NHTSA owner reports · September 18, 2026 snapshot.
Forward Collision Avoidance complaints
104 reportsClear category filterMileage unknown · Jun 22, 2026
Forward Collision AvoidanceLane Departure
Vehicle: 2021 Ford Mustang Mach-E VIN: [XXX] Mileage: 56,005 I am filing this complaint to bring to NHTSA's attention a safety concern regarding Ford Motor Company's decision to make the Blue Cruise driver-assistance system available only via a paid subscription beginning January 2027, at a cost of $49.99 per month. Blue Cruis…
Read full complaint
Vehicle: 2021 Ford Mustang Mach-E VIN: [XXX] Mileage: 56,005 I am filing this complaint to bring to NHTSA's attention a safety concern regarding Ford Motor Company's decision to make the Blue Cruise driver-assistance system available only via a paid subscription beginning January 2027, at a cost of $49.99 per month. Blue Cruise is a hands-free highway driving assistance system — a Level 2 driver-assistance safety technology. The hardware enabling this system was installed in my vehicle at the time of purchase and was represented as a feature of the vehicle. Ford is now moving to disable this safety feature on existing, in-service vehicles unless owners pay an ongoing subscription fee. I respectfully request that NHTSA examine whether a manufacturer's ability to remotely disable or withhold active safety technology on vehicles already in service — technology that was sold as part of the vehicle — raises concerns under federal motor vehicle safety standards. Specifically: 1. Consumers purchased these vehicles with the reasonable expectation that installed safety hardware would remain functional. 2. Ford's decision to monetize this feature post-sale, on vehicles already in service, effectively degrades the safety capability of those vehicles for owners who cannot or will not pay. 3. The precedent this sets — manufacturers using over-the-air software controls to disable safety features for revenue — warrants regulatory attention. I am not alone in this concern. There are thousands of Blue Cruise-equipped Mustang Mach-E, F-150, and Expedition owners facing this same situation. I respectfully ask NHTSA to investigate whether Ford's subscription model for Blue Cruise is consistent with federal vehicle safety obligations, and whether any regulatory guidance is warranted to protect consumers from the post-sale removal of safety technology. [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA ODI #11745591
Mileage unknown · Jun 17, 2026
Forward Collision Avoidance
The front camera system does not function which causes all forward collision safety features to become unavailable, as well as any cruise control or automatic high beam lights. Seems to be a common issues and is related to faulty fiber optic cables.
NHTSA ODI #11744862
Mileage unknown · May 27, 2026
Electrical SystemForward Collision Avoidance
This is a safety issue. The front collision assist is not working. I have returned the car to the Ford Dealer (Biener Ford) several times but the dangerous issue persists. I'm not the only one. There are many complaints listed on the web and the Ford Mach E forum. Ford needs to recall their EV Ford Mach-E vehicles and fix th…
Read full complaint
This is a safety issue. The front collision assist is not working. I have returned the car to the Ford Dealer (Biener Ford) several times but the dangerous issue persists. I'm not the only one. There are many complaints listed on the web and the Ford Mach E forum. Ford needs to recall their EV Ford Mach-E vehicles and fix this dangerous safety issue once and for all.
NHTSA ODI #11740320
Mileage unknown · May 7, 2026
Electrical SystemForward Collision Avoidance
The car gives two messages, "Front Camera Fault Service Required" and "Pre-Collision assist not available." The cruise control does not work, however, the front camera does work. I had the vehicle scan done at the Ford dealer and was told it needs a 7 hour software update, after which it may need cables replaced. I do not und…
Read full complaint
The car gives two messages, "Front Camera Fault Service Required" and "Pre-Collision assist not available." The cruise control does not work, however, the front camera does work. I had the vehicle scan done at the Ford dealer and was told it needs a 7 hour software update, after which it may need cables replaced. I do not understand how software goes bad. I do understand something may have happened to cables but that would not be checked until they had charged me $ 1,400 for a software update. This is a safety issue and, from what I read on the Mach E forum, is not where near unique to my vehicle.
NHTSA ODI #11736423
Mileage unknown · Apr 29, 2026
Forward Collision AvoidanceVehicle Speed Control
Vehicle: 2021 Ford Mustang Mach-E Component: Image Processing Module A (IPMA) / Front Camera / Forward Collision Avoidance System The IPMA and front camera system have failed, disabling Pre-Collision Assist, AEB, forward collision warning, and adaptive cruise control while driving. The vehicle is available for inspection upon r…
Read full complaint
Vehicle: 2021 Ford Mustang Mach-E Component: Image Processing Module A (IPMA) / Front Camera / Forward Collision Avoidance System The IPMA and front camera system have failed, disabling Pre-Collision Assist, AEB, forward collision warning, and adaptive cruise control while driving. The vehicle is available for inspection upon request. Warning messages "Front Camera Fault Service Required" and "Pre-Collision Assist Not Available" first appeared August 24, 2022 and have recurred consistently over nearly four years. No accident, physical damage, or obstruction was present at any occurrence. This failure puts safety at risk by silently disabling AEB and forward collision warning during normal driving — systems a driver may depend on in an emergency braking situation with no advance notice they are unavailable. The problem was confirmed by a Ford dealership in February 2026. Their repair order documents: "RAN IPMA SELF TEST AND FOUND DTC SET U3000-49... HARDWARE TEST FAILED... FOUND TSB RELATED REC REPLACE MODULE." The dealer contacted Ford, who authorized 50% off the module replacement only, characterizing it as a "loyal customer discount" rather than a warranty or goodwill repair. I declined to pay for the fix. NHTSA Campaign 11028164 (superseding TSB 25-2156) covers this exact failure. Ford's own TSB acknowledges the defect and the dealer confirmed it applies to my vehicle, yet owners are being quoted up to $8,000 for a known safety system failure. I'm requesting NHTSA investigate whether this warrants a recall. First occurrence: August 24, 2022 (mileage not recorded) Service visit: February 17-18, 2026 at 80,029 miles Current mileage: 83,988 Attachments: photos of both fault messages, dealer invoice
NHTSA ODI #11734458
Mileage unknown · Mar 30, 2026
Forward Collision AvoidanceLane Departure
The front camera has failed and it is available for inspection upon request. The safety of myself and everyone in my car is at risk when the pre-collision assist is not available due to this components failure. Yes, it is a daily occurrence and the camera never stays on for long. A fix was attempted once by a dealer. The compo…
Read full complaint
The front camera has failed and it is available for inspection upon request. The safety of myself and everyone in my car is at risk when the pre-collision assist is not available due to this components failure. Yes, it is a daily occurrence and the camera never stays on for long. A fix was attempted once by a dealer. The component has not been inspected by either of those parties. Only the dealer whom the car was purchased from. Yes, warning messages pop up every time in the car and in the phone app about the issue. They first appeared before car purchase when the dealer fixed it in early February. Then it resumed again in late February/March.
NHTSA ODI #11728154
Mileage unknown · Mar 21, 2026
Forward Collision Avoidance
An error message intermittently pops up on my vehicle that says, "Front Camera Fault", causing collision assistance and adaptive cruise control to suddenly stop working. This is a major safety issue, as a failure of adaptive cruise control while under operation may lead to a risk of an accident. Ford is aware of this issue and…
Read full complaint
An error message intermittently pops up on my vehicle that says, "Front Camera Fault", causing collision assistance and adaptive cruise control to suddenly stop working. This is a major safety issue, as a failure of adaptive cruise control while under operation may lead to a risk of an accident. Ford is aware of this issue and has issued TSB 23-2155, but they are treating it like a standard repair and not covering vehicles out of warranty. This should be a safety recall. See here for many others with the same issue: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA ODI #11726068
Mileage unknown · Dec 24, 2025
Back Over PreventionForward Collision AvoidanceLane Departure
The backup camera and 360 view stopped working, and the reverse break assist is not available when placing the vehicle in reverse. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA ODI #11706917
Mileage unknown · Oct 22, 2025
Forward Collision Avoidance
The car would intermittently give an error saying pre-collision assist not available and now this error is permanent. There is a technical service bulletin for it 23-2155 Lots of people have been complaining about this in the mach e forum https://www.macheforum.com/site/threads/front-camera-fault-pre-collision-assist-not-ava…
Read full complaint
The car would intermittently give an error saying pre-collision assist not available and now this error is permanent. There is a technical service bulletin for it 23-2155 Lots of people have been complaining about this in the mach e forum https://www.macheforum.com/site/threads/front-camera-fault-pre-collision-assist-not-available-errors.18710/page-69#post-1026803 This causes people to drop out from the automatic driving bluecruise without notice and adaptive cruise control becomes unusable.
NHTSA ODI #11695140
Mileage unknown · Oct 14, 2025
Forward Collision AvoidanceCrash
There are many reports of the Mustang Mach E "accelerating unexpectedly." This usually happens in parking lots or other situations involving low speed and a rapid turn of the wheel. I know exactly what the problem is, because it happened to me this morning. While parking in my parking garage, my car rapidly accelerated uphill an…
Read full complaint
There are many reports of the Mustang Mach E "accelerating unexpectedly." This usually happens in parking lots or other situations involving low speed and a rapid turn of the wheel. I know exactly what the problem is, because it happened to me this morning. While parking in my parking garage, my car rapidly accelerated uphill and I only narrowly avoided hitting a wall. Here is why: There are two interconnected problems. The first is that the "cruise control on/off" button is located on the far left of the interior of the steering wheel, which makes it easy to accidentally press when doing a sharp, quick one-handed turn of the wheel (like when parking). When this happens, CC engages while in the act of parking. This is exactly what happened to me. I accidentally hit the button while doing a sharp twist of the wheel, I saw the CC engage, the car rapidly accelerated uphill without my foot on the gas pedal, and I would have hit the wall in front of me if I had been a split-second slower in hitting the brake. The second problem is that there is supposed to be a failsafe for accidentally activating CC at low speed, BUT IT DOESN'T ALWAYS WORK. Page 224 of my manual says "Press the button to activate system. When the system activates, the set speed is equal to whichever is greater, the current vehicle speed, or 15 mph...." This part is true, and this is how the unexpected acceleration to 15mph occurs when parking. But the manual continues: "If the speed is too low, or other conditions are not correct for adaptive cruise control activation, the system enters standby mode. When you are below 15 mph ... adaptive cruise control does not activate unless you are following another vehicle." This is FALSE. This did not work. Clearly the CC mistook the wall in front of me for "following another vehicle." And so, when I accidentally activated CC while parking, it lurched forward UPHILL to 15mph toward a wall a few feet away. Ford needs to move the button and/or fix the failsafe.
NHTSA ODI #11693304
Official recalls
13Jun 30, 2026
Ford Motor Company (Ford) is recalling certain 2021-2023 Mustang Mach E vehicles. The rear differential pinion shaft may fracture.
Consequence & remedy
Consequence: Differential pinion shaft fracture may result in a loss of drive power, or unintended vehicle movement if the vehicle is in park without the parking brake applied, increasing the risk of a crash.
Remedy: Dealers will repair or replace the rear differential assembly as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed July 13, 2026. Additional letters will be sent once the remedy is available, anticipated in late December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S50.
Aug 8, 2025
Ford Motor Company (Ford) is recalling certain 2021 Mach-E vehicles that were repaired incorrectly under recall 24V777. An Over-The-Air (OTA) update to the Anti-lock Braking System (ABS) may result in a loss of power brake assist, ABS, Electronic Stability Control, Traction Control, and driver assistance features.
Consequence & remedy
Consequence: A loss of power brake assist can increase the distance required to stop the vehicle. Additionally, a disabled antilock brake system and/or stability control system can result in a loss of vehicle control. Either of these scenarios can increase the risk of a crash.
Remedy: Dealers will update the ABS calibration software, free of charge. Owner notification letters were mailed September 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S81.
Jun 13, 2025
Ford Motor Company (Ford) is recalling certain 2021-2025 Mustang Mach E vehicles. In the event of a low battery charge, the electronic door latches may remain locked once the driver or front passenger exits and shuts the door, possibly trapping someone who is unable to use the inside door release handles, such as a child in the back seat.
Consequence & remedy
Consequence: The inability to enter or exit the vehicle in an emergency increases the risk of injury.
Remedy: Dealers will update the Powertrain Control Module (PCM) and the Secondary On-Board Diagnostic Control Module C (SOBDMC) software, free of charge. Owner notification letters were mailed to 2021-2025 Mustang Mach-E owners September 12, 2025. Additionally, Owner notification letters were mailed to 2024-2025 Mustang Mach-E owners July 10, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S65.
Additional source detail variants (2)
Electrical System:body Control Module:software
Ford Motor Company (Ford) is recalling certain 2021-2025 Mustang Mach E vehicles. In the event of a low battery charge, the electronic door latches may remain locked once the driver or front passenger exits and shuts the door, possibly trapping someone who is unable to use the inside door release handles, such as a child in the back seat.
Consequence: The inability to enter or exit the vehicle in an emergency increases the risk of injury.
Remedy: Dealers will update the Powertrain Control Module (PCM) and the Secondary On-Board Diagnostic Control Module C (SOBDMC) software, free of charge. Owner notification letters were mailed to 2021-2025 Mustang Mach-E owners September 12, 2025. Additionally, Owner notification letters were mailed to 2024-2025 Mustang Mach-E owners July 10, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S65.
Latches/locks/linkages:doors:latch
Ford Motor Company (Ford) is recalling certain 2021-2025 Mustang Mach E vehicles. In the event of a low battery charge, the electronic door latches may remain locked once the driver or front passenger exits and shuts the door, possibly trapping someone who is unable to use the inside door release handles, such as a child in the back seat.
Consequence: The inability to enter or exit the vehicle in an emergency increases the risk of injury.
Remedy: Dealers will update the Powertrain Control Module (PCM) and the Secondary On-Board Diagnostic Control Module C (SOBDMC) software, free of charge. Owner notification letters were mailed to 2021-2025 Mustang Mach-E owners September 12, 2025. Additionally, Owner notification letters were mailed to 2024-2025 Mustang Mach-E owners July 10, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S65.
May 9, 2025
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence & remedy
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
Feb 28, 2025
Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles previously repaired incorrectly under recall number 22V-412. The high voltage battery main contactors may overheat.
Consequence & remedy
Consequence: An overheated high voltage battery contactor may cause the vehicle to lose drive power, increasing the risk of a crash.
Remedy: Dealers will update the on-board software, free of charge. Owner notification letters were mailed April 11, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S14.
Oct 18, 2024
Ford Motor Company (Ford) is recalling certain 2021 Mach-E vehicles. An Over-The-Air (OTA) update to the Anti-lock Braking System (ABS) may result in a loss of power brake assist, ABS, Electronic Stability Control, Traction Control, and driver assistance features.
Consequence & remedy
Consequence: A loss of power brake assist can extend the distance required to stop the vehicle. Additionally, a disabled antilock brake system and/or stability control system can result in a loss of vehicle control. Either of these scenarios can increase the risk of a crash.
Remedy: Dealers will update the ABS calibration, free of charge. Owner notification letters were mailed November 5, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S65.
Oct 13, 2023
Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles equipped with an extended range battery. The high voltage battery main contactors may overheat.
Consequence & remedy
Consequence: An overheated high voltage battery contactor can result in a loss of drive power, increasing the risk of a crash.
Remedy: Dealers will replace the high voltage battery junction box, free of charge. Owner notification letters were mailed December 29, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S56. Vehicles included in this recall that were previously repaired under recall 22V-412 will need to have the new remedy completed.
Jun 10, 2022
Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles. The high voltage battery main contactors may overheat.
Consequence & remedy
Consequence: An overheated high voltage battery contactor may cause the vehicle to lose drive power, increasing the risk of a crash.
Remedy: Dealers will update the on-board software, free of charge. Owner notification letters were mailed on July 8, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S41.
May 13, 2022
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles equipped with all-wheel drive. The powertrain control module (PCM) functional safety software may fail to detect a software error, resulting in unintended acceleration, unintended deceleration, or a loss of drive power.
Consequence & remedy
Consequence: Unintended acceleration, unintended deceleration, or a loss of drive power increases the risk of a crash.
Remedy: The PCM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed June 9, 2022. Owners may contact Ford customer service at 1-800-436-7332. Ford's number for this recall is 22S29.
Additional source detail variants (2)
Power Train:automatic Transmission:control Module:software
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles equipped with all-wheel drive. The powertrain control module (PCM) functional safety software may fail to detect a software error, resulting in unintended acceleration, unintended deceleration, or a loss of drive power.
Consequence: Unintended acceleration, unintended deceleration, or a loss of drive power increases the risk of a crash.
Remedy: The PCM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed June 9, 2022. Owners may contact Ford customer service at 1-800-436-7332. Ford's number for this recall is 22S29.
Vehicle Speed Control
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles equipped with all-wheel drive. The powertrain control module (PCM) functional safety software may fail to detect a software error, resulting in unintended acceleration, unintended deceleration, or a loss of drive power.
Consequence: Unintended acceleration, unintended deceleration, or a loss of drive power increases the risk of a crash.
Remedy: The PCM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed June 9, 2022. Owners may contact Ford customer service at 1-800-436-7332. Ford's number for this recall is 22S29.
Dec 16, 2021
Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E and 2022 Maverick vehicles. The rear seat belt buckles may not be properly attached to the rear floor assembly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," and 210, "Seat Belt Assembly Anchorages."
Consequence & remedy
Consequence: Improperly attached seat belts may not adequately restrain an occupant in a crash, increasing the risk of injury.
Remedy: Dealers will repair the rear seat belt buckle attachments, free of charge. Owner notification letters were mailed January 28, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C36.
Sep 14, 2021
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence & remedy
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C22.
Additional source detail variants (2)
Visibility:windshield:critical Fasteners
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C22.
Visibility:windshield
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C22.
Sep 14, 2021
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The vehicle's panoramic roof glass panel may not have been properly bonded to the vehicle, which could allow it to detach.
Consequence & remedy
Consequence: A roof panel that separates from a vehicle can become a road hazard, increasing the risk of a crash or injury.
Remedy: Dealers will apply additional urethane adhesive, free of charge. Owner notification letters were mailed October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S42.
Mar 5, 2021
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The front subframe bolts may not have been tightened properly during assembly, which could result in loose bolts.
Consequence & remedy
Consequence: Loose subframe bolts may reduce the vehicle's performance in a crash, increasing the risk of injury.
Remedy: Ford will notify owners, and dealers will inspect the front subframe bolts and tighten them as necessary, free of charge. The recall began April 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S09.
Additional source detail variants (2)
Structure:frame And Members
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The front subframe bolts may not have been tightened properly during assembly, which could result in loose bolts.
Consequence: Loose subframe bolts may reduce the vehicle's performance in a crash, increasing the risk of injury.
Remedy: Ford will notify owners, and dealers will inspect the front subframe bolts and tighten them as necessary, free of charge. The recall began April 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S09.
Suspension:subframe/mounting Bracket
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The front subframe bolts may not have been tightened properly during assembly, which could result in loose bolts.
Consequence: Loose subframe bolts may reduce the vehicle's performance in a crash, increasing the risk of injury.
Remedy: Ford will notify owners, and dealers will inspect the front subframe bolts and tighten them as necessary, free of charge. The recall began April 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S09.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
4EA25001 · Collisions Involving Ford Bluecruise
Opened Jan 17, 2025 · No close date supplied
Status: open (inferred from source dates) · Electrical System:adas
On April 25, 2024, NHTSA’s Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24012) to assess BlueCruise, a partial driving automation system available on certain vehicles manufactured by Ford Motor Company (Ford). NHTSA opened the investigation after the agency received notice of two fatal collisions involving BlueCruise-equipped Ford Mustang Mach-E vehicles. Based on the incidents, NHTSA scoped the investigation to 2021-2024 Mustang Mach-E vehicles equipped with BlueCruise. In June 2024, ODI sent an Information Request (IR) letter to Ford requiring that it provide certain information pertaining to crashes, non-crash reports, and technical specifications that relate to BlueCruise, as well as other Ford partial driving automation systems that offer lane and speed maintenance. In its response to ODI’s IR, Ford stated that there are 2,539,962 Ford and Lincoln vehicles (including subject and peer vehicles) equipped with a partial driving automation system within the scope of the request. The majority of these vehicles are equipped with a system that Ford calls Lane Centering Assist (LCA), which is a hands-on partial driving automation system that combines longitudinal control authority governed by Adaptive Cruise Control (ACC) and lateral control authority governed by a steerable path. LCA is offered on a wide range of Ford and Lincoln models beginning in model year 2019. Vehicles that are equipped with BlueCruise, the focus of this investigation, have LCA capability and additionally offer hands-free partial driving automation when certain conditions are met. Hands-free BlueCruise operation is only offered on certain roadways and system availability is geofenced using vehicle GPS. BlueCruise-equipped vehicles employ a camera-based driver monitoring system to determine driver attentiveness to the roadway. BlueCruise was introduced in model year 2021 and is currently available in a select range of Ford and Lincoln vehicles. For BlueCruise- and LCA-equipped vehicles, both ACC and Pre-Collision Assist (PCA) features use a combination of camera and radar sensing technologies to detect and classify objects. ACC is specifically designed to detect vehicles (including cars, trucks, and motorcycles) and bicycles in front of the subject vehicle which are either stationary or moving in the same direction as the subject vehicle. Through this investigation, limitations in the detection of stationary vehicles in certain conditions have been identified. Specifically, due to the potential for false detection of stationary objects at long distances, Ford designed ACC to inhibit any response to reported stationary objects when the subject vehicle’s approach speed is at or above 62 mph. Additionally, system performance may be limited when there is poor visibility due to insufficient illumination. In addition to reviewing Ford’s response to ODI’s IR, the agency conducted a review of crash and non-crash reports identified collectively through Ford’s IR response, incident reporting through Standing General Order 2021-01 (SGO), and NHTSA vehicle owner questionnaires. In total, 32 crashes and 2,004 non-crash reports on subject and peer Ford vehicles were identified across manufacturer and ODI data sources. A detailed analysis of each crash was conducted including the review of any available police reports, photographs, data recovered from in-vehicle event data recorders, connected vehicle data, and/or other information. In both fatal collisions referenced in the PE24012 opening resume, the subject Ford Mustang Mach-E vehicle was traveling over 70 mph on a controlled-access highway during nighttime lighting conditions with hands-free BlueCruise engaged when it collided with a stationary vehicle. Analysis of data imaged from the vehicles’ event data recorders demonstrates that in each incident, the driver did not apply the brakes or take evasive steering action, and no deceleration was initiated by either the BlueCruise system or PCA prior to impact. Through the agency’s crash analysis, four additional frontal collisions were identified where the subject Ford impacted a stopped or slow-moving lead vehicle or another stationary object located in the travel lane. Two of these four incidents involved BlueCruise-equipped Ford Mustang Mach-E vehicles (included in the failure report summary along with the fatal collisions discussed above), while the other two involved other Ford models equipped with the LCA system. Additionally, a trend was identified through analysis of the non-crash reports relating to allegations that ACC (the longitudinal component of both BlueCruise and LCA) failed to detect and/or respond to a stopped or slow-moving lead vehicle. In these reports, consumers often describe that the absence of deceleration initiated by ACC was unexpected and required harsh manual braking or intervention from the PCA to avoid a frontal collision with the lead vehicle. Based on NHTSA’s analysis, system limitations relating to the detection of stationary vehicles while traveling at highway speeds and in nighttime lighting conditions appear to be factors in collisions under investigation and several apparently similar near-miss, non-crash reports. This Engineering Analysis (EA) is being opened to further investigate these system limitations and to evaluate drivers’ ability to respond to scenarios that exceed system limitations. During the EA, the agency expects to, among other things, perform vehicle evaluations, review additional technical information, and perform additional analysis of related crashes and non-crash reports. The crashes included in the failure report summary can be found at NHTSA.gov under the following SGO report identification numbers: 502-7268, 502-7426, 502-6852, 502-8738.
PE24012 · Collisions Involving Ford Bluecruise
Opened Apr 25, 2024 · Closed Jan 17, 2025
Status: closed (inferred from source dates) · Electrical System:adas
On April 25, 2024, NHTSA’s Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24012) to assess BlueCruise, a partial driving automation system available on certain vehicles manufactured by Ford Motor Company (Ford). NHTSA opened the investigation after the agency received notice of two fatal collisions involving BlueCruise-equipped Ford Mustang Mach-E vehicles. Based on the incidents, NHTSA scoped the investigation to 2021-2024 Mustang Mach-E vehicles equipped with BlueCruise. In June 2024, ODI sent an Information Request (IR) letter to Ford requiring that it provide certain information pertaining to crashes, non-crash reports, and technical specifications that relate to BlueCruise, as well as other Ford partial driving automation systems that offer lane and speed maintenance. In its response to ODI’s IR, Ford stated that there are 2,539,962 Ford and Lincoln vehicles (including subject and peer vehicles) equipped with a partial driving automation system within the scope of the request. The majority of these vehicles are equipped with a system that Ford calls Lane Centering Assist (LCA), which is a hands-on partial driving automation system that combines longitudinal control authority governed by Adaptive Cruise Control (ACC) and lateral control authority governed by a steerable path. LCA is offered on a wide range of Ford and Lincoln models beginning in model year 2019. Vehicles that are equipped with BlueCruise, the focus of this investigation, have LCA capability and additionally offer hands-free partial driving automation when certain conditions are met. Hands-free BlueCruise operation is only offered on certain roadways and system availability is geofenced using vehicle GPS. BlueCruise-equipped vehicles employ a camera-based driver monitoring system to determine driver attentiveness to the roadway. BlueCruise was introduced in model year 2021 and is currently available in a select range of Ford and Lincoln vehicles. For BlueCruise- and LCA-equipped vehicles, both ACC and Pre-Collision Assist (PCA) features use a combination of camera and radar sensing technologies to detect and classify objects. ACC is specifically designed to detect vehicles (including cars, trucks, and motorcycles) and bicycles in front of the subject vehicle which are either stationary or moving in the same direction as the subject vehicle. Through this investigation, limitations in the detection of stationary vehicles in certain conditions have been identified. Specifically, due to the potential for false detection of stationary objects at long distances, Ford designed ACC to inhibit any response to reported stationary objects when the subject vehicle’s approach speed is at or above 62 mph. Additionally, system performance may be limited when there is poor visibility due to insufficient illumination. In addition to reviewing Ford’s response to ODI’s IR, the agency conducted a review of crash and non-crash reports identified collectively through Ford’s IR response, incident reporting through Standing General Order 2021-01 (SGO), and NHTSA vehicle owner questionnaires. In total, 32 crashes and 2,004 non-crash reports on subject and peer Ford vehicles were identified across manufacturer and ODI data sources. A detailed analysis of each crash was conducted including the review of any available police reports, photographs, data recovered from in-vehicle event data recorders, connected vehicle data, and/or other information. In both fatal collisions referenced in the PE24012 opening resume, the subject Ford Mustang Mach-E vehicle was traveling over 70 mph on a controlled-access highway during nighttime lighting conditions with hands-free BlueCruise engaged when it collided with a stationary vehicle. Analysis of data imaged from the vehicles’ event data recorders demonstrates that in each incident, the driver did not apply the brakes or take evasive steering action, and no deceleration was initiated by either the BlueCruise system or PCA prior to impact. Through the agency’s crash analysis, four additional frontal collisions were identified where the subject Ford impacted a stopped or slow-moving lead vehicle or another stationary object located in the travel lane. Two of these four incidents involved BlueCruise-equipped Ford Mustang Mach-E vehicles (included in the failure report summary along with the fatal collisions discussed above), while the other two involved other Ford models equipped with the LCA system. Additionally, a trend was identified through analysis of the non-crash reports relating to allegations that ACC (the longitudinal component of both BlueCruise and LCA) failed to detect and/or respond to a stopped or slow-moving lead vehicle. In these reports, consumers often describe that the absence of deceleration initiated by ACC was unexpected and required harsh manual braking or intervention from the PCA to avoid a frontal collision with the lead vehicle. Based on NHTSA’s analysis, system limitations relating to the detection of stationary vehicles while traveling at highway speeds and in nighttime lighting conditions appear to be factors in collisions under investigation and several apparently similar near-miss, non-crash reports. This Preliminary Evaluation is being upgraded to an Engineering Analysis (EA25001) to further investigate these system limitations and to evaluate drivers’ ability to respond to scenarios that exceed system limitations. During the EA, the agency expects to, among other things, perform vehicle evaluations, review additional technical information, and perform additional analysis of related crashes and non-crash reports. The crashes included in the failure report summary can be found at NHTSA.gov under the following SGO report identification numbers: 502-7268, 502-7426, 502-6852, 502-8738.
RQ23004 · High Voltage Battery Contactor Failure
Opened Aug 17, 2023 · Closed Dec 6, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System:traction Battery:management System/energy Control Module (bms/becm):software; Engine And Engine Cooling:engine:engine Control Module (ecu/ecm):software
On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Electrical System:propulsion System:traction Battery:management System/energy Control Module (bms/becm):software
On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Engine And Engine Cooling:engine:engine Control Module (ecu/ecm):software
On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
Illustration