← New search

2021 Ford Mustang Mach E

Owner reports · Recalls · Investigations

More warning signs than most Mustang Mach E years

Owner complaints for the 2021 Ford Mustang Mach E are substantially higher than the model-year median of 82.5.

About this comparison →

When problems were reported

Mileage at the reported incident

Limited mileage data: 33 of 343 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Electrical System. Review the 151 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Forward Collision Avoidance. Review the 104 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Power Train. Review the 50 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

14 crash reports1 fire reports6 injury reports

Unknown Or Other complaints

50 reports
Clear category filter
Mileage unknown · Aug 9, 2026
Electrical SystemUnknown Or Other

While merging onto the freeway and accelerating, the center touchscreen detached from its mount. The screen has two components: a rear housing fixed to the dash and a glass front panel that sits on top of it — the glass panel came loose on its own; I have never attempted to remove or pry it. The panel remained connected only by …

Read full complaint

While merging onto the freeway and accelerating, the center touchscreen detached from its mount. The screen has two components: a rear housing fixed to the dash and a glass front panel that sits on top of it — the glass panel came loose on its own; I have never attempted to remove or pry it. The panel remained connected only by internal wiring and hung loose from the dash while the vehicle was in motion. This created three distinct safety hazards: (1) the screen was dangling and at risk of fully detaching, (2) the failure occurred during a high-attention driving maneuver (accelerating while merging), and (3) I was forced to catch the glass panel with one hand to prevent it from falling or shattering, then reattach it while still navigating traffic — as the sole occupant of the vehicle. Heavier-than-usual traffic that day gave me a lower-speed window to manage this; at highway speed under normal conditions, this could have been considerably more dangerous. No warning lights or dashboard messages preceded the failure — this is a hardware/mechanical defect, likely related to the internal mounting clips. Since the initial failure, the screen has detached repeatedly during acceleration, occurring frequently over the following days. In subsequent incidents, my boyfriend was a passenger and able to assist in stabilizing the screen. The screen has since stopped functioning entirely, which independently constitutes a safety issue, as it disables the backup camera display and other driver-assist systems that rely on it. The dealer has not yet been able to reproduce the issue. A service appointment has been scheduled and is pending.

NHTSA ODI #11755696

Mileage unknown · Apr 30, 2026
Unknown Or OtherVisibility/wiper

There’s a known recall. “2021 Mach-E models produced between Feb 24, 2020, and July 18, 2021, are at risk of the glass panels detaching or leaking.” But my car, a 2021 model, isn’t on the list. I just discovered that my headliner is stained and there’s a leak.

NHTSA ODI #11734875

Mileage unknown · Feb 19, 2026
Electrical SystemPower TrainUnknown Or Other

Vehicle experienced immediate loss of motive power while in motion at 45 mph after "Stop Safely Now" alert. This is a repeat power failure. The vehicle was in service for 75+ days (Dec-Feb) for this exact defect. The Ford service center said they replaced the “battery controller” yet the issue recurred. The car previously flagg…

Read full complaint

Vehicle experienced immediate loss of motive power while in motion at 45 mph after "Stop Safely Now" alert. This is a repeat power failure. The vehicle was in service for 75+ days (Dec-Feb) for this exact defect. The Ford service center said they replaced the “battery controller” yet the issue recurred. The car previously flagged this alert while in motion 2 times prior (one on the highway going ~65mph and on another major street going roughly ~45 mph). As a Ford Reacquired Vehicle (Buyback), the failure to resolve this catastrophic electrical fault creates an extreme risk of crash and entrapment in traffic, putting myself, my family and the drivers in vicinity at significant safety risk. The car is currently at a different Ford Service Center. They have been able to reproduce the issue and are currently running diagnostics to identify a resolution.

NHTSA ODI #11719257

Mileage unknown · Jan 13, 2026
Unknown Or Other

The spot welds connecting the door at the hinges have failed. The metal is shearing, over 10mm, at multiple of the world locations.

NHTSA ODI #11710605

Mileage unknown · Dec 23, 2025
Unknown Or Other

Ford is unable to perform two safety recalls. The first is over the windshield which can lead to its failure while driving. The second is for the glass roof which can cause a failure while driving. The local dealer in Springfield Illinois says they can not do the work and can not identify anyone locally who will do the work. The…

Read full complaint

Ford is unable to perform two safety recalls. The first is over the windshield which can lead to its failure while driving. The second is for the glass roof which can cause a failure while driving. The local dealer in Springfield Illinois says they can not do the work and can not identify anyone locally who will do the work. The dealership with the Ford autobody repair shop in the next town over in taylorville Illinois says they can not do the work. I called Ford customer service and they just sent me to the taylorville shop that said they can't do the work. The windshield or roof can come off and no one will do the repair including Fords own autobody shop. Help.

NHTSA ODI #11706695

Mileage unknown · Sep 23, 2025
Unknown Or Other

In mid-November 2023, the authorized Ford dealership Hutchinson Ford of Forsyth, located in Forsyth, Georgia, sold and installed four Toyo A23 tires (size 225/55R19 99V) on my 2021 Ford Mustang Mach-E. After approximately 23,000 miles, the tires experienced catastrophic premature wear. Upon investigation, I discovered the deale…

Read full complaint

In mid-November 2023, the authorized Ford dealership Hutchinson Ford of Forsyth, located in Forsyth, Georgia, sold and installed four Toyo A23 tires (size 225/55R19 99V) on my 2021 Ford Mustang Mach-E. After approximately 23,000 miles, the tires experienced catastrophic premature wear. Upon investigation, I discovered the dealership had installed tires with a load index of 99. The manufacturer's required specification for my vehicle is a minimum load index of 103. This incorrect fitment created an 880-pound deficit in the vehicle's total load-carrying capacity, posing a severe and constant risk of tire failure, especially at highway speeds. This is a critical safety issue for a heavy electric vehicle. The dealership's management has acknowledged the danger. When I raised this issue, the service manager stated they were "glad something bad did not happen." Despite this admission of the risk they created, they have refused to correct the safety issue, claiming the premature failure is normal wear as the tires are "nearing end of life." This constitutes a dangerous service practice by an authorized Ford dealer, which knowingly left a customer's vehicle in an unsafe condition. I am filing this complaint to document this safety issue and the dealership's refusal to rectify it.

NHTSA ODI #11689231

Mileage unknown · Jan 20, 2025
Electrical SystemForward Collision AvoidanceUnknown Or Other

The forward collision detection system failed first. Then the car suddenly would not move and gave a pull over immediately warning on the dash and also flashed a battery light. It was 15 degrees outside and my wife and son were stuck in the cold. Not a safe environment. This is inexcusable for a car to be driving fine on min…

Read full complaint

The forward collision detection system failed first. Then the car suddenly would not move and gave a pull over immediately warning on the dash and also flashed a battery light. It was 15 degrees outside and my wife and son were stuck in the cold. Not a safe environment. This is inexcusable for a car to be driving fine on minute and to be completely inoperative the next.

NHTSA ODI #11636992

Mileage unknown · Jan 4, 2025
Electrical SystemUnknown Or Other

The car had an issue with the 12V battery which caused it to be completely disabled and unresponsive to the key fob and phone as a key. My wife had gotten out of the car without knowing this had happened and went to the rear door to let out our infant son, but the door would not open. We called emergency services and roadside as…

Read full complaint

The car had an issue with the 12V battery which caused it to be completely disabled and unresponsive to the key fob and phone as a key. My wife had gotten out of the car without knowing this had happened and went to the rear door to let out our infant son, but the door would not open. We called emergency services and roadside assistance. AAA arrived first and tried to open the lock but were unsuccessful. I had to smash the window to open the door and rescue my son. Emergency services arrived after I had already done this. The only reason I know it was an issue with the 12V battery is because the Ford dealership told me after I had the car towed there for inspection. The only way to open the car in this situation is to use a portable jumper to jump two wires hidden in the bumper which open the Frunk. Then you need to jump the actual battery that is located in the frunk. It does not have a mechanical release for the doors. This supposed fix is highly dangerous as it requires one to have a readily available jumper and the 12V battery needs to be completely drained in this scenario. In my case, this didn’t work even when the Ford technician arrived. The only possible way to get in was to break through a laminated glass window which was incredibly difficult to break even with the correct tool to do it.

NHTSA ODI #11634130

Mileage unknown · Nov 26, 2024
Back Over PreventionUnknown Or Other

The rear camera has malfunctioned. When the vehicle is put into reverse the area usually covered by the rear cameras is blue with white tire tracks indicating the direction the vehicle will travel. Obstructions such as people or other vehicles are covered in blue and not visible on the screen. The dealer has confirmed the prob…

Read full complaint

The rear camera has malfunctioned. When the vehicle is put into reverse the area usually covered by the rear cameras is blue with white tire tracks indicating the direction the vehicle will travel. Obstructions such as people or other vehicles are covered in blue and not visible on the screen. The dealer has confirmed the problem and ordered replacements in May. In the meantime I am hesitant to drive this vehicle since there have been a couple of near misses in crowded parking lots. This vehicle is available for inspection. I have not received any communication from the dealer. With safety at risk something needs to be done

NHTSA ODI #11627541

Mileage unknown · Nov 18, 2024
Unknown Or Other

The backup camera has failed numerous times. The camera will work and then suddenly stop creating a safety risk of hitting a pedestrian walking behind the vehicle when relying on the camera. The dealer has attempted to fix the problem by installing a new camera, new wiring harness, and a new module. The new module installed, und…

Read full complaint

The backup camera has failed numerous times. The camera will work and then suddenly stop creating a safety risk of hitting a pedestrian walking behind the vehicle when relying on the camera. The dealer has attempted to fix the problem by installing a new camera, new wiring harness, and a new module. The new module installed, under warranty, in February 2024 now requires a software update that only the dealer can perform at a cost of $1200. The vehicle warranty expired in July and Ford is not covering the cost of the update despite the module being new and requiring the update to work properly. It seems that if a part on a vehicle requires a software update to function properly that the part was defective and should be recalled. The dealer has inspected and advises to update the software on the module to regain proper function of the backup camera.

NHTSA ODI #11625999

Official recalls

13

26V417000 · Power Train:driveline:differential Unit

Jun 30, 2026

Ford Motor Company (Ford) is recalling certain 2021-2023 Mustang Mach E vehicles. The rear differential pinion shaft may fracture.

Consequence & remedy

Consequence: Differential pinion shaft fracture may result in a loss of drive power, or unintended vehicle movement if the vehicle is in park without the parking brake applied, increasing the risk of a crash.

Remedy: Dealers will repair or replace the rear differential assembly as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed July 13, 2026. Additional letters will be sent once the remedy is available, anticipated in late December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S50.

25V513000 · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module

Aug 8, 2025

Ford Motor Company (Ford) is recalling certain 2021 Mach-E vehicles that were repaired incorrectly under recall 24V777. An Over-The-Air (OTA) update to the Anti-lock Braking System (ABS) may result in a loss of power brake assist, ABS, Electronic Stability Control, Traction Control, and driver assistance features.

Consequence & remedy

Consequence: A loss of power brake assist can increase the distance required to stop the vehicle. Additionally, a disabled antilock brake system and/or stability control system can result in a loss of vehicle control. Either of these scenarios can increase the risk of a crash.

Remedy: Dealers will update the ABS calibration software, free of charge. Owner notification letters were mailed September 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S81.

25V404000 · Electrical System:body Control Module:software; Latches/locks/linkages:doors:latch

Jun 13, 2025

Ford Motor Company (Ford) is recalling certain 2021-2025 Mustang Mach E vehicles. In the event of a low battery charge, the electronic door latches may remain locked once the driver or front passenger exits and shuts the door, possibly trapping someone who is unable to use the inside door release handles, such as a child in the back seat.

Consequence & remedy

Consequence: The inability to enter or exit the vehicle in an emergency increases the risk of injury.

Remedy: Dealers will update the Powertrain Control Module (PCM) and the Secondary On-Board Diagnostic Control Module C (SOBDMC) software, free of charge. Owner notification letters were mailed to 2021-2025 Mustang Mach-E owners September 12, 2025. Additionally, Owner notification letters were mailed to 2024-2025 Mustang Mach-E owners July 10, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S65.

Additional source detail variants (2)

Electrical System:body Control Module:software

Ford Motor Company (Ford) is recalling certain 2021-2025 Mustang Mach E vehicles. In the event of a low battery charge, the electronic door latches may remain locked once the driver or front passenger exits and shuts the door, possibly trapping someone who is unable to use the inside door release handles, such as a child in the back seat.

Consequence: The inability to enter or exit the vehicle in an emergency increases the risk of injury.

Remedy: Dealers will update the Powertrain Control Module (PCM) and the Secondary On-Board Diagnostic Control Module C (SOBDMC) software, free of charge. Owner notification letters were mailed to 2021-2025 Mustang Mach-E owners September 12, 2025. Additionally, Owner notification letters were mailed to 2024-2025 Mustang Mach-E owners July 10, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S65.

Latches/locks/linkages:doors:latch

Ford Motor Company (Ford) is recalling certain 2021-2025 Mustang Mach E vehicles. In the event of a low battery charge, the electronic door latches may remain locked once the driver or front passenger exits and shuts the door, possibly trapping someone who is unable to use the inside door release handles, such as a child in the back seat.

Consequence: The inability to enter or exit the vehicle in an emergency increases the risk of injury.

Remedy: Dealers will update the Powertrain Control Module (PCM) and the Secondary On-Board Diagnostic Control Module C (SOBDMC) software, free of charge. Owner notification letters were mailed to 2021-2025 Mustang Mach-E owners September 12, 2025. Additionally, Owner notification letters were mailed to 2024-2025 Mustang Mach-E owners July 10, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S65.

25V315000 · Back Over Prevention:software

May 9, 2025

Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.

Consequence & remedy

Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.

Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.

25V130000 · Electrical System:propulsion System:traction Battery:management System/energy Control Module (bms/becm):software

Feb 28, 2025

Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles previously repaired incorrectly under recall number 22V-412. The high voltage battery main contactors may overheat.

Consequence & remedy

Consequence: An overheated high voltage battery contactor may cause the vehicle to lose drive power, increasing the risk of a crash.

Remedy: Dealers will update the on-board software, free of charge. Owner notification letters were mailed April 11, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S14.

24V777000 · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module

Oct 18, 2024

Ford Motor Company (Ford) is recalling certain 2021 Mach-E vehicles. An Over-The-Air (OTA) update to the Anti-lock Braking System (ABS) may result in a loss of power brake assist, ABS, Electronic Stability Control, Traction Control, and driver assistance features.

Consequence & remedy

Consequence: A loss of power brake assist can extend the distance required to stop the vehicle. Additionally, a disabled antilock brake system and/or stability control system can result in a loss of vehicle control. Either of these scenarios can increase the risk of a crash.

Remedy: Dealers will update the ABS calibration, free of charge. Owner notification letters were mailed November 5, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S65.

23V687000 · Electrical System:propulsion System:traction Battery:management System/energy Control Module (bms/becm)

Oct 13, 2023

Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles equipped with an extended range battery. The high voltage battery main contactors may overheat.

Consequence & remedy

Consequence: An overheated high voltage battery contactor can result in a loss of drive power, increasing the risk of a crash.

Remedy: Dealers will replace the high voltage battery junction box, free of charge. Owner notification letters were mailed December 29, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S56. Vehicles included in this recall that were previously repaired under recall 22V-412 will need to have the new remedy completed.

22V412000 · Electrical System:propulsion System:traction Battery:management System/energy Control Module (bms/becm):software

Jun 10, 2022

Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles. The high voltage battery main contactors may overheat.

Consequence & remedy

Consequence: An overheated high voltage battery contactor may cause the vehicle to lose drive power, increasing the risk of a crash.

Remedy: Dealers will update the on-board software, free of charge. Owner notification letters were mailed on July 8, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S41.

22V333000 · Power Train:automatic Transmission:control Module:software; Vehicle Speed Control

May 13, 2022

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles equipped with all-wheel drive. The powertrain control module (PCM) functional safety software may fail to detect a software error, resulting in unintended acceleration, unintended deceleration, or a loss of drive power.

Consequence & remedy

Consequence: Unintended acceleration, unintended deceleration, or a loss of drive power increases the risk of a crash.

Remedy: The PCM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed June 9, 2022. Owners may contact Ford customer service at 1-800-436-7332. Ford's number for this recall is 22S29.

Additional source detail variants (2)

Power Train:automatic Transmission:control Module:software

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles equipped with all-wheel drive. The powertrain control module (PCM) functional safety software may fail to detect a software error, resulting in unintended acceleration, unintended deceleration, or a loss of drive power.

Consequence: Unintended acceleration, unintended deceleration, or a loss of drive power increases the risk of a crash.

Remedy: The PCM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed June 9, 2022. Owners may contact Ford customer service at 1-800-436-7332. Ford's number for this recall is 22S29.

Vehicle Speed Control

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles equipped with all-wheel drive. The powertrain control module (PCM) functional safety software may fail to detect a software error, resulting in unintended acceleration, unintended deceleration, or a loss of drive power.

Consequence: Unintended acceleration, unintended deceleration, or a loss of drive power increases the risk of a crash.

Remedy: The PCM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed June 9, 2022. Owners may contact Ford customer service at 1-800-436-7332. Ford's number for this recall is 22S29.

21V979000 · Seat Belts:rear/other:anchorage

Dec 16, 2021

Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E and 2022 Maverick vehicles. The rear seat belt buckles may not be properly attached to the rear floor assembly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," and 210, "Seat Belt Assembly Anchorages."

Consequence & remedy

Consequence: Improperly attached seat belts may not adequately restrain an occupant in a crash, increasing the risk of injury.

Remedy: Dealers will repair the rear seat belt buckle attachments, free of charge. Owner notification letters were mailed January 28, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C36.

21V711000 · Visibility:windshield; Visibility:windshield:critical Fasteners

Sep 14, 2021

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."

Consequence & remedy

Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.

Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C22.

Additional source detail variants (2)

Visibility:windshield:critical Fasteners

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."

Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.

Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C22.

Visibility:windshield

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."

Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.

Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C22.

21V712000 · Visibility:fixed Panaramic Roof/sky Light Assembly

Sep 14, 2021

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The vehicle's panoramic roof glass panel may not have been properly bonded to the vehicle, which could allow it to detach.

Consequence & remedy

Consequence: A roof panel that separates from a vehicle can become a road hazard, increasing the risk of a crash or injury.

Remedy: Dealers will apply additional urethane adhesive, free of charge. Owner notification letters were mailed October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S42.

21V140000 · Structure:frame And Members; Suspension:subframe/mounting Bracket

Mar 5, 2021

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The front subframe bolts may not have been tightened properly during assembly, which could result in loose bolts.

Consequence & remedy

Consequence: Loose subframe bolts may reduce the vehicle's performance in a crash, increasing the risk of injury.

Remedy: Ford will notify owners, and dealers will inspect the front subframe bolts and tighten them as necessary, free of charge. The recall began April 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S09.

Additional source detail variants (2)

Structure:frame And Members

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The front subframe bolts may not have been tightened properly during assembly, which could result in loose bolts.

Consequence: Loose subframe bolts may reduce the vehicle's performance in a crash, increasing the risk of injury.

Remedy: Ford will notify owners, and dealers will inspect the front subframe bolts and tighten them as necessary, free of charge. The recall began April 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S09.

Suspension:subframe/mounting Bracket

Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The front subframe bolts may not have been tightened properly during assembly, which could result in loose bolts.

Consequence: Loose subframe bolts may reduce the vehicle's performance in a crash, increasing the risk of injury.

Remedy: Ford will notify owners, and dealers will inspect the front subframe bolts and tighten them as necessary, free of charge. The recall began April 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S09.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

4

EA25001 · Collisions Involving Ford Bluecruise

Opened Jan 17, 2025 · No close date supplied

Status: open (inferred from source dates) · Electrical System:adas

On April 25, 2024, NHTSA’s Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24012) to assess BlueCruise, a partial driving automation system available on certain vehicles manufactured by Ford Motor Company (Ford). NHTSA opened the investigation after the agency received notice of two fatal collisions involving BlueCruise-equipped Ford Mustang Mach-E vehicles. Based on the incidents, NHTSA scoped the investigation to 2021-2024 Mustang Mach-E vehicles equipped with BlueCruise. In June 2024, ODI sent an Information Request (IR) letter to Ford requiring that it provide certain information pertaining to crashes, non-crash reports, and technical specifications that relate to BlueCruise, as well as other Ford partial driving automation systems that offer lane and speed maintenance. In its response to ODI’s IR, Ford stated that there are 2,539,962 Ford and Lincoln vehicles (including subject and peer vehicles) equipped with a partial driving automation system within the scope of the request. The majority of these vehicles are equipped with a system that Ford calls Lane Centering Assist (LCA), which is a hands-on partial driving automation system that combines longitudinal control authority governed by Adaptive Cruise Control (ACC) and lateral control authority governed by a steerable path. LCA is offered on a wide range of Ford and Lincoln models beginning in model year 2019. Vehicles that are equipped with BlueCruise, the focus of this investigation, have LCA capability and additionally offer hands-free partial driving automation when certain conditions are met. Hands-free BlueCruise operation is only offered on certain roadways and system availability is geofenced using vehicle GPS. BlueCruise-equipped vehicles employ a camera-based driver monitoring system to determine driver attentiveness to the roadway. BlueCruise was introduced in model year 2021 and is currently available in a select range of Ford and Lincoln vehicles. For BlueCruise- and LCA-equipped vehicles, both ACC and Pre-Collision Assist (PCA) features use a combination of camera and radar sensing technologies to detect and classify objects. ACC is specifically designed to detect vehicles (including cars, trucks, and motorcycles) and bicycles in front of the subject vehicle which are either stationary or moving in the same direction as the subject vehicle. Through this investigation, limitations in the detection of stationary vehicles in certain conditions have been identified. Specifically, due to the potential for false detection of stationary objects at long distances, Ford designed ACC to inhibit any response to reported stationary objects when the subject vehicle’s approach speed is at or above 62 mph. Additionally, system performance may be limited when there is poor visibility due to insufficient illumination. In addition to reviewing Ford’s response to ODI’s IR, the agency conducted a review of crash and non-crash reports identified collectively through Ford’s IR response, incident reporting through Standing General Order 2021-01 (SGO), and NHTSA vehicle owner questionnaires. In total, 32 crashes and 2,004 non-crash reports on subject and peer Ford vehicles were identified across manufacturer and ODI data sources. A detailed analysis of each crash was conducted including the review of any available police reports, photographs, data recovered from in-vehicle event data recorders, connected vehicle data, and/or other information. In both fatal collisions referenced in the PE24012 opening resume, the subject Ford Mustang Mach-E vehicle was traveling over 70 mph on a controlled-access highway during nighttime lighting conditions with hands-free BlueCruise engaged when it collided with a stationary vehicle. Analysis of data imaged from the vehicles’ event data recorders demonstrates that in each incident, the driver did not apply the brakes or take evasive steering action, and no deceleration was initiated by either the BlueCruise system or PCA prior to impact. Through the agency’s crash analysis, four additional frontal collisions were identified where the subject Ford impacted a stopped or slow-moving lead vehicle or another stationary object located in the travel lane. Two of these four incidents involved BlueCruise-equipped Ford Mustang Mach-E vehicles (included in the failure report summary along with the fatal collisions discussed above), while the other two involved other Ford models equipped with the LCA system. Additionally, a trend was identified through analysis of the non-crash reports relating to allegations that ACC (the longitudinal component of both BlueCruise and LCA) failed to detect and/or respond to a stopped or slow-moving lead vehicle. In these reports, consumers often describe that the absence of deceleration initiated by ACC was unexpected and required harsh manual braking or intervention from the PCA to avoid a frontal collision with the lead vehicle. Based on NHTSA’s analysis, system limitations relating to the detection of stationary vehicles while traveling at highway speeds and in nighttime lighting conditions appear to be factors in collisions under investigation and several apparently similar near-miss, non-crash reports. This Engineering Analysis (EA) is being opened to further investigate these system limitations and to evaluate drivers’ ability to respond to scenarios that exceed system limitations. During the EA, the agency expects to, among other things, perform vehicle evaluations, review additional technical information, and perform additional analysis of related crashes and non-crash reports. The crashes included in the failure report summary can be found at NHTSA.gov under the following SGO report identification numbers: 502-7268, 502-7426, 502-6852, 502-8738.

PE24012 · Collisions Involving Ford Bluecruise

Opened Apr 25, 2024 · Closed Jan 17, 2025

Status: closed (inferred from source dates) · Electrical System:adas

On April 25, 2024, NHTSA’s Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24012) to assess BlueCruise, a partial driving automation system available on certain vehicles manufactured by Ford Motor Company (Ford). NHTSA opened the investigation after the agency received notice of two fatal collisions involving BlueCruise-equipped Ford Mustang Mach-E vehicles. Based on the incidents, NHTSA scoped the investigation to 2021-2024 Mustang Mach-E vehicles equipped with BlueCruise. In June 2024, ODI sent an Information Request (IR) letter to Ford requiring that it provide certain information pertaining to crashes, non-crash reports, and technical specifications that relate to BlueCruise, as well as other Ford partial driving automation systems that offer lane and speed maintenance. In its response to ODI’s IR, Ford stated that there are 2,539,962 Ford and Lincoln vehicles (including subject and peer vehicles) equipped with a partial driving automation system within the scope of the request. The majority of these vehicles are equipped with a system that Ford calls Lane Centering Assist (LCA), which is a hands-on partial driving automation system that combines longitudinal control authority governed by Adaptive Cruise Control (ACC) and lateral control authority governed by a steerable path. LCA is offered on a wide range of Ford and Lincoln models beginning in model year 2019. Vehicles that are equipped with BlueCruise, the focus of this investigation, have LCA capability and additionally offer hands-free partial driving automation when certain conditions are met. Hands-free BlueCruise operation is only offered on certain roadways and system availability is geofenced using vehicle GPS. BlueCruise-equipped vehicles employ a camera-based driver monitoring system to determine driver attentiveness to the roadway. BlueCruise was introduced in model year 2021 and is currently available in a select range of Ford and Lincoln vehicles. For BlueCruise- and LCA-equipped vehicles, both ACC and Pre-Collision Assist (PCA) features use a combination of camera and radar sensing technologies to detect and classify objects. ACC is specifically designed to detect vehicles (including cars, trucks, and motorcycles) and bicycles in front of the subject vehicle which are either stationary or moving in the same direction as the subject vehicle. Through this investigation, limitations in the detection of stationary vehicles in certain conditions have been identified. Specifically, due to the potential for false detection of stationary objects at long distances, Ford designed ACC to inhibit any response to reported stationary objects when the subject vehicle’s approach speed is at or above 62 mph. Additionally, system performance may be limited when there is poor visibility due to insufficient illumination. In addition to reviewing Ford’s response to ODI’s IR, the agency conducted a review of crash and non-crash reports identified collectively through Ford’s IR response, incident reporting through Standing General Order 2021-01 (SGO), and NHTSA vehicle owner questionnaires. In total, 32 crashes and 2,004 non-crash reports on subject and peer Ford vehicles were identified across manufacturer and ODI data sources. A detailed analysis of each crash was conducted including the review of any available police reports, photographs, data recovered from in-vehicle event data recorders, connected vehicle data, and/or other information. In both fatal collisions referenced in the PE24012 opening resume, the subject Ford Mustang Mach-E vehicle was traveling over 70 mph on a controlled-access highway during nighttime lighting conditions with hands-free BlueCruise engaged when it collided with a stationary vehicle. Analysis of data imaged from the vehicles’ event data recorders demonstrates that in each incident, the driver did not apply the brakes or take evasive steering action, and no deceleration was initiated by either the BlueCruise system or PCA prior to impact. Through the agency’s crash analysis, four additional frontal collisions were identified where the subject Ford impacted a stopped or slow-moving lead vehicle or another stationary object located in the travel lane. Two of these four incidents involved BlueCruise-equipped Ford Mustang Mach-E vehicles (included in the failure report summary along with the fatal collisions discussed above), while the other two involved other Ford models equipped with the LCA system. Additionally, a trend was identified through analysis of the non-crash reports relating to allegations that ACC (the longitudinal component of both BlueCruise and LCA) failed to detect and/or respond to a stopped or slow-moving lead vehicle. In these reports, consumers often describe that the absence of deceleration initiated by ACC was unexpected and required harsh manual braking or intervention from the PCA to avoid a frontal collision with the lead vehicle. Based on NHTSA’s analysis, system limitations relating to the detection of stationary vehicles while traveling at highway speeds and in nighttime lighting conditions appear to be factors in collisions under investigation and several apparently similar near-miss, non-crash reports. This Preliminary Evaluation is being upgraded to an Engineering Analysis (EA25001) to further investigate these system limitations and to evaluate drivers’ ability to respond to scenarios that exceed system limitations. During the EA, the agency expects to, among other things, perform vehicle evaluations, review additional technical information, and perform additional analysis of related crashes and non-crash reports. The crashes included in the failure report summary can be found at NHTSA.gov under the following SGO report identification numbers: 502-7268, 502-7426, 502-6852, 502-8738.

RQ23004 · High Voltage Battery Contactor Failure

Opened Aug 17, 2023 · Closed Dec 6, 2023

Status: closed (inferred from source dates) · Electrical System:propulsion System:traction Battery:management System/energy Control Module (bms/becm):software; Engine And Engine Cooling:engine:engine Control Module (ecu/ecm):software

On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

Additional source detail variants (2)

Electrical System:propulsion System:traction Battery:management System/energy Control Module (bms/becm):software

On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

Engine And Engine Cooling:engine:engine Control Module (ecu/ecm):software

On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

DP22005 · Pedestrian Alert Sounds

Opened Jan 27, 2023 · Closed Aug 7, 2023

Status: closed (inferred from source dates) · Electrical System:propulsion System

NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.