID CONTAMINATION OF THE AIR BAG CONTROL MODULE.THE CONTROL MODULE IS LOCATED BENEATH AND NEAR CENTER CONSOLE CUP HOLDERS.ODI IS ALSO AWARE OF COMPLAINTS REGARDING AIR BAG LIGHT ILLUMINATION DUE TO LOSS OF PROPER AIR BAG ELECTRICAL INTEGRITY IN WIRING AND CONNECTIONS LOCATED UNDER THE FRONT SEATS.UNDER INVESTIGATION PE08-017, HYUNDAI PROVIDED 472 OWNER REPORTS AND 9,108 WARRANTY CLAIMS RELATED TO THESE ISSUES FOR MY 2001 AND 2002 VEHICLES BUILT THROUGH 12/14/2001.ODI IS ALSO AWARE OF SIX INCIDENTS OF SEAT BELT PRETENSIONER/AIR BAG INADVERTENT DEPLOYMENTS DUE TO LIQUID SPILLS.TO ADDRESS THE ABOVE ISSUES, ON 04/25/2001, HYUNDAI ADDED A CARPET COVER/SHIELD OVER THE AIR BAG CONTROL MODULE CONNECTOR AREA AND UPGRADED THE CABLE ROUTING AND ATTACHMENT POINTS TO IMPROVE THE ELECTRICAL CONNECTIONS ON VEHICLES BUILT AFTER 12/14/2008.THIS PRELIMINARY EVALUATION IS BEING UPGRADED TO AN ENGINEERING ANALYSIS (EA08-012) FOR FURTHER INVESTIGATION OF CERTAIN MY 2001-2002 SUBJECT VEHICLES BUILT THROUGH 12/14/2002.
Additional source detail variants (3)
Air Bags:frontal
IN CERTAIN MODEL YEAR (MY) 2001 AND 2002 VEHICLES, THE AIR BAG SYSTEM IS SUSCEPTIBLE TO AIR BAG LIGHT ILLUMINATION AND AIR BAG NON-DEPLOYMENT OR INADVERTENT DEPLOYMENT FROM LIQUID CONTAMINATION OF THE AIR BAG CONTROL MODULE.THE CONTROL MODULE IS LOCATED BENEATH AND NEAR CENTER CONSOLE CUP HOLDERS.ODI IS ALSO AWARE OF COMPLAINTS REGARDING AIR BAG LIGHT ILLUMINATION DUE TO LOSS OF PROPER AIR BAG ELECTRICAL INTEGRITY IN WIRING AND CONNECTIONS LOCATED UNDER THE FRONT SEATS.UNDER INVESTIGATION PE08-017, HYUNDAI PROVIDED 472 OWNER REPORTS AND 9,108 WARRANTY CLAIMS RELATED TO THESE ISSUES FOR MY 2001 AND 2002 VEHICLES BUILT THROUGH 12/14/2001.ODI IS ALSO AWARE OF SIX INCIDENTS OF SEAT BELT PRETENSIONER/AIR BAG INADVERTENT DEPLOYMENTS DUE TO LIQUID SPILLS.TO ADDRESS THE ABOVE ISSUES, ON 04/25/2001, HYUNDAI ADDED A CARPET COVER/SHIELD OVER THE AIR BAG CONTROL MODULE CONNECTOR AREA AND UPGRADED THE CABLE ROUTING AND ATTACHMENT POINTS TO IMPROVE THE ELECTRICAL CONNECTIONS ON VEHICLES BUILT AFTER 12/14/2008.THIS PRELIMINARY EVALUATION IS BEING UPGRADED TO AN ENGINEERING ANALYSIS (EA08-012) FOR FURTHER INVESTIGATION OF CERTAIN MY 2001-2002 SUBJECT VEHICLES BUILT THROUGH 12/14/2002.
Air Bags:frontal:sensor/control MODULE-INACTIVE
IN CERTAIN MODEL YEAR (MY) 2001 AND 2002 VEHICLES, THE AIR BAG SYSTEM IS SUSCEPTIBLE TO AIR BAG LIGHT ILLUMINATION AND AIR BAG NON-DEPLOYMENT OR INADVERTENT DEPLOYMENT FROM LIQUID CONTAMINATION OF THE AIR BAG CONTROL MODULE.THE CONTROL MODULE IS LOCATED BENEATH AND NEAR CENTER CONSOLE CUP HOLDERS.ODI IS ALSO AWARE OF COMPLAINTS REGARDING AIR BAG LIGHT ILLUMINATION DUE TO LOSS OF PROPER AIR BAG ELECTRICAL INTEGRITY IN WIRING AND CONNECTIONS LOCATED UNDER THE FRONT SEATS.UNDER INVESTIGATION PE08-017, HYUNDAI PROVIDED 472 OWNER REPORTS AND 9,108 WARRANTY CLAIMS RELATED TO THESE ISSUES FOR MY 2001 AND 2002 VEHICLES BUILT THROUGH 12/14/2001.ODI IS ALSO AWARE OF SIX INCIDENTS OF SEAT BELT PRETENSIONER/AIR BAG INADVERTENT DEPLOYMENTS DUE TO LIQUID SPILLS.TO ADDRESS THE ABOVE ISSUES, ON 04/25/2001, HYUNDAI ADDED A CARPET COVER/SHIELD OVER THE AIR BAG CONTROL MODULE CONNECTOR AREA AND UPGRADED THE CABLE ROUTING AND ATTACHMENT POINTS TO IMPROVE THE ELECTRICAL CONNECTIONS ON VEHICLES BUILT AFTER 12/14/2008.THIS PRELIMINARY EVALUATION IS BEING UPGRADED TO AN ENGINEERING ANALYSIS (EA08-012) FOR FURTHER INVESTIGATION OF CERTAIN MY 2001-2002 SUBJECT VEHICLES BUILT THROUGH 12/14/2002.
Air Bags
IN CERTAIN MODEL YEAR (MY) 2001 AND 2002 VEHICLES, THE AIR BAG SYSTEM IS SUSCEPTIBLE TO AIR BAG LIGHT ILLUMINATION AND AIR BAG NON-DEPLOYMENT OR INADVERTENT DEPLOYMENT FROM LIQUID CONTAMINATION OF THE AIR BAG CONTROL MODULE.THE CONTROL MODULE IS LOCATED BENEATH AND NEAR CENTER CONSOLE CUP HOLDERS.ODI IS ALSO AWARE OF COMPLAINTS REGARDING AIR BAG LIGHT ILLUMINATION DUE TO LOSS OF PROPER AIR BAG ELECTRICAL INTEGRITY IN WIRING AND CONNECTIONS LOCATED UNDER THE FRONT SEATS.UNDER INVESTIGATION PE08-017, HYUNDAI PROVIDED 472 OWNER REPORTS AND 9,108 WARRANTY CLAIMS RELATED TO THESE ISSUES FOR MY 2001 AND 2002 VEHICLES BUILT THROUGH 12/14/2001.ODI IS ALSO AWARE OF SIX INCIDENTS OF SEAT BELT PRETENSIONER/AIR BAG INADVERTENT DEPLOYMENTS DUE TO LIQUID SPILLS.TO ADDRESS THE ABOVE ISSUES, ON 04/25/2001, HYUNDAI ADDED A CARPET COVER/SHIELD OVER THE AIR BAG CONTROL MODULE CONNECTOR AREA AND UPGRADED THE CABLE ROUTING AND ATTACHMENT POINTS TO IMPROVE THE ELECTRICAL CONNECTIONS ON VEHICLES BUILT AFTER 12/14/2008.THIS PRELIMINARY EVALUATION IS BEING UPGRADED TO AN ENGINEERING ANALYSIS (EA08-012) FOR FURTHER INVESTIGATION OF CERTAIN MY 2001-2002 SUBJECT VEHICLES BUILT THROUGH 12/14/2002.