2020 Ford Fusion

In early October 2025, the vehicle was taken to an independent dealership service department for a routine oil change. Several weeks later, the vehicle appeared to be leaking fluid and began experiencing loud knocking/clacking noises, significant vibration, and drivability concerns, especially during acceleration. On October 10, 2025, while parked at a family member’s residence, the vehicle would not start. Due to safety concerns, the servicing dealership arranged for the vehicle to be towed for inspection. Technicians found a split transmission hose causing transmission fluid loss, which was repaired; however, the abnormal noises, vibration, and drivability issues persisted. Further inspection identified loud popping/clacking noises from the bell housing area. The technician physically inspected the flex plate and documented that the flex plate was cracked. The dealership advised that a cracked flex plate can worsen, cause severe vibration, damage related components, and lead to drivability issues or potential loss of propulsion. Because of the nature of the failure and symptoms, the vehicle was removed from regular use due to safety concerns. The vehicle was later taken to a manufacturer-authorized Ford dealership, which confirmed flex plate failure but stated the vehicle did not qualify for a customer satisfaction program due to engine variant. A goodwill/financial assistance request was submitted and denied. Technician diagnostic documentation from the manufacturer-authorized dealership was requested but not provided prior to filing this complaint. No crash or injury occurred; however, the failure created a risk of sudden inability to propel the vehicle while driving, including at highway speeds. The vehicle remains unrepaired and parked due to cost and safety concerns.

My Ford started making a loud noise whenever the accelerator wasn't being pressed, after taking it to the mechanic, he said it is the cracked flex plate. After some light research, it was aparent that this is an issue that Ford's cars have, and ford has tried to make it better by offering free fixes. I contacted the local ford dealer and since the car has 90,000 miles, it would have been covered. However, since it doesn't have a clean title, I was declined this service free of charge. I don't agree with this decision since I've been driving this car for over a year since it was purchased off IAA auction, and this issue was made clear only yesterday, but this issue is prevalent in cars like mine.The damage to my car specifically was to the back, and only affected the rear bumper and trunk. Therefore I don't think it is fair that I was declined the serve even though Ford has made it clear it is there manufacturing mistake and they are willing to fix it, just not with cars with my type of title. I was hoping to send in this incident so that this issue becomes a national recall, and more people can get their cars rightfully fixed and aware of this serious issue that can make the car completely unusable before it gets too late. I wasn't aware this was a common issue when purchasing this car, so a recall would protect more people since it will become mandatory information for owners to be aware of this issue. Thank you!

During a road trip, received an error message indicating "SHIFT SYS FAULT" after the vehicle would not shift out of park. Upon inspecting the vehicle, it was noticed that the transmission linkage cable bushing was missing. The error message had appeared the day before, but the vehicle would still shift and the error message went away after a few seconds. I was unable to recover the original bushing as it was missing when the vehicle was inspected after the error message. Luckily the error did not happen while driving and instead was noticed while the car was in park. The vehicle has not been inspected by anyone other than myself, and I was able to buy a replacement bushing from a local dealership to replace the missing bushing.

My 2020 Ford Fusion has experienced three separate flexplate failures, as well as transmission issues following the most recent repair. Failure #1: Occurred before I owned the vehicle (confirmed later in the vehicle’s history). The flexplate was replaced by a prior owner in 2022. Failure #2: [8/2023] – While I owned the vehicle, a loud rattling noise came from the engine area. My vehicle was towed to Foothill Ford, where it was purchased, and they replaced the flexplate. No power loss occurred. Failure #3: [5/2025] – The same rattling sound returned. I drove it to Green Ford, who confirmed the flexplate needed to be replaced, and they replaced it. No power loss occurred, but the noise was severe. After the third flexplate replacement, the transmission began slipping during acceleration. This issue did not exist before the repair, and Green Ford had told me the transmission was fine before they replaced the flexplate. Safety concern: Repeated flexplate failures and subsequent transmission slipping could cause loss of propulsion or difficulty maintaining speed if the problem occurs at highway speeds or in heavy traffic, creating a potential crash risk. I did lose power on the highway, but was able to pull safely off the shoulder and called a tow truck.

The check engine light came on. The car was regularly losing coolant but none was leaking out. I topped it off but the coolant level lowered again. My mechanic suspects it is a problem with the Ecoboost engine where the coolant leaks into the cylinders. I know there is currently a class action lawsuit against for for Fusions from 2013-2019 addressing this problem.

The contact owns a 2020 Ford Fusion. The contact stated while driving 25 MPH, the vehicle failed to accelerate as intended while depressing the accelerator pedal. The check engine warning light was illuminated. The contact stated there was an abnormal sound coming from the engine. The vehicle as taken to the dealer; however, no cause for the failure was found. The cam shaft sensor was replaced; however, the failure persisted. The contact stated that on another occasion, while driving 8 MPH, the engine seized. The message "See Manual" was displayed. The vehicle was taken to an independent mechanic but was not diagnosed or repaired. The vehicle was taken to several dealers and independent mechanics. The contact was recently informed that the engine needed to be replaced. The vehicle was not repaired due to the cost. The manufacturer was not notified of the failure. The failure mileage was approximately 152,000.

The contact owns a 2020 Ford Fusion. The contact stated that the vehicle was started, there was a large amount of white smoke coming from the exhaust pipe, with the engine sputtering. The vehicle as taken to an independent mechanic and was diagnosed with engine block failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and a complaint was filed. The failure mileage was approximately 71,000.

The contact owns a 2020 Ford Fusion. The contact stated that while driving at various speeds or while the vehicle was idling, there was an abnormal clunking sound coming from the vehicle. There were no warning lights illuminated. The vehicle was taken to the local dealer where it was diagnosed and determined that the flex plate had fractured. The vehicle was repaired; however, the failure recurred. The manufacturer was not contacted. The failure mileage was approximately 25,000.

I purchased a used 2020 Ford Fusion from Carmax n 2023 with about 56,800 miles. A week later was involved in a nor side impact accident on the back end driver side, insurance paid for a dinted door and there was no other issues with the vehicle according to SONS ford. In 2024 I was on the highway (going about 80 mph) when my engine light came on, no more than 3 minutes later all the lights in my car flickered and i lost power to my entire car almost causing me my life, roadside assistance and a mechanic who had thankfully pulled over explained that my alternator completely shredded my belt. I paid for both my alternator and belt to be replaced But most recently (2025) I continued to whirring and knocking noises for 3 days (no warning lights) , I took it to firestone who stated I needed a motor repair so I got it towed to the dealership. A Ford certified mechanic stated my Flex Plate was cracked and it begin breaking off and how I needed a new starter as well leaving the car inoperable. They confirmed this was very uncommon due to the car age and the miles on it (80,000 mi) I’ve also reviewed the complaints on NHTSA and it looks like a lot of 2020 ford fusions are having these issues but yet no recall.

My car is at 47,000 miles and i started To hear a loud noise . Turns out ford says it’s the Flywheel, transmission pump, and torque converter per ford technician who completed my inspection . No warning lights came on nor was there any alerts the ford app. My 2020 Ford Fusion with approximately 48,000 miles experienced a cracked flexplate. This caused severe engine vibration, knocking sounds, and ultimately loss of power while driving. A cracked flexplate can lead to sudden engine stalling or failure to accelerate, especially at highway speeds or during intersections. This puts the driver and passengers at serious risk of a crash due to unexpected loss of power or control. This issue happened without warning and is a known problem in vehicles with the 2.0L EcoBoost engine and 6F35 transmission. Ford is aware of the issue (Customer Satisfaction Program 22N12), but my VIN was not included, even though the symptoms and components match the defect. I am reporting this because it jeopardized my safety and others on the road, and I believe more vehicles should be covered under the existing CSP or a recall.