THERE IS A NHTSA RECALL NUMBER: 17V-821, MANUFACTURER RECALL NUMBER: T79 RECALL DATE: DECEMBER 20, 2017. WHEN I CALLED MOPAR TODAY TO SEE WHAT THE STATUS IS THEY TOLD ME THE MANUFACTURER STILL DOES NOT HAVE A REPLACEMENT PART AND ADDED ME TO A LIST TO BE NOTIFIED WHEN IT COMES IN (SEE ATTACHED LIVE ASSISTANCE EXCHANGE). THE SOLU…
Read full complaint
THERE IS A NHTSA RECALL NUMBER: 17V-821, MANUFACTURER RECALL NUMBER: T79 RECALL DATE: DECEMBER 20, 2017. WHEN I CALLED MOPAR TODAY TO SEE WHAT THE STATUS IS THEY TOLD ME THE MANUFACTURER STILL DOES NOT HAVE A REPLACEMENT PART AND ADDED ME TO A LIST TO BE NOTIFIED WHEN IT COMES IN (SEE ATTACHED LIVE ASSISTANCE EXCHANGE). THE SOLUTION IN THE INTERIM IS TO SET THE PARKING BRAKE. UNFORTUNATELY WHEN WE USE THE PARKING BRAKE IT BECOMES DIFFICULT TO SHIFT OUT OF PARK. THE DEALERSHIP DOES NOT HAVE A SOLUTION FOR THIS PROBLEM, SO WE STOPPED USING THE PARKING BRAKE. THIS LEAVES US WITH A DEFECTIVE VEHICLE. WE ARE UNABLE TO USE OUR 5TH WHEEL BECAUSE WE ARE CONCERNED THAT WE WILL BE STUCK SOMEWHERE AND NOT BE ABLE TO SHIFT OUT OF PARK. THIS RESOLUTION IS TAKING TOO LONG. I HAVE NOTED THE DATE THE PROBLEM STARTED WITH THE PARKING BRAKE.
NHTSA ODI #11093197
Mileage unknown · Apr 19, 2018
Power TrainService Brakes
2011 DODGE RAM 3500. CONSUMER WRITES IN REGARDS TO BRAKE TRANSMISSION SHIFT INTERLOCK SAFETY RECALL.. *LD THE CONSUMER STATED THE VEHICLE WAS PLACED INTO PARK WITH THE ENGINE RUNNING AND THE PARKING BRAKE ON. THE VEHICLE ROLLED ACROSS THE HIGHWAY AND INTO IN ELECTRICAL POLE. THERE WAS A RECALL RELATED TO THE FAILURE, BUT THE …
Read full complaint
2011 DODGE RAM 3500. CONSUMER WRITES IN REGARDS TO BRAKE TRANSMISSION SHIFT INTERLOCK SAFETY RECALL.. *LD THE CONSUMER STATED THE VEHICLE WAS PLACED INTO PARK WITH THE ENGINE RUNNING AND THE PARKING BRAKE ON. THE VEHICLE ROLLED ACROSS THE HIGHWAY AND INTO IN ELECTRICAL POLE. THERE WAS A RECALL RELATED TO THE FAILURE, BUT THE PARTS WERE UNAVAILABLE.*JS
NHTSA ODI #11089408
170,000 miles · Jul 5, 2017
Service BrakesSteering
LOST MY BRAKES AND STEERING WHILE DRIVING DOWN THE HWY DOING 65. LOST ALL BRAKE POWER AND POWER STEERING.THE MOTOR RUNS BUT HAVE NO BRAKES AND POWER STEERING. LOOKING AT IT I'M NOT THE ONLY ONE WHO HAS HAD THIS PROBLEM. I HAVE 2 YOUNG KIDS AND THEY COULD HAVE BEEN BADLY HURT IF I WASN'T ABLE TO MAN HANDLE THE TRUCK. DEFINITELY A…
Read full complaint
LOST MY BRAKES AND STEERING WHILE DRIVING DOWN THE HWY DOING 65. LOST ALL BRAKE POWER AND POWER STEERING.THE MOTOR RUNS BUT HAVE NO BRAKES AND POWER STEERING. LOOKING AT IT I'M NOT THE ONLY ONE WHO HAS HAD THIS PROBLEM. I HAVE 2 YOUNG KIDS AND THEY COULD HAVE BEEN BADLY HURT IF I WASN'T ABLE TO MAN HANDLE THE TRUCK. DEFINITELY A SAFETY ISSUE THAT NEEDS TO BE LOOKED INTO. NOT SURE WHAT IS CAUSING IT. IS THERE ANYTHING YOU CAN DO TO LOOK INTO THIS CAUSE NOW I'M SCARED TO DRIVE MY TRUCK. ESPECIALLY WITH MY KIDS IN IT. I'M NOT SURE WHAT CAN BE DONE ABOUT THIS BUT I WOULD REALLY HATE TO SEE SOMETHING BAD HAPPEN TO A FAMILY FOR A ISSUE LIKE THIS. I THANK YOU FOR YOUR TIME AND I HOPE TO HEAR A RESPONSE BACK FROM YOU ABOUT THIS ISSUE.
NHTSA ODI #11003078
69,000 miles · Sep 8, 2015
Service BrakesSteering
WHILE HAULING A LARGE LOAD OF HAY, I WAS TRAVELING AT LESS THAN 10MPH AS I WAS APPLYING THE BRAKES TO SLOW THE VEHICLE TO MAKE A RIGHT HAND TURN ON TO ANOTHER ROAD. WHEN I APPLIED THE BRAKES THE STEERING COMPLETELY WENT AWAY AND THE VEHICLE WOULD NOT TURN AT ALL. THE BRAKE PEDDLE WAS VERY STIFF AND THE BRAKES WERE NOT VERY RESPO…
Read full complaint
WHILE HAULING A LARGE LOAD OF HAY, I WAS TRAVELING AT LESS THAN 10MPH AS I WAS APPLYING THE BRAKES TO SLOW THE VEHICLE TO MAKE A RIGHT HAND TURN ON TO ANOTHER ROAD. WHEN I APPLIED THE BRAKES THE STEERING COMPLETELY WENT AWAY AND THE VEHICLE WOULD NOT TURN AT ALL. THE BRAKE PEDDLE WAS VERY STIFF AND THE BRAKES WERE NOT VERY RESPONSIVE. I WAS ABLE TO GET THE TRUCK STOPPED AS I WAS HEADING TOWARD ANOTHER VEHICLE ON THE ROAD. AFTER COMING TO A COMPLETE STOP AND BACKING THE VEHICLE UP THE STEERING RETURNED AND I WAS ABLE TO MAKE THE TURN. I TRAVELED APPROXIMATELY 2 MILES DOWN THE ROAD TO MY DESTINATION AT A VERY SLOW SPEED AND WHEN I APPLIED THE BRAKES TO TURN I LOST ALL STEERING AGAIN AND THE BRAKE PEDDLE WAS VERY STIFF AND NOT VERY RESPONSIVE. I PARKED THE VEHICLE AND HAVE NOT MOVED IT.
NHTSA ODI #10762200
89,770 miles · Jul 7, 2015
Service BrakesSteering
THE UPPER STEERING HOSE INNER PLASTIC TUBE BECOMES LOOSE OR BREAKS AND LODGES INTO THE METAL FITTING WHICH CAUSES A LOUD HISSING NOISE UNDER THE STERRING WHEEL. BECAUSE IT IS ALSO CONNECTED TO THE BRAKES, THE PEDAL BECOMES UNSAFELY SOFT. DODGE/RAM NEEDS TO RECALL THIS AS IT A KNOWN ISSUE ALL OVER THE INTERNET AND BECOMES A REA…
Read full complaint
THE UPPER STEERING HOSE INNER PLASTIC TUBE BECOMES LOOSE OR BREAKS AND LODGES INTO THE METAL FITTING WHICH CAUSES A LOUD HISSING NOISE UNDER THE STERRING WHEEL. BECAUSE IT IS ALSO CONNECTED TO THE BRAKES, THE PEDAL BECOMES UNSAFELY SOFT. DODGE/RAM NEEDS TO RECALL THIS AS IT A KNOWN ISSUE ALL OVER THE INTERNET AND BECOMES A REAL DANGER WHEN BRAKING HARD OR TOWING.
NHTSA ODI #10732524
10,000 miles · Oct 9, 2014
Service Brakes
THE OEM INTEGRATED ELECTRONIC TRAILER BRAKE CONTROLLER WILL NOT APPLY POWER TO THE BRAKES ON THE TOWED VEHICLE WHEN DEPRESSING THE TOW VEHICLE FOOT BRAKE. YOU MUST MANUALLY SLIDE THE BRAKE CONTROLLER LEVER IN ORDER TO ACTUATE THE SYSTEM. VERY DANGEROUS WHEN TOWING A CAMPER, TRAILER, ETC. I HAVE TAKEN MY TRUCK IN TWICE TO THE …
Read full complaint
THE OEM INTEGRATED ELECTRONIC TRAILER BRAKE CONTROLLER WILL NOT APPLY POWER TO THE BRAKES ON THE TOWED VEHICLE WHEN DEPRESSING THE TOW VEHICLE FOOT BRAKE. YOU MUST MANUALLY SLIDE THE BRAKE CONTROLLER LEVER IN ORDER TO ACTUATE THE SYSTEM. VERY DANGEROUS WHEN TOWING A CAMPER, TRAILER, ETC. I HAVE TAKEN MY TRUCK IN TWICE TO THE DEALER: THE FIRST TIME THEY COULD NOT FIND ANYTHING WRONG; THE SECOND TIME, THEY REPLACED THE CONTROLLER W/ A NEW ONE. IT PERFORMS EXACTLY THE SAME--THAT IS, IT DOESN'T. THEY ASSURE ME IT IS WORKING AS DESIGNED. THEY ALSO SUGGESTED IT WAS MY TRAILER. HOWEVER, IT DOES NOT MATTER WHAT TRAILER I AM TOWING, IT DOES NOT WORK. ALL OF MY TRAILERS BRAKE FINE WHEN HOOKED TO OTHER TOW VEHICLES. *TR
NHTSA ODI #10643545
15,600 miles · Dec 1, 2013
Service BrakesSteering
POWER ASSIST FOR BRAKES AND STEERING IS LOST AT APPROXIMATELY 20-25 MPH WHEN SLOWING DOWN FOR LIGHTS, TURNS, ETC., REQUIRING SIGNIFICANT MANUAL EFFORT TO CONTROL THE TRUCK. POWER WILL RETURN AFTER ACCELERATING FROM STOP OR SLOW TURN BUT GO OUT AGAIN WHEN SPEED IS REDUCED TO 20-25 MPH. *TR
NHTSA ODI #10554247
13,321 miles · Jul 16, 2013
Service BrakesSteeringSuspension
"DEATH WOBBLE" - I HIT A BUMP WITH THE RIGHT FRONT TIRE. I WAS DOING 40-45 MPH AT THIS TIME. THE TRUCK FRONT END STARTED TO VIOLENTLY SHAKE, AND THEN THE REAR STARTED TO BOUNCE. I WAS IN THE CENTER LANE WHEN THIS HAPPENED WITH TRAFFIC ON ALL SIDES. I APPLIED THE BRAKES AND TRIED TO STEER TO THE RIGHT, THE TRUCK CONTINUE TO G…
Read full complaint
"DEATH WOBBLE" - I HIT A BUMP WITH THE RIGHT FRONT TIRE. I WAS DOING 40-45 MPH AT THIS TIME. THE TRUCK FRONT END STARTED TO VIOLENTLY SHAKE, AND THEN THE REAR STARTED TO BOUNCE. I WAS IN THE CENTER LANE WHEN THIS HAPPENED WITH TRAFFIC ON ALL SIDES. I APPLIED THE BRAKES AND TRIED TO STEER TO THE RIGHT, THE TRUCK CONTINUE TO GO STRAIGHT, AND THEN STARTED TO GO SIDEWAYS TO THE LEFT. ONCE MY SPEED DROPPED BELOW 5 MPH IS WHEN I REGAINED CONTROL OF MY TRUCK THIS INCIDENT WAS TERRIFYING, AND ALMOST CAUSED A SERIOUS ACCIDENT. ARE THEY (CHRYSLER/RAM) WAITING FOR SOMEONE TO DIE? IF YOU SEARCH ON THIS SITE FOR "DEATH WOBBLE" THEN FILTER 2011 RAM 3500 YOU COME UP WITH 125 REPORTS FOR THE 3500 SERIES TRUCK FROM 2011 - 2013. THAT IS 125 INCIDENTS. WHEN IS SOMEONE GOING TO DO SOMETHING ABOUT THIS. I HAVE REPORTED THIS TO CHRYSLER, ALONG WITH THOUSANDS OF OTHERS, AND WE ARE GETTING NO WHERE. *TR
NHTSA ODI #10525183
600 miles · Apr 16, 2013
Service Brakes
TL* THE CONTACT OWNS A 2011 DODGE RAM 3500. THE CONTACT STATED THAT WHILE DRIVING APPROXIMATELY 65 MPH, THE CONTACT ATTEMPTED TO DECELERATE BUT THE VEHICLE CONTINUED TO ACCELERATE UNTIL AFTER REPEATEDLY ENGAGING THE BRAKES WITH FORCE. THE FAILURE OCCURRED WHENEVER A HITCHED TRAILER WAS BEING TOWED. THE VEHICLE WAS TAKEN TO AN AU…
Read full complaint
TL* THE CONTACT OWNS A 2011 DODGE RAM 3500. THE CONTACT STATED THAT WHILE DRIVING APPROXIMATELY 65 MPH, THE CONTACT ATTEMPTED TO DECELERATE BUT THE VEHICLE CONTINUED TO ACCELERATE UNTIL AFTER REPEATEDLY ENGAGING THE BRAKES WITH FORCE. THE FAILURE OCCURRED WHENEVER A HITCHED TRAILER WAS BEING TOWED. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER TEN TIMES FOR THE SAME FAILURE. THE TECHNICIAN INFORMED THE CONTACT THAT THE INCORRECT BRAKE SYSTEM WAS INSTALLED IN THE VEHICLE. THE MANUFACTURER WAS NOT NOTIFIED OF THE PROBLEM. THE VEHICLE HAD NOT BEEN REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 600.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Consequence & remedy
Consequence: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy: Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger Police vehicles, 2007-2013 RAM 3500 Cab Chassis, 2008-2013 RAM 4500 and 5500 Cab Chassis, and 2013 RAM 2500 and 3500 vehicles. The affected vehicles have a 220 amp alternator that may suddenly fail.
Consequence & remedy
Consequence: If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash. There is also the possibility that the alternator may short circuit, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the alternator with a revised alternator, free of charge. The recall began on December 23, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S68.
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Consequence & remedy
Consequence: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Additional source detail variants (2)
Fuel System, Diesel
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Consequence: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Engine And Engine Cooling:engine:diesel
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Consequence: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 RAM 2500 4X4 and 3500 4X4 trucks, 2008-2012 Dodge RAM 3500 4x2 Cab Chassis, and model year 2008 Dodge RAM 1500 Mega Cab 4x4. The left tie rod assembly may break.
Consequence & remedy
Consequence: A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
Remedy: Chrysler notified owners on January 16, 2014 that dealers would inspect vehicles and replace the steering linkage assembly, if necessary. On or about February 27, 2014, Chrysler ceased its recall remedy program due to parts quality concerns, and then re-initiated it on or about April 14, 2014. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N49.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2011 DODGE RAM 2500/3500 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; MODEL YEAR 2008-2011 DODGE RAM 3500 CAB CHASSIS 4X2, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; AND MODEL YEAR 2008 DODGE RAM 1500 MEGA CAB 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH AUGUST 15, 2008, BECAUSE THE LEFT TIE ROD BALL STUD MAY FRACTURE. THIS CONDITION TENDS TO OCCUR DURING LOW SPEED PARKING LOT TYPE MANEUVERS WHEN THE CUSTOMER IS MAKING A TIGHT TURN. ADDITIONALLY, MODEL YEAR 2003-2008 DODGE RAM 2500/3500 VEHICLES MAY HAVE RECEIVED THE AFFECTED TIE ROD ASSEMBLY AS A REPLACEMENT PART DURING NORMAL SERVICE.
Consequence & remedy
Consequence: THIS CONDITION COULD RESULT IN THE POTENTIAL LOSS OF DIRECTIONAL STABILITY IN THE LEFT HAND FRONT WHEEL, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT THE TIE ROD ENDS FOR RELATIVE ORIENTATION AND REPLACE THE LEFT OUTER TIE ROD AS REQUIRED AND PERFORM A FRONT END TOE ALIGNMENT AS NEEDED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 3, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EA19001 · Electrical Overstress
Opened Apr 19, 2019 · Closed Sep 19, 2024
Status: closed (inferred from source dates) · Air Bags: Air Bag/restraint Control Module
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.
2011 Dodge RAM 3500 Problems, Complaints & Recalls | Skip That Year
Illustration