NHTSA owner reports · September 18, 2026 snapshot.
What owners actually said
245 reportsMileage unknown · Mar 18, 2026
Unknown Or Other
I have a 2019 Ford Flex. In 2023 the backup camera stopped working. The screen is blue. This creates a problem when backing up, especially in store parking lots or pulling out of my garage. Unable to view what is behind the vehicle and risk of damage or injury to what is behind me. Dealer inspected and said camera needed …
Read full complaint
I have a 2019 Ford Flex. In 2023 the backup camera stopped working. The screen is blue. This creates a problem when backing up, especially in store parking lots or pulling out of my garage. Unable to view what is behind the vehicle and risk of damage or injury to what is behind me. Dealer inspected and said camera needed to be replaced. We had it replaced in Nov. 2023. Recall received in January 2025. They have yet resolved the recall, and we are still waiting on a $630.00 refund.
NHTSA ODI #11725349
35,500 miles · Mar 18, 2026
Back Over PreventionStructure
The contact owns a 2019 Ford Flex. The contact received notification of NHTSA Campaign Number: 24V951000 (Back Over Prevention). The contact stated that prior to receiving the recall letter, the contact experienced back over prevention camera failure. The contact also received notification of NHTSA Campaign Number: 25V732000 (St…
Read full complaint
The contact owns a 2019 Ford Flex. The contact received notification of NHTSA Campaign Number: 24V951000 (Back Over Prevention). The contact stated that prior to receiving the recall letter, the contact experienced back over prevention camera failure. The contact also received notification of NHTSA Campaign Number: 25V732000 (Structure). Before receiving the recall letter, the driver's side B-pillar cracked in half. The local dealer was notified of the failures several times and informed the contact that parts were not available for the recall repairs. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was not informed of the failure. The failure mileage was approximately 35,500.
NHTSA ODI #11725324
25,000 miles · Mar 17, 2026
Back Over PreventionStructure
The contact owns a 2019 Ford Flex. The contact stated that the back-over prevention camera was inoperable approximately 30 percent of the time. No warning lights were illuminated. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention) and 25V732000 (Structure). The local dealer was contacted…
Read full complaint
The contact owns a 2019 Ford Flex. The contact stated that the back-over prevention camera was inoperable approximately 30 percent of the time. No warning lights were illuminated. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention) and 25V732000 (Structure). The local dealer was contacted and confirmed that parts were on backorder. Another unknown local dealer was contacted, but the vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 25,000.
NHTSA ODI #11724896
Mileage unknown · Mar 15, 2026
Structure
B-Pillar trim molding on passenger side fell off while going through car wash.
NHTSA ODI #11724435
Mileage unknown · Mar 12, 2026
Back Over Prevention
The contact owns a 2019 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.…
Read full complaint
The contact owns a 2019 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
NHTSA ODI #11723828
50,000 miles · Mar 11, 2026
Back Over PreventionStructure
The contact owns a 2019 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The co…
Read full complaint
The contact owns a 2019 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the windshield trim was detaching, causing water to leak into the vehicle on the driver's side. While in reverse, the back over prevention camera displayed the image of the rear of the vehicle that was upside down, or there was no image displayed. The dealer was contacted, and it was confirmed that the parts were not available for the recall repairs. The manufacturer was not made aware of the issue. The failure mileage was approximately 50,000.
NHTSA ODI #11723561
70,286 miles · Mar 9, 2026
Back Over Prevention
The contact owns a 2019 Ford Flex. The contact stated that while reversing, the message “Camera Unavailable” was displayed. The contact stated that the screen was displayed upside down or that there was a blue screen. The vehicle was taken to the dealer, where it was diagnosed and determined with rear-view camera failure. The co…
Read full complaint
The contact owns a 2019 Ford Flex. The contact stated that while reversing, the message “Camera Unavailable” was displayed. The contact stated that the screen was displayed upside down or that there was a blue screen. The vehicle was taken to the dealer, where it was diagnosed and determined with rear-view camera failure. The contact was informed that the rear-view camera display needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The dealer was made aware of the failure. The contact was informed that a recall was initiated; however, the part was not yet available. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The contact received notification of NHTSA Campaign Number: 24V951000 (Back Over Prevention); however, the part was not yet available. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 70,286.
NHTSA ODI #11723017
40,000 miles · Mar 4, 2026
Back Over PreventionStructure
The contact owns a 2019 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The c…
Read full complaint
The contact owns a 2019 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The contact stated that while in reverse, the back over prevention camera displayed the image of the rear of the vehicle upside-down. The dealer was contacted and confirmed that parts were not yet available for the recall repair. The manufacturer was not made aware of the issues. The failure mileage was approximately 40,000.
NHTSA ODI #11721970
90,000 miles · Mar 2, 2026
Back Over Prevention
The contact owns a 2019 Ford Flex. The contact stated that the camera image was upside down and blank, and the message "Camera not Available" was displayed. The camera operated for several seconds and became inoperable. There were no warning lights illuminated. The contact received notification of NHTSA Campaign Number: 24V95100…
Read full complaint
The contact owns a 2019 Ford Flex. The contact stated that the camera image was upside down and blank, and the message "Camera not Available" was displayed. The camera operated for several seconds and became inoperable. There were no warning lights illuminated. The contact received notification of NHTSA Campaign Number: 24V951000 (Back Over Prevention). The local dealer was contacted and confirmed that parts were on backorder. The contact called another local dealer, Chuck Renze Ford of Manistique (751 E. Lakeshore Drive, Manistique, MI 49854); the vehicle was not diagnosed or repaired. The manufacturer was not notified. The failure mileage was approximately 90,000.
NHTSA ODI #11721382
80,000 miles · Feb 26, 2026
Back Over PreventionStructure
The contact owns a 2019 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION) and 25V732000 (STRUCTURE); however, the parts to do the recall repairs were not yet available. The contact stated that the rearview camera displayed a black screen while the vehicle was in reverse(R). T…
Read full complaint
The contact owns a 2019 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION) and 25V732000 (STRUCTURE); however, the parts to do the recall repairs were not yet available. The contact stated that the rearview camera displayed a black screen while the vehicle was in reverse(R). The contact stated that the failure obstructed the driver's visibility, which prevented the driver from safely operating the vehicle. The message "Rear-view Camera Unavailable" was displayed on the screen. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The contact stated that on a separate occasion, while driving at an undisclosed speed, the driver's side B-pillar trim detached from the vehicle. The contact pulled over to the side of the road, exited the vehicle, and, upon inspection, became aware that a section of the B-pillar trim had detached from the vehicle, and the other half was loose and hanging off by the wires. The contact used tape to secure the remaining half of the B-pillar trim. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 80,000.
NHTSA ODI #11720810
Official recalls
4Oct 24, 2025
Ford Motor Company (Ford) is recalling certain 2017-2019 Flex vehicles. The driver and front passenger B-Pillar door trim may detach while driving.
Consequence & remedy
Consequence: Door trim that detaches while driving can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will repair or replace the B-pillar trim as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed December 17, 2025. Additional letters will be sent once the remedy is available, anticipated March 2027. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SB8. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 28, 2025.
Oct 13, 2025
Ford Motor Company (Ford) is recalling certain 2015-2019 Flex, 2015 Explorer, Lincoln MKT, Lincoln MKZ, 2015-2016 C-Max, Escape, Taurus, 2016 Fusion, 2018-2019 Taurus, 2019 Lincoln MKT, Fiesta, and 2020 Mustang vehicles. The rearview camera may display a distorted, intermittent, or blank image when the vehicle is in reverse.
Consequence & remedy
Consequence: A rearview camera that fails to properly display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the rearview camera as necessary, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on October 25, 2025. Additional letters will be mailed once the final remedy is available on each phase. Mustang owner notification letters were mailed January 2, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA9. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 14, 2025.
Dec 20, 2024
Ford Motor Company (Ford) is recalling certain 2019 Flex, Fiesta, and Lincoln MKT vehicles. The rearview camera may intermittently display a blank or distorted image.
Consequence & remedy
Consequence: A rearview camera that displays a blank or distorted image can reduce the drivers view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will replace the rearview camera as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed January 22, 2025. A second notice will be sent once the final remedy is available, anticipated March 2027. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S75.
Aug 20, 2018
Ford Motor Company (Ford) is recalling certain 2018 Ford Edge, Lincoln MKX, 2019 Ford Flex, and Lincoln MKT vehicles. The power supply cables at the starter and the alternator may not have been properly secured, possibly resulting in an electrical arc.
Consequence & remedy
Consequence: An electrical arc can increase the risk of a fire.
Remedy: Ford will notify owners, and dealers will inspect the alternator and starter motor power supply cables to verify that they are properly secured, correcting them as necessary, free of charge. The recall began September 26, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S25.
Additional source detail variants (2)
Electrical System:starter Assembly
Ford Motor Company (Ford) is recalling certain 2018 Ford Edge, Lincoln MKX, 2019 Ford Flex, and Lincoln MKT vehicles. The power supply cables at the starter and the alternator may not have been properly secured, possibly resulting in an electrical arc.
Consequence: An electrical arc can increase the risk of a fire.
Remedy: Ford will notify owners, and dealers will inspect the alternator and starter motor power supply cables to verify that they are properly secured, correcting them as necessary, free of charge. The recall began September 26, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S25.
Electrical System:alternator/generator/regulator
Ford Motor Company (Ford) is recalling certain 2018 Ford Edge, Lincoln MKX, 2019 Ford Flex, and Lincoln MKT vehicles. The power supply cables at the starter and the alternator may not have been properly secured, possibly resulting in an electrical arc.
Consequence: An electrical arc can increase the risk of a fire.
Remedy: Ford will notify owners, and dealers will inspect the alternator and starter motor power supply cables to verify that they are properly secured, correcting them as necessary, free of charge. The recall began September 26, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S25.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2PE25007 · B-Pillar Trim Detachment
Opened Aug 7, 2025 · Closed Aug 5, 2026
Status: closed (inferred from source dates) · Structure:body:roof And Pillars
On August 7, 2025, the Office of Defects Investigation (ODI) opened PE25007 to investigate instances of B-pillar trim detachment in model year (MY) 2019 Ford Flex vehicles manufactured by Ford Motor Company. During the investigation, MY 2011-2018 Ford Flex vehicles were analyzed as peer vehicles, and subsequently incorporated into the subject population because they use B-pillar trim pieces that are substantially similar to those used on the MY 2019 Ford Flex vehicles. In July 2025, prior to the opening of PE25007, ODI and Ford met to discuss B-pillar trim detachment in Ford Flex vehicles. Ford reported that its warranty analysis indicated that Flex B-pillar trim had a low detachment rate and that Ford did not believe this condition posed an unreasonable risk to motor vehicle safety. In July 2025, Ford closed its internal investigation. Because ODI’s analysis of complaint data indicated a high failure rate and an increasing failure trend, PE25007 was subsequently opened. In responding to the information request for PE25007, Ford reassessed the warranty search criteria used in its July 2025 internal investigation. The reassessment found the detachment rate to be substantially higher than what Ford had originally determined. Consequently, in October 2025, Ford issued recall 25V732based on the reassessed and accurate high failure rate. This recall instructed dealers to inspect the driver and front passenger B-pillar trim pieces and repair/replace if necessary. The vehicles included in this recall were MY 2017-2019 Ford Flex with production dates between February 17, 2017 and December 2, 2019. In January 2026, Ford issued 25V732 Amendment 1, which updated the remedy to remove the inspection criteria and instead proactively secure the driver and front passenger B-pillar trim with adhesive. The scope of vehicles included in the recall was unchanged by Amendment 1. ODI’s analysis of 25V732 found that both the scope and remedy were insufficient and that an unreasonable safety risk remained despite the recall. MY 2016 Ford Flex was excluded from the recall scope and the rear B-pillar trims on both the driver and passenger side were excluded from the recall. The failure rates of both MY 2016 Ford Flex and rear B-pillar trim pieces were found to be higher than the failure rates in similar trim detachment recalls issued by both Ford and other vehicle manufacturers. Starting in January 2026, ODI and Ford had multiple meetings to discuss Ford’s PE25007 response data and ODI’s concern about the 25V732 scope and remedy. In June 2026, Ford issued 25V732 Amendment 2. This amendment expanded the scope of the recall to add MY 2016-2017 Ford Flex vehicles produced before February 17, 2017. Additionally, this amendment updated the remedy to include removal of and reapplication or replacement of both rear driver and rear passenger B-pillar trim pieces in addition to front driver and front passenger B-pillar trim pieces. This updated remedy applies to all MY 2016-2019 vehicles. Ford expects to complete the mailing of remedy owner notification letters by March 26, 2027. Also, Ford informed ODI that prior model year (MY 2011-2015) vehicles were referred to Ford’s Customer Satisfaction forum for consideration of an extended warranty program. In view of recall 25V732 and its associated amendments, ODI is closing this Preliminary Evaluation (PE). The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
PE24030 · Rear-view Camera Failure
Opened Oct 11, 2024 · Closed Feb 2, 2026
Status: closed (inferred from source dates) · Back Over Prevention: Sensing System: Camera
On October 11, 2024, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24030) to assess alleged failures of the rear-view camera in Model Year (MY) 2019 Ford Flex vehicles. Complaints submitted to NHTSA through Vehicle Online Questionnaires (VOQs), reviewed by ODI, report blank, distorted, or inverted rear-view camera images when in reverse. An inverted or upside-down image can provide false information to the driver increasing the risk of a crash. To date, ODI has received 85 VOQ complaints and additional EWR Field Reports with these allegations for MY 2019 Ford Flex vehicles. During the investigation, ODI found that the MY 2019 Ford Flex vehicle and certain peer vehicles including MY 2015-2018 Flex, MY 2019 Fiesta, Taurus, and Lincoln MKT vehicles are equipped with Magna analog rear-view-only cameras. On December 20, 2024, Ford filed Recall 24V-951 covering 30,715 MY 2019 Ford Flex, Ford Fiesta, and Lincoln MKT vehicles in which the rear-view camera may intermittently display a blank or distorted image. The dealers will replace the rear-view camera for vehicles in the recall population. Per the recall chronology, teardown of three cameras identified fractured solder joints between the microcontroller and the printed circuit board. Ford indicated that other causal factors are being investigated and asserted that the defect is contained within the camera. ODI found that certain peer vehicles excluded from Recall 24V-951 showed a high rate of VOQ complaints. Also, ODI identified reports produced by Ford that indicate the peer vehicles have the same issue as the subject vehicles. To address ODI’s concern, Ford analyzed some field-returned cameras, as well as Ford’s field data and ODI’s VOQ data. Ford stated it did not identify a specific root cause in the Magna supplied cameras. However, on October 13, 2025, Ford filed Recall 25V-695 covering 1,448,655 vehicles of various Ford/Lincoln models equipped with Magna supplied cameras. The cameras demonstrate the same blank or distorted images that prompted Recall 24V-951. It should be noted that Ford is conducting a recall of those vehicles by model/model year that exhibit VOQ complaint rates greater than 10 per 100,000 vehicles. For the remaining vehicles (rates less than 10/100K), Ford is providing a warranty extension (15 years/unlimited miles). Ford has stated that the differences in the rates (field performance) are likely due to the differences in the camera related hardware, such as the wiring harness type that are specific by vehicle model/model year. In view of Ford filing Recall 24V-951 and Recall 25V-695 addressing the subject of this investigation, ODI is closing this Preliminary Evaluation. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Back Over Prevention: Sensing System: Camera
On October 11, 2024, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24030) to assess alleged failures of the rear-view camera in Model Year (MY) 2019 Ford Flex vehicles. Complaints submitted to NHTSA through Vehicle Online Questionnaires (VOQs), reviewed by ODI, report blank, distorted, or inverted rear-view camera images when in reverse. An inverted or upside-down image can provide false information to the driver increasing the risk of a crash. To date, ODI has received 85 VOQ complaints and additional EWR Field Reports with these allegations for MY 2019 Ford Flex vehicles. During the investigation, ODI found that the MY 2019 Ford Flex vehicle and certain peer vehicles including MY 2015-2018 Flex, MY 2019 Fiesta, Taurus, and Lincoln MKT vehicles are equipped with Magna analog rear-view-only cameras. On December 20, 2024, Ford filed Recall 24V-951 covering 30,715 MY 2019 Ford Flex, Ford Fiesta, and Lincoln MKT vehicles in which the rear-view camera may intermittently display a blank or distorted image. The dealers will replace the rear-view camera for vehicles in the recall population. Per the recall chronology, teardown of three cameras identified fractured solder joints between the microcontroller and the printed circuit board. Ford indicated that other causal factors are being investigated and asserted that the defect is contained within the camera. ODI found that certain peer vehicles excluded from Recall 24V-951 showed a high rate of VOQ complaints. Also, ODI identified reports produced by Ford that indicate the peer vehicles have the same issue as the subject vehicles. To address ODI’s concern, Ford analyzed some field-returned cameras, as well as Ford’s field data and ODI’s VOQ data. Ford stated it did not identify a specific root cause in the Magna supplied cameras. However, on October 13, 2025, Ford filed Recall 25V-695 covering 1,448,655 vehicles of various Ford/Lincoln models equipped with Magna supplied cameras. The cameras demonstrate the same blank or distorted images that prompted Recall 24V-951. It should be noted that Ford is conducting a recall of those vehicles by model/model year that exhibit VOQ complaint rates greater than 10 per 100,000 vehicles. For the remaining vehicles (rates less than 10/100K), Ford is providing a warranty extension (15 years/unlimited miles). Ford has stated that the differences in the rates (field performance) are likely due to the differences in the camera related hardware, such as the wiring harness type that are specific by vehicle model/model year. In view of Ford filing Recall 24V-951 and Recall 25V-695 addressing the subject of this investigation, ODI is closing this Preliminary Evaluation. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Back Over Prevention: Sensing System: Camera
On October 11, 2024, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24030) to assess alleged failures of the rear-view camera in Model Year (MY) 2019 Ford Flex vehicles. Complaints submitted to NHTSA through Vehicle Online Questionnaires (VOQs), reviewed by ODI, report blank, distorted, or inverted rear-view camera images when in reverse. An inverted or upside-down image can provide false information to the driver increasing the risk of a crash. To date, ODI has received 85 VOQ complaints and additional EWR Field Reports with these allegations for MY 2019 Ford Flex vehicles. During the investigation, ODI found that the MY 2019 Ford Flex vehicle and certain peer vehicles including MY 2015-2018 Flex, MY 2019 Fiesta, Taurus, and Lincoln MKT vehicles are equipped with Magna analog rear-view-only cameras. On December 20, 2024, Ford filed Recall 24V-951 covering 30,715 MY 2019 Ford Flex, Ford Fiesta, and Lincoln MKT vehicles in which the rear-view camera may intermittently display a blank or distorted image. The dealers will replace the rear-view camera for vehicles in the recall population. Per the recall chronology, teardown of three cameras identified fractured solder joints between the microcontroller and the printed circuit board. Ford indicated that other causal factors are being investigated and asserted that the defect is contained within the camera. ODI found that certain peer vehicles excluded from Recall 24V-951 showed a high rate of VOQ complaints. Also, ODI identified reports produced by Ford that indicate the peer vehicles have the same issue as the subject vehicles. To address ODI’s concern, Ford analyzed some field-returned cameras, as well as Ford’s field data and ODI’s VOQ data. Ford stated it did not identify a specific root cause in the Magna supplied cameras. However, on October 13, 2025, Ford filed Recall 25V-695 covering 1,448,655 vehicles of various Ford/Lincoln models equipped with Magna supplied cameras. The cameras demonstrate the same blank or distorted images that prompted Recall 24V-951. It should be noted that Ford is conducting a recall of those vehicles by model/model year that exhibit VOQ complaint rates greater than 10 per 100,000 vehicles. For the remaining vehicles (rates less than 10/100K), Ford is providing a warranty extension (15 years/unlimited miles). Ford has stated that the differences in the rates (field performance) are likely due to the differences in the camera related hardware, such as the wiring harness type that are specific by vehicle model/model year. In view of Ford filing Recall 24V-951 and Recall 25V-695 addressing the subject of this investigation, ODI is closing this Preliminary Evaluation. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Illustration