2021 Ford F-150 Hybrid

Hi, I have been trying to get Ford to address the recall 23V896 for over a year and they have been claiming that they dont have parts. They keep providing a different day that they are supposed to receive the parts but when the date comes they provide a different time. I need your assistance with getting this recall implemented.

The vehicle is currently at Kayser Automotive Group located at 2303 West Beltline Hwy Madison, WI 53713, their direct line is [XXX], since the diagnoses of the corrosion of the DCN. SYSTEMS & COMPONENTS THAT FAILED: A faulty or clogged engine bay drain plug failed to divert water, causing significant water accumulation that routed into the interior cabin. This water intrusion directly soaked interior carpeting and exposed the Data Communication Network (DCN) connector and Body Control Module (BCM) wiring harness to moisture, resulting in severe pin corrosion and electrical communication faults. The vehicle and all affected components are fully available for inspection upon request. SAFETY RISK: The DCN connector and Body Control Module control critical vehicle operations, exterior lighting, instrument clusters, and safety/driver-assistance systems. Water corrosion on these communication buses causes unpredictable, uncommanded electrical failures and module communication dropouts while operating the vehicle at speed, creating a severe crash hazard to occupants and surrounding traffic. DEALER CONFIRMATION & INSPECTIONS: The issue was physically inspected and confirmed by an authorized Ford dealership service department, Kayser Automotive Group located at 2303 West Beltline Hwy Madison, WI 53713. Dealership technicians verified the water accumulation path, identified the faulty/clogged drain pathway, and documented physical corrosion on the DCN wiring connector. A Technical Assistance Center (TAC) case was requested to escalate the defect to Ford Corporate. WARNING LAMPS & PRIOR SYMPTOMS: Initial symptoms appeared as heavily saturated interior floor carpets and standing water pooling near the cowl/dash area. Shortly thereafter, intermittent electrical glitches, warning lamps on the instrument cluster, and network communication Diagnostic Trouble Codes (DTCs) appeared as the corrosion worsened. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The computer system malfunctioned; the front panel warning was "Stop vehicle and check regen. brakes". I put my car in drive and when I hit the gas pedal the car reversed instead of going forward. I got it towed to the dealer at Piazza Hyundai in Limerick PA. The service did not provide me with an explanation about the warning and showed little concerns to the issues, I was given a month time frame for looking at my car. I consider this a safety issue as the car did not respond appropriately to D and R, I suspect a computer failure.

Transmission kept slipping out on the freeway. Led to a near accident. Then ended up broken down on a highway while towing a trailer. Transmission couldn’t find gear for the next serval times we tried to place in gear. Then on the third time it went into gear and started driving again only to slip out and lead to another breakdown on the highway. Still had to drive it into dealership in its unsafe condition.

My truck because of the transmission and it's "powertrain" faults; puts itself in low power mode. I can be driving fine, stop for a red light, to turn a corner or before pulling into oncoming traffic leaving a parking lot etc and without warning, no power. It won't go over 5-10 miles an hour. You have to let off the gas and give gas sometimes more than once to get the truck to finally pick up and go. I have almost been hit countless times because I suddenly couldn't get out of the way of oncoming traffic. The dealer has confirmd to me a few times that this is a transmission issue that is sending my powerboost into low power mode. I believe he said the tech that drove it said it was dangerous; but a known issue. Started a few years ago and doesn't happen all the time. Occurs sporadically and lately more and more frequently.

On numerous occasions, with increasing frequency, the truck has suddenly not responded to pressing the throttle pedal. I have not figured out the exact situation that makes it happen. From the best of my knowledge I am not sure exactly what induces the issue. I have noticed it several times where the truck goes from a mid range RPM (consistent with normal driving conditions) then after the brake or natural deceleration occurs and you go to reengage the throttle pedal the truck does not respond. There is a very extended delay to any speed increases. This has been extremely dangerous when making left turns through traffic as the truck does not respond and leaves you in harms way. It has been happening several times a week now and I have read numerous reports of the same thing on forums. I see no warning lights or pop ups that can support a large issue.

My cluster gauge is turning off while I’m driving and turning on after by itself. It happened too many times maybe 20 times in last 2 months. When this happens I’m loosing all my settings I have done before. While it’s off I can’t see any information including my speed and distracting me. I share this issue on platforms and too many people having same issue. I found too many video on YouTube about exact same problem. It happens on the f150 trucks with digital cluster gauge produced after 2020 and even brand new ones having same issue still problem is ongoing. Ford and ford dealerships aware of the problem but they aren’t doing anything about this and they say it’s well known issue.

I purchased a 2021 Ford F-150 Powerboost Lariat in November 2022. It was advertised as a Gold Certified Used vehicle. In October I stopped and put the truck in park, and when I got back in the truck it wouldn’t shift out of Park. The Message in the instrument panel said to shift into Park to start. However, the shift lever was stuck in Park with the yellow light flashing next to P. I had to spend $100 to have my truck towed to Young Ford in Ogden, Utah which is the closest dealership to my home. They had my truck there for two days and then called me and let me know my truck was ready to be picked up. They told me the problem was a software update and once they had completed the update, everything was working fine. They then charged me approximately $360 for the update. So essentially, I just spent $460 for a software update on my truck that is set to automatically download and install updates several times each week. The technician at the dealership checked my vehicle history and verified that I was up to date with all available updates. In just under two years of ownership, I have now had to take it to the dealership twice for software updates, and even more times for multiple recalls. This latest issue is infuriating because a simple software upgrade cost me two days of use, towing charges, and $360 to diagnose and download the update. Why does a software update completely disable a vehicle, and why is it not Ford’s responsibility? What if this happened during driving on the freeway? I should not have to take it to the dealership to be updated so that the vehicle will operate. In my mind this is no different than a recall. If a car becomes inoperable because of a problem from the dealer than the dealer should be financially responsible and not pass those costs to the consumer!

There hasn't been an incident yet. But, I want a record of this somewhere. I'm assuming there may be an incident in the future; and, I'm concerned about that. Either an incident with my truck or an incident with the 100s of thousands of Ford and Lincoln vehicles from 2017-2023 that have this issue. The issue is Ford SSM 51939 - a whining noise coming from the bellhousing and the front of the transmission fluid pan. I have taken my truck to a dealership. I have called Ford about this. I have researched extensively online. I have called NHTSA. I have emailed the Office of Vehicle Safety Compliance. I am now filing this report online. The safety issue? For me, I'm now having to wear EARPLUGS when driving my vehicle. For others, they have been told to turn up the radio. I am now hearing the noise all the time -- believe it or not, even sometimes when I'm not even in my truck. Ford needs to address this. They send me to you. I don't have the 'option' of TRADING IN MY VEHICLE...others don't either. What am I to do? When something serious happens because people are remedying this themselves...it will be a very sad day. But, maybe only then will Ford do something. I don't know what else to do other than call Ford everyday, and email every agency that may be able to apply some pressure. Sadly, I have a full-time job...and this is really frustrating for me, in more ways that one. Hope you have a nice day! [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Battery drain issue caused by over the air updates causing Low Battery warnings to occur. This issue has been repeatedly looked at and brought to the dealership since purchase. Alternator replaced at dealership. Battery replaced at dealership. Updates forced by dealership, multiple times. Battery minder installed to ensure start during winter months due to constant BMS warnings of 12V Battery State of Charge Low and infotainment Low Power Mode notifications. OTA update currently causing this issue. Attempted to clear by personally, by plugging battery minder in overnight for consecutive nights, prior to booking 40k mile service with dealership. Brought in for service, found battery state of charge reading below 50%. Recovered to above 70%. Requested I let the OTA attempt to complete overnight. OTA has continued to fail for the last 3 days, even while on the battery minder. Vehicle is driven at least 1 hour per day. BMS sensor installed: ML3T-10C652-BA. Due to the power consumption reduction saving functions of the system, low power mode causes functions and features of the vehicle to slowly turn off and support only the driver access when in low power mode. This includes terminating the gateway module that the OTA update is required to verify and validate completion with. This also changes reported settings in the infotainment system to appear as if the driver has deactivated WiFi, causing an inaccurate assessment of issues by technicians. A low enough state of charge, even when inaccurate, can cause the vehicle to fail to start.