TRANSMISSION MALFUNCTIONS. YH
1998 Home And Park Roadtrek
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
Counts are not adjusted for sales, age, mileage exposure or reporting. A lower count does not establish that a car is problem-free.
About this comparison →Model-year median: 0
2Recall campaignsView recall details →
0InvestigationsView investigation details →
Check a VIN with NHTSA ↗ Model-level counts do not show whether a particular VIN is affected or repaired.
Inspection summary
1998 Home And Park Roadtrek
NHTSA snapshot: September 18, 2026. 4 owner complaints · 2 recall campaigns · 0 investigations.
Counts are not failure probabilities and are not adjusted for sales, age, mileage exposure or reporting. One report may name several categories. Comparison method and limitations.
Top reported categories (up to 5)
- Tires: 2 reports
- Fuel System, Gasoline: 1 reports
- Power Train: 1 reports
Full reported-category list and vehicle report
Recall links
- 99V335000 — Fuel System, Gasoline:storage:tank Assembly:filler Pipe And Cap
- 98V136000 — Fuel System, Gasoline:storage:tank Assembly:filler Pipe And Cap
Check a VIN with NHTSA. Model-level history does not establish whether a particular VIN is affected or repaired.
Print the top reported categories, recall links, snapshot date and comparison limits.
How this year compares
Owner complaints by model year
Compare all Roadtrek years →Counts vary with age, sales, mileage exposure and reporting. They are not failure rates.
What owners reported most
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 4 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Tires. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Fuel System, Gasoline. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Power Train. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
Power Train complaints
1 reportsRecall campaigns
299V335000 · Fuel System, Gasoline:storage:tank Assembly:filler Pipe And Cap
Nov 26, 1999
VEHICLE DESCRIPTION: CLASS B MOTOR HOMES BUILT ON DODGE 3500 OR 2500 VAN CHASSIS. THE GENERATOR FUEL PICKUP FITTING WAS SELF TAPPED INTO A DRILLED HOLE BESIDE THE FUEL SENDING UNIT ON TOP OF THE PLASTIC FUEL TANK. SEALANT WAS USED ON THE THREAD BEFORE THE FITTING WAS SCREWED INTO THE TANK. ON SOME VEHICLES, THE FUEL PICKUP FITTING WAS NOT SEALED PROPERLY AGAINST THE TANK WALL, AND WHEN THE TANK IS FULL, FUEL OR FUEL VAPORS CAN LEAK OUT.
Consequence & remedy
Consequence: IN A CRASH, FUEL OR FUEL VAPORS CAN LEAK WHEN THE TANK IS FULL, INCREASING THE RISK OF A FIRE.
Remedy: DEALERS WILL REPLACE THE SELF TAPPING FUEL PICKUP WITH A NEW ONE WITH REGULAR THREAD FITTING SECURED TO THE TANK WITH A LOCK NUT INSIDE THE TANK.
98V136000 · Fuel System, Gasoline:storage:tank Assembly:filler Pipe And Cap
Jun 22, 1998
VEHICLE DESCRIPTION: CLASS 'B' MOTOR HOMES BUILT ON DODGE 1500, 2500 AND 3500 VAN CHASSIS. THE FUELVENT HOSE FROM THE FUEL TANK TO THE FUEL FILL ENTRY MAY NOT BE VAPOR TIGHT DUE TO OVER TIGHTENING OF THE GEAR CLAMP AT THE CONNECTION OF THE PLASTIC VENT TANK OUTAGE TO THE RUBBER VENT HOSE. THIS CAN RESULT IN FUEL OR FUEL VAPOR LEAKING.
Consequence & remedy
Consequence: THIS CONDITION CAN CAUSE FUEL OR FUEL VAPOR LEAKING RESULTING IN A POTENTIAL FIRE HAZARD. ALSO THE ENGINE COULD STALL FROM LACK OF FUEL, RESULTING IN LOSS OF POWER BRAKING AND POWER STEERING CONTROL.
Remedy: DEALERS WILL REMOVE THE GEAR CLAMP SECURING THE RUBBER VENT HOSE TO THE PLASTIC VENT TUBE, INSTALL A RIGID INSERT TUBE INTO THE PLASTIC VENT TUBE, AND REATTACH THE HOSE AND CLAMP. THE RIBERGLASS COVER IN THE RUNNING BOARD STORAGE COMPARTMENT MUST FIRST BE REMOVED FOR ACCESS.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Defect investigations
0No exact-year investigations in this snapshot.
An investigation is not a finding of a defect, and closure does not prove a vehicle is problem-free.
Illustration