2019 Ford Fusion

The vehicle experienced engine failure due to coolant intrusion into the cylinders on a 1.5L EcoBoost engine. Symptoms included coolant loss, engine misfires, rough running, check engine light, and eventual engine failure requiring engine replacement. The problem has been confirmed by Ford and is consistent with the known coolant intrusion defect affecting many Ford 1.5L EcoBoost engines. Ford issued Customer Satisfaction Program 21N12 for certain affected vehicles due to this exact issue. The vehicle has approximately 76,000 miles and is under the mileage limit referenced in Ford’s program, but Ford denied full coverage and only offered partial financial assistance toward the repair. This issue creates a serious safety concern because the engine can lose power, misfire, overheat, or fail unexpectedly while driving. The failure appears to be caused by a defect in the engine design allowing coolant to enter the combustion chamber. I believe this is a widespread defect and should be covered for all affected vehicles experiencing coolant intrusion and engine failure.

2019 Ford Fusion with 82,362 miles- just told engine coolant leaking into the cylinder walls and engine replacement is needed. Dealer said Do not drive it! This is a known problem with this model and Ford has not recalled it. Ford is aware and have sent TS Bulletins to their service departments but why NOT recall. My daughter’s safety has been at risk and now the value is worthless Or an engine replacement. I cannot reach any leadership from Ford, just a call center which is telling me nothing can be done.

This vehicle is another of many that is suffering from coolant intrusion due to Fords faulty design. This 2.0 has 68 thousand miles and needs a new engine. This has been a known problem for this engine between 2013 and 2019. We were sold a new car that would be reliable for years, it’s not. Now we may be out upwards of $10,000.00 for a car we just paid off a year ago.

Coolant intrusion into cylinder #2 in my 2.0L Ecoboost engine. This gives a rough engine start and a misfire code for cylinder #2 on cold starts. After warmup, the engine code is not active and misfire goes away when the coolant is burnt and sent through the exhaust. This also caused the car to overheat as the coolant was dropping to a low level. There was no indication of the low coolant level until the overheating.

2019 Ford Fusion equipped with the 1.5L EcoBoost engine has experienced overheating and misfire issues, linked coolant intrusion into the engine cylinders, which can lead to engine overheating and potential fire hazards. This is a KNOWN issue by Ford but they have not issued a recall, or even let me know in the 6 years that I have had the vehicle.