2017 Ford Escape

The contact owns a 2017 Ford Escape. The contact stated that the vehicle was involved in a collision. The contact stated while driving at an undisclosed speed and depressing the accelerator pedal two days later, the vehicle lurched forward and hesitated to respond. The contact stated that the vehicle failed to exceed 30 MPH. Additionally, the RPM was revving significantly. The check engine warning light was illuminated. The contact stated that the failure recurred intermittently while driving. The vehicle was taken to the dealer, where it was diagnosed that the high-pressure fuel pump (HPFP) tappet had fractured and caused metal pieces intrusion into the engine, fractured unknown parts, and blocked the oil flow. The dealer determined that the engine needed to be replaced and that the failure was not related to the accident. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was 70,000.

The contact owns a 2017 Ford Escape. The contact stated that on several occasions while in park(P), the vehicle rolled forward inadvertently. The contact stated that the brake pedal was depressed twice and held down to stop the vehicle. Additionally, on several occasions, the contact observed an abnormal sound coming from the vehicle while driving at various speeds, and while the vehicle was idling, the vehicle was running rough. The vehicle was taken to an independent mechanic where it was diagnosed that the canister purge valve needed to be replaced. The vehicle was repaired approximately four times in one year; however, the failure persisted. The manufacturer was notified of the failure. The failure mileage was approximately 70,000.

The contact owns a 2017 Ford Escape. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated. The contact stopped the vehicle and checked the fluids, and the fluid levels were sufficient. The vehicle was driven to the residence. The vehicle was taken to an independent mechanic to be diagnosed. The independent mechanic retrieved DTC code: P0450. The vehicle was not repaired. The check engine warning light illuminated became illuminated again. The vehicle was taken back to the independent mechanic and the failure code P0450 was retrieved again. The dealer was contacted and made aware of the failure and the failure code information. The fault code identified a failure with the evaporative emissions system failure. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 122,089.

The contact owns a 2017 Ford Escape. The contact stated that while driving at unknown speeds downhill, the vehicle jerked, hesitated to accelerate, and stalled. The contact stated that the failure recurred while driving uphill, and the vehicle stalled; however, the vehicle was still running. The contact stated that upon depressing the accelerator pedal, the vehicle failed to respond as needed. The vehicle was restarted but the failure recurred. The contact stated that on another occasion while driving at an undisclosed speed, the vehicle jerked, and the check engine warning light illuminated. The check engine warning light illuminated for several days, and the failure recurred while driving at approximately 65 MPH. The failure occurred on several occasions. The vehicle was taken to an independent mechanic and was diagnosed with a fuel line failure. The vehicle was not repaired. The vehicle was then taken to another independent mechanic where it was diagnosed with unknown failures and recommended that the vehicle be taken to the dealer due to the failure being related to a possible recall. The manufacturer was not made aware of the failure. The failure mileage was unknown.

The contact owns a 2017 Ford Escape. The contact stated that after refueling the vehicle, the vehicle was difficult to start while still at the pump. The contact stated while driving at various times, there was fumes coming from the vehicle with the check engine warning light illuminated. The contact took the vehicle to a local mechanic and was informed that the failure was due to the vehicle not having a gas cap. The vehicle was not repaired. At the suggestion of the mechanic, the contact attempted to use different grades of gasoline however, the failure persisted. The manufacturer was not made aware of the failure. The approximate failure mileage was 112,000.

The contact owns a 2017 Ford Escape. The contact stated that while at a traffic light or a stop sign, the vehicle jerked and jolted forward when the accelerator pedal was released. There were no warning lights illuminated. The vehicle was taken to the local dealer, where it was diagnosed that the purge valve was stuck open. The vehicle was repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline for assistance. The contact related the failure to NHTSA Campaign Number: 18V735000 (Fuel System, Gasoline). The failure mileage was approximately 72,239.

The contact owns a 2017 Ford Escape. The contact stated upon refilling the gas tank at the gas station and attempting to drive, he shifted from park (P) to drive (D), however, the vehicle failed to move. The check engine warning light was illuminated. The contact was able to drive the vehicle after turning off and restarting the vehicle several times. The check engine warning light was illuminated. The contact stated that the failure had been reoccurring after refilling the gas tank. The vehicle was taken to an unknown dealer who provided an unknown diagnostic. The vehicle was not repaired. The contact received a recall notification of NHTSA Campaign Number: 22V413000 (Power Train), which he associated with the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time to complete the recall repair. The manufacturer was not made aware of the failure. The failure mileage was unknown. VIN tool confirms parts not available.

The contact owns a 2017 Ford Escape. The contact stated after refueling the vehicle, she was unable to start the vehicle. The contact stated that the check engine warning light was illuminated. The contact stated she had to leave the vehicle running while refueling to not experience the failure. The contact took the vehicle to the local dealer, where it was diagnosed with needing the purge valve replaced. The vehicle was not repaired because the parts were not available. The contact continued to experience the failure. The manufacturer had been informed of the failure. The failure mileage was unknown.

I put 20 bucks worth of gas in the tank. Start to drive off then my engine would not start. In order to get it to run I had to hold the gas pedal down and put it in gear finally it started running the check engine light came on during this. I have a code reader at home which I have for an old Ford Taurus I used to check my code out. The first time and came back as P1450 or unable to bleed up fuel tank vacuum. I thought maybe I got bad gas so I cleared it but not permanently. I drove it for a few miles the check engine light did not come on. Then when I shut it off and turn it back on the check engine light came back on. I checked YouTube and Google where it seems that the purge valve is a common problem with these vehicles. In fact all the way back to at least 2013 from what my memory serves me today after watching a few videos last night. I have looked for parts for this particular component which will probably run around $85 and aftermarket at your local AutoZone. I prefer buying manufacturer parts from Ford the company itself. I am filing a complaint because I admissions valve should not be going bad this quick with 85,000 miles on the vehicle. I am afraid to drive the vehicle much until it is fixed. I drive a mile and back daily for my son for school and I only have one vehicle. My family has bought Fords predominantly throughout my lifetime. Other than one heater core and common maintenance is all I ever had to do these vehicles been good quality. Thank you for your time.

My 2017 Ford Escape’s check engine light turned on 02/24/2022. The next day I fueled up the vehicle and when I attempted to start vehicle it misfired and I had to try starting it multiple times. I went to Auto zone to have the light read and was told error code P1450 was the reason for issues. I made an appointment with the Ford Delear I purchased the vehicle from. The delear explained that the SUV’s purge Cannister Valve was bad and that is why my engine was Misfiring after fueling up. I was told the part would be here within 2 days. After about 4 days I was told no eta on parts and that the issue was with transportation on part but that it will be here soon. I called a different Ford delearship in town and when they looked up my vin the explained that the part was recalled by Ford as it was faulty and they didn’t know when it would be fixed. I then attempted to take my car to a different mechanic shop and had them look at the aftermarket supply for the part and we were advised that Ford Motor Company has a nationwide shortage on this part and has a demand/priority with aftermarket manufacturers to suppply Ford’s needs first and that no clue as to when this would happen as this is affecting all escape owners with this part issue. We also learned from inquiring with aftermarket part manufacturing that in just in the Northeast part of our state there are over 1100 Ford escapes waiting for the same part as well and that the shortage just happened recently as many Ford escapes recently reported having a bad Cannister Purge Valve. Looking at how this has progressed and how the engine misfires after fueling up due to faulty Cannister purge valve i am asking for an investigation into this issue since this is part of the vehicles emission system and can lead to engine issues due to misfires as we are not able to utilize the vehicle out of fear that it won’t start or misfires potentially causing other system issues down the line.