Counts are not failure probabilities and are not adjusted for sales, age, mileage exposure or reporting. One report may name several categories. Comparison method and limitations.
THIS CONCERNS AN ONGOING SAFETY RECALL FOR REAR BRAKE LOCKUP ON GL1800 GOLDWING. I OWN A 2002 MODEL. THREE TIMES IN THE LAST MONTH, MY REAR BRAKE HAS LOCKED UP, ONE TIME CAUSING ME TO LOOSE CONTROL AND DROP THE BIKE, BEING SLIGHTLY INJURED, WITH A SCRAPE TO THE RIGHT ARM. HONDA HAS THUS FAR NOT REIMBURSED ME FOR REPAIRS THAT IS…
Read full complaint
THIS CONCERNS AN ONGOING SAFETY RECALL FOR REAR BRAKE LOCKUP ON GL1800 GOLDWING. I OWN A 2002 MODEL. THREE TIMES IN THE LAST MONTH, MY REAR BRAKE HAS LOCKED UP, ONE TIME CAUSING ME TO LOOSE CONTROL AND DROP THE BIKE, BEING SLIGHTLY INJURED, WITH A SCRAPE TO THE RIGHT ARM. HONDA HAS THUS FAR NOT REIMBURSED ME FOR REPAIRS THAT IS SUPPOSED TO BE AN UNENDING SAFETY RECALL. DEALER SAID I HAD TO PAY, SINCE HONDA HAS ALLEGEDLY DONE THE RECALL, CLAIMING FLUID CONTAMINATION, EVEN THOUGH THEIR OWN DEALER HAS FLUSHED AND BLED THE SYSTEM TWICE IN THE LAST MONTH. TWICE, THIS HAS HAPPENED WHILE RIDING IN FORWARD MOTION, ONCE REAR BRAKE LOCKED UP AFTER PARKING BIKE IN DEALER'S LOT, SO THIS CAN HAPPEN AT ANY TIME, WITHOUT WARNING. THE NHTSA IS SUPPOSED TO BE THE WATCHDOG OVER THESE ISSUES, AND IS AWARE OF THIS RECALL, WHEN ARE WE GOING TO GET THIS RESOLVED? HOW MANY 1800 GOLDWING OWNERS WILL BE INJURED, POSSIBLY KILLED BEFORE THIS IS FIXED. HONDA HAS KNOWN THIS FOR AT LEAST 8 YEARS, AND THERE IS BIKES WITH RE-OCCURRING PROBLEMS, EVEN AFTER RECALL IS PREFORMED, APPARENTLY, THEIR "FIX" IS NOT WORKING. HELP!
NHTSA ODI #11206622
46,000 miles · Jul 24, 2017
Service Brakes
FOLLOWING BRAKE RECALL REPAIR COMPLETED IN LATE 2016 BY HONDA DEALER, MOTORCYCLE HAS EXPERIENCED SAME FAILURE OF REAR CALIPER/BRAKES HYDRAULICALLY SEIZING TO A COMPLETE STOP OF BIKE. THE HONDA RECALL(S) (2 RECALLS) IS STILL NOT ADEQUATE TO FIX THE PROBLEM WITH THE SECONDARY MASTER CYLINDER AND REAR BRAKES WITH GOLDWINGS.
American Honda Motor Co., Inc. (Honda) is recalling certain model year 2001-2010 and 2012-2015 GL1800, 2001-2005 GL1800A and 2013-2015 GL1800B motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released.
Consequence & remedy
Consequence: A rear brake that drags may increase the risk of a vehicle crash. Additionally, extended riding with the rear brake dragging could generate enough heat to result in a fire.
Remedy: Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on December 7, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JV6. Note: This recall supercedes recall 14V-472.
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.
Consequence & remedy
Consequence: THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT AND, IF NECESSARY, REINFORCE THE WELDS ON 2001-2002 MOTORCYCLES FREE OF CHARGE. ON 2003-2004 MOTORCYCLES, THE UNITS WILL BE REPAIRED, NO INSPECTION WILL BE NECESSARY. THE RECALL BEGAN ON FEBRUARY 9, 2005. OWNERS MAY CONTACT HONDA AT 1-866-784-1870.
CERTAIN MOTORCYCLES EQUIPPED WITH COMBINED-BRAKE SYSTEMS HAVE A PROPORTIONING CONTROL VALVE (PCV) THAT MECHANICALLY PROPORTIONS BRAKE FORCE WHEN THE REAR BRAKE IS APPLIED. A SEAL IN SOME PCVS IS IMPROPERLY SHAPED, AND BRAKE FLUID LEAKAGE MAY OCCUR.
Consequence & remedy
Consequence: IF THE MOTORCYCLE CONTINUES TO BE USED AFTER A LEAK OCCURS, THE REAR BRAKE WOULD EVENTUALLY BECOME INOPERATIVE. A LOSS OF REAR BRAKE FORCE COULD INCREASE THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT THE REAR BRAKE FORLEAKAGE. IF LEAKAGE IS CONFIRMED, THE DEALER WILL REPLACE THE PCV FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 31, 2005. OWNERS MAY CONTACT HONDA AT 866-784-1870.
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.
Consequence & remedy
Consequence: THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT AND REINFORCE THE WELDS ON ALL FRAMES. OWNER NOTIFICATION BEGAN DURING OCTOBER 2003. OWNERS SHOULD CONTACT HONDA AT 1-866-784-1870.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Defect investigations
0
No exact-year investigations in this snapshot.
An investigation is not a finding of a defect, and closure does not prove a vehicle is problem-free.
Illustration