2020 GMC Yukon Xl

My family drove from [XXX] to [XXX]. Upon arrival check engine light came on, we proceeded to a local shop, by the time we arrive check engine light was flashing and engine was knocking and was clearly malfunctioning. Shop owner recommended we transport the vehicle back home as service shops in the area were experiencing high volume and parts shortages. We had vehicle towed to a local shop in [XXX]. The engine is giving diagnostic codes P0300, P050D, [XXX] with internal knocking and tapping. Vehicle has been kept current on all oil changes and has no external leaks. GMC wants at least $12,000 to replace the engine. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The engine light came on and started making noise. We drove it to a mechanic shop, and they said the code stated camshaft and other component issues, but the engine ended up failing completely and was rebuilt. We initially checked for recalls and our VIN did not show any; however, we recently became aware that our engine (6.2L) might be part of the ongoing current problems associated with a recall. We are hoping that GMC will cover any remaining repairs and/or reimburse us for the thousands it has cost us.

Engine started with a rough idle, I attributed this to mileage. Check engine light did not come on until days before scheduling service. Per diagnostic from Chevrolet service department: Lifter roller damaged and camshaft damaged on lobe. need to replace camshaft and lifters. this has been diagnosed by Chevrolet dealer mechanics at Ferman Chevrolet North Tampa, in Tampa Florida. Check Engine Light came on 4 days before I took it for diagnostic. Chevrolet and GMC have issued a recall on 2021+ but this remains outside that recall. I'm quoted for an $11,343 repair on a vehicle that has gotten regular synthetic oil changes at the dealership since I bought it with approx 80k miles on it. Metal was not noticed in the prior oil changes, latest which was

The contact owns a 2020 GMC Yukon XL. The contact stated that while driving at 35 MPH, there was an abnormally loud ticking sound coming from the vehicle. The driver was able to pull over safely. There were no warning lights illuminated. The vehicle was towed to an independent mechanic who determined that the lifter was stuck in the bore, and there was a misfire in cylinder #7 due to a stuck camshaft. The local dealer was not contacted. The manufacturer was not notified of the failure. The failure mileage was approximately 113,997.

My 2020 GMC Yukon XL Denali 6.2L with 59,000 miles developed a ticking noise and slight power loss diagnosed by three different garages as a "collapsed lifter" on #4 cylinder. It's one of the AFM/DoD cylinders that shuts down to save fuel. $8,000 repair estimate, or $12,000 if the failed lifter damaged the camshaft. All three garages said "we see a lot of these." Internet forums are loaded with lifter problems on this engine: specifically AFM/DoD lifters. Safety is not affected. Noise/diagnosis reproduced by three independent garages. Has not been inspected by mfg, police, or insurance rep. No warning lamps or messages, no ODB2 "codes" found by garages. Seven months ago the water pump exploded on Interstate 70, putting us at serious risk. Now this lifter trouble at 59,000 miles. Both should have been covered by the 60,000 mile powertrain warranty, but I'm beyond the 5-year limit.

Complete engine failure while driving on I25 in New Mexico, lost all power was able to roll into a airport parking lot. If I had not been close to the off ramp it could have been catastrophic with the truck traffic on the Interstate. The vehicle has completed all of its normal maintenance on time, and as of January 30, 2026 had a complete review from GMC that everything was in great shape including the engine. There was never a warning light, a maintenance message or any other indication.

Knocking noise from engine-no check engine light initially. Next time it was started knocking was still present and the check engine light was on. Contacted Champion Chevrolet in LaGrange KY. Dealership diagnosed problem (Code P0308 - Cylinder 8 misfire). Compression test on Cylinder 8 failed. Removed valve cover and confirmed loud tick in the rocker shaft and worn camshaft lobes. Was told I would need a new engine and that repairing the existing engine was not cost effective. So, $22,722.14 later, i have a new engine in my 2020 GMC Yukon and have the original engine (core charge) in my shop in case it is needed for evaluation to help determine if the GM recall should be expanded to 2020 model year (and others not covered by the current recall).

This concerns a 2020 GMC Yukon XL Denali motor (6.2L gas) 118,000 miles. Regular maintenance performed every 5 K miles and per request of original dealer. Beginning 2 weeks ago a new regular pinging developed and the vehicle was taken to the dealer (at which time new tires were installed routinely). No clear issues were found upon brief inspection/auscultation and advised to return if the sound was recurrent. The sound persisted on a fairly frequent though intermittent basis. A recording was made and another appt made for routine spark plug replacement. Upon return and repeat inspection it was discovered that oil filter was full of metal shavings and advised it was very likely necessary for a complete engine overhaul (with $18-20 K price tag). Checking online it was discovered that this GM motor had a 580,000 vehicle recall for 2021-2024 models. A new ODI study is being done for similar complaints for 2019-2021 year models (additional 280,000 vehicles). The 6.2L motors have been found to have a crankshaft/bearing issue leading to motor failure and even sudden loss of power often presenting with metal particulate matter being discovered. Awaiting resolution.

Complete Engine Failure at 83,986 miles and no prior signs that it was defective. Had GM initially look at it and they refused to cover the repair and indicated that it was due to faulty lifters. Took it to an independent shop, they tore it all down and indicated the lifters had trays that were not tight, which allowed the lifters to eat away at the camshaft. Due to that, metal shavings got into the main engine bearings and that is what ultimately caused the engine failure. While questioning how a new engine would be any more reliable than the one that failed, I was told that all engine suppliers were aware of the sloppy lifter play and the needed cam changes and new parts were all maid to a tighter spec so that this would not happen in the future. GM is fully aware of this issue and fortunately for me it did not result in my engine failing on the highway like others have. I was left with a $14,969.74 repair bill on something that should have never happened. I talked with current GM master technicians, and they indicated to me to stay away from anything pre 2025 because all engines were made to the same spec and they don't know why a change was not made sooner.