IllustrationRECALLED IN MAY 2016 HAS NOT BEEN FIXED BY GM BECAUSE OF NO PARTS AVAILABLE TO REPAIR
2011 GMC Sierra 3500
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Sierra 3500 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 10 of 20 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Fuel/propulsion System. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports1 fire reports0 injury reports
What owners actually said
20 reportsTAKATA RECALL - WE RECEIVED NOTIFICATION OF THE RECALL BUT HAVE YET BEEN CONTACTED OR ABLE TO HAVE THE BAGS REPLACED. HEARING OF MULTIPLE DEATHS, IS MY CAR SAFE TO DRIVE?
CRACKED DASHBOARD LOCATED BY AIRBAG
TAKATA RECALL - 5/27/2016 NO REMEDY AVAILABLE AS OF YET. HOW DO I GET THIS RESOLVED?
THE DASH HAS CRACKED IN A NUMBER OF PLACES. MY FEAR IS THAT IF THE AIRBAG DEPLOYS THAT SHARDS OF PLASTIC COULD BECOME AIRBORNE AND THE PROJECTILES COULD INJURE MYSELF OR MY PASSENGERS. SOME OF THE CRACKS ARE AT THE AIRBAG LOCATION. I HAVE CHECKED ONLINE AND THIS IS A MAJOR PROBLEM ON THESE VEHICLES AND GM WILL NOT ADDRESS IT. TH…
Read full complaint
THE DASH HAS CRACKED IN A NUMBER OF PLACES. MY FEAR IS THAT IF THE AIRBAG DEPLOYS THAT SHARDS OF PLASTIC COULD BECOME AIRBORNE AND THE PROJECTILES COULD INJURE MYSELF OR MY PASSENGERS. SOME OF THE CRACKS ARE AT THE AIRBAG LOCATION. I HAVE CHECKED ONLINE AND THIS IS A MAJOR PROBLEM ON THESE VEHICLES AND GM WILL NOT ADDRESS IT. THERE IS A FACEBOOK PAGE DEDICATED TO IT WITH MANY MANY MEMBERS.
BAD TIRES ALL WAY AROUND. AND THE OTHER COMPANY TRUCKS I USE HAS BAD BRAKES AND A LOT OF OTHER USDOT INSPECTION WOULD FAIL. I AM CERTIFIED DOT DRIVER AND I AM SCARED THIS COMPANY IS PUTTING COMPANY PROFITS ABOVE HUMAN LIFE
TL* THE CONTACT OWNS A 2011 GMC SIERRA 3500. EVERY TIME THE VEHICLE WAS STARTED, THE AIR BAG WARNING INDICATOR FOR BOTH THE DRIVER AND PASSENGER SIDES ILLUMINATED. THE DEALER DIAGNOSED THAT THE SENSOR ON BOTH SIDES FAILED. THE VEHICLE WAS REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE AIR BAG WARNING INDICATOR ILLUM…
Read full complaint
TL* THE CONTACT OWNS A 2011 GMC SIERRA 3500. EVERY TIME THE VEHICLE WAS STARTED, THE AIR BAG WARNING INDICATOR FOR BOTH THE DRIVER AND PASSENGER SIDES ILLUMINATED. THE DEALER DIAGNOSED THAT THE SENSOR ON BOTH SIDES FAILED. THE VEHICLE WAS REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE AIR BAG WARNING INDICATOR ILLUMINATED AGAIN. THE VEHICLE WAS NOT REPAIRED AGAIN. THE APPROXIMATE FAILURE MILEAGE WAS 57,000. UPDATED 07/22/16*LJ THE CONSUMER STATED THE MANUFACTURER OFFRERDTO SPILT THE COST OF THE REPAIRS. UPDATED 10/19/2017*JS
WHILE DRIVING UP HILL THE TRUCK JUST SHUT OFF. COULD NOT START IT AGAIN. THERE WAS NO WARNING SIGNS IT TOOK OVER 2 WEEKS AND 2 DIFFERENT GM DEALERS TO FIGURE OUT IT WAS A FUEL INJECTOR PUMP THAT EXPLODED. THERE WERE NO CODES ON THE TRUCKS COMPUTER TO ACKNOWLEDGE THERE WAS ANY PROBLEM WITH THE TRUCK EVEN AFTER IT WOU…
Read full complaint
WHILE DRIVING UP HILL THE TRUCK JUST SHUT OFF. COULD NOT START IT AGAIN. THERE WAS NO WARNING SIGNS IT TOOK OVER 2 WEEKS AND 2 DIFFERENT GM DEALERS TO FIGURE OUT IT WAS A FUEL INJECTOR PUMP THAT EXPLODED. THERE WERE NO CODES ON THE TRUCKS COMPUTER TO ACKNOWLEDGE THERE WAS ANY PROBLEM WITH THE TRUCK EVEN AFTER IT WOULD NOT START. COULD HAVE BEEN EXTREMELY DANGEROUS IF OUR CIRCUMSTANCE WE'RE DIDFERENT. 5 MILES EARLIER AND WE WOULD HAVE BEEN ON AN EXPRESS WAY.
VEHICLE WAS TRAVELING DOWN ACCESS ROAD COMING UP TO INTERSTATE OFFRAMP. RIGHT BEFORE YIELD SIGN BOSCH CP4 PUMP FAILED STOPPING MOTOR. BRAKES AND STEERING AFFECTED. JUST ENOUGH MOMENTUM TO FIGHT TRUCK INTO ADJACENT PARKING LOT RIGHT AFTER RAMP. *TR
WHILE DRIVING A GMC 3500 DENALI HD 4X4 EQUIPPED WITH THE DIESEL ENGINE AND AUTOMATIC TRANSMISSION, WITH LESS THAN 90 MILES ON IT, THE REAR ADJUSTMENT BRACKET FOR THE LEFT SIDE TORSION BAR BROKE AND FELL OFF THE VEHICLE WHILE GOING OVER A SPEED BUMP AT LESS THAN 20MPH. MORE SPECIFICALLY, THE PART MOUNTS NEAR OR IN THE CROSSMEMBE…
Read full complaint
WHILE DRIVING A GMC 3500 DENALI HD 4X4 EQUIPPED WITH THE DIESEL ENGINE AND AUTOMATIC TRANSMISSION, WITH LESS THAN 90 MILES ON IT, THE REAR ADJUSTMENT BRACKET FOR THE LEFT SIDE TORSION BAR BROKE AND FELL OFF THE VEHICLE WHILE GOING OVER A SPEED BUMP AT LESS THAN 20MPH. MORE SPECIFICALLY, THE PART MOUNTS NEAR OR IN THE CROSSMEMBER BRACE AND IS USED TO ADJUST THE PRELOAD ON THE TORSION BAR. AFTER THE PART BROKE AND FELL OFF THE VEHICLE HAD A NOTICEABLE LIST TO THE LEFT SIDE. THE PART IS A CAST PART THAT APPEARS TO HAVE FAILED IN OVERLOAD (UNDERDESIGNED) OR DUE TO HIGH STRESS CONCENTRATIONS (POOR FIT/TOLERANCE ISSUES). AT CITY SPEEDS I WOULDN'T EXPECT MUCH MORE THAN WHAT HAPPENED TO ME. HOWEVER, AT HIGHWAY SPEEDS WITH A LOADED TRUCK OR TOWING A TRAILER, THE FAILURE COULD RESULT IN CONTROL ISSUES AND THEREFORE, IN MY OPINION, SHOULD BE CLASSIFIED AS A SAFETY ISSUE. THE DEALER TOOK THE VEHICLE BACK AND HAD A NON-GMC FACILITY "REBUILD" THE FRONT SUSPENSION. ACCORDING TO THE DEALER, GMC HAS HAD AT LEAST ONE OTHER SIMILAR INCIDENT. I CURRENTLY HAVE THE BROKEN PART AND POSSIBLY THE ORIGINAL PART FROM THE RIGHT HAND SIDE OF THE VEHICLE. *LN
Official recalls
521V050000 · Air Bags:frontal:passenger Side:inflator Module
Feb 5, 2021
General Motors, LLC (GM) is recalling certain 2007-2011 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL, and 2009-2011 Chevrolet Silverado 2500, Silverado 3500, GMC Sierra 2500 and Sierra 3500 vehicles originally sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, GM is recalling certain 2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL vehicles originally sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 22, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on March 1, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328760.
21V054000 · Air Bags:frontal:passenger Side:inflator Module
Feb 5, 2021
General Motors, LLC (GM) is recalling certain 2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally GM is recalling certain 2011-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, Yukon XL and 2011-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." Additionally, GM is recalling certain 2010-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL and 2010-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 25, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed to 40 VIN owners on May 11, 2021. A second owner notification letter was mailed to all other owners on January 24, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328800.
18V267000 · Equipment
Apr 26, 2018
General Motors LLC (GM) is recalling certain 2009-2014 Chevrolet Silverado HD and GMC Sierra HD, 2009 GMC Topkick 5000, 6000, 7000 and 8000 Series and Isuzu F Series, and 2009-2018 Chevrolet Express, and GMC Savana vehicles, equipped with certain Plastic-Handle Fire Extinguishers or Push Button 'Pindicator' Fire Extinguishers. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
Remedy: GM will notify owners, instructing them to contact Kidde to get a replacement fire extinguisher, free of charge. The recall began June 11, 2018. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Isuzu customer service at 1-866-441-9638. GM's number for this recall is 18146.
17V664000 · Fuel System, Gasoline:storage:auxillary Tank
Oct 19, 2017
General Motors LLC (GM) is recalling certain 2011-2015 Chevrolet Silverado 3500 and GMC Sierra 3500 trucks equipped with dual fuel tanks. The low fuel level sensor for the front tank may stick causing the rear tank to overfill the front tank.
Consequence & remedy
Consequence: If the front tank overfills, the excess pressure may cause the front tank to expand and contact the driveshaft, possibly resulting in a hole in the tank. The hole will leak fuel, which in the presence of an ignition source, can increase the risk of a fire.
Remedy: GM has notified owners, and dealers will replace the rear tank fuel pump or update the fuel-level sensor software, as well as inspect the front tank, replacing it as necessary, free of charge. The recall began December 11, 2017. Owners may contact GM customer service for Chevrolet 1-800-222-1020 or for GMC customer service at 1-800-462-8782. GM's number for this recall is 17399.
14V407000 · Electrical System
Jul 2, 2014
General Motors LLC (GM) is recalling certain model year 2007-2011 Chevrolet Silverado HD 2500/3500 trucks manufactured January 18, 2007, to June 22, 2011, and GMC Sierra HD 2500/3500 trucks manufactured January 22, 2007, to June 21, 2011, and equipped with an auxiliary battery. Owners may unknowingly draw too much current through the vehicle's trailer harness resulting in the melting of fusible link for the auxiliary battery.
Consequence & remedy
Consequence: If the fusible link melts it may come into contact with adjacent components, damage the electrical center cover, the nearby wiring harness conduit and other vehicle components, increasing the risk of a fire.
Remedy: GM will notify owners and dealers will replace the jumper harness with one that includes a 40 amp inline fuse, and provide the owner with supplemental Owner Manual information, free of charge. The recall began on August 29, 2014. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-800-462-8782. GM's number for this recall is 14260.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.