IllustrationSTEERING COUPLING BROKE CAUSING LOSS OF CONTROL AFTER RECALL REPAIR.
1988 Dodge Dakota
Owner reports · Recalls · Investigations
Fewer warning signs than most model years
Owner complaints for the 1988 Dodge Dakota are lower than the model-year median of 166.
About this comparison →How this year compares
Owner complaints by model year
Compare all Dakota years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 2 of 55 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Steering. Review the 26 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Power Train. Review the 10 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine And Engine Cooling. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
2 crash reports2 fire reports0 injury reports
What owners actually said
55 reportsRECEIVED RECALL NOTICE (#96V094000) RACK AND PINION STEERING. CALLED DEALER & TOOK VEHICLE IN TO THE MECHANIC. WAS TOLD NEEDED TO WAIT FOR SPECIAL WELDER & WOULD NOTIFY OWNER. RECEIVED ANOTHER RECALL NOTICE. CALLED BACK TO DEALER. MECHANIC AGAIN SAID NEEDED TO WAIT WITH OTHER VEHICLES FOR WELDER SPECIALIST TO DO THE REPAIRS ON …
Read full complaint
RECEIVED RECALL NOTICE (#96V094000) RACK AND PINION STEERING. CALLED DEALER & TOOK VEHICLE IN TO THE MECHANIC. WAS TOLD NEEDED TO WAIT FOR SPECIAL WELDER & WOULD NOTIFY OWNER. RECEIVED ANOTHER RECALL NOTICE. CALLED BACK TO DEALER. MECHANIC AGAIN SAID NEEDED TO WAIT WITH OTHER VEHICLES FOR WELDER SPECIALIST TO DO THE REPAIRS ON STEERING. *AK
RACK AND PINION BOLTS BROKE LOOSE AND CAUSED RACK AND PINION TO GO BAD, BUSHING FAILED CAUSING FRONT END TO BE OUT OF LINE, REPLACE RACK AND PINION.
BELTS POPPED ON RIGHT FRONT TIRE (GOODYEAR WRANGLER HT- TIRE SIZE P235/75R15- DOTMKHLTH2R392)CAUSING VEHICLE TO VIBRATE AND JACKNIFE RESULTING IN DAMAGE TO THE VEHICLE BEING TOWED BEHIND TRUCK. NLM
RECALL 96V094000. DLR REFUSES TO SERVE RECALL BECAUSE TRUCK WAS DIRTY. *AK
CONSUMER STATES THAT THE VEHICLE WAS INCLUDED IN A RECALL ON THE RACK AND PINION MOUNT; MANUFACTURER RECALL # 688, NHTSA RECALL#96V094. THE RACK AND PINION STEERING WAS DAMAGED DURING RECALL REPAIR, SO HE NOTIFIED THE SERVICE MANANGER ABOUT THE PROBLEM. THE SERVICE MANAGER INFORMED HIM THAT THE LOWER STEERING COUPLER HAD …
Read full complaint
CONSUMER STATES THAT THE VEHICLE WAS INCLUDED IN A RECALL ON THE RACK AND PINION MOUNT; MANUFACTURER RECALL # 688, NHTSA RECALL#96V094. THE RACK AND PINION STEERING WAS DAMAGED DURING RECALL REPAIR, SO HE NOTIFIED THE SERVICE MANANGER ABOUT THE PROBLEM. THE SERVICE MANAGER INFORMED HIM THAT THE LOWER STEERING COUPLER HAD GONE BAD. OWNER HAD VEHICLE INSPECTED BY A ANOTHER MECHANIC, AND WAS TOLD THAT THE PART THAT WAS REPLACED BY THE DEALERSHIP DIDN'T NEED REPLACING. OWNER THEN CONTACTED THAT MANUFACTURER'S CUSTOMER SEVRICE LINE . *AK
THE STEERING WHEEL LOCKED, CAUSING ACCIDENT.
WAS DRIVING AND THE STEERING RACK AND PINION FELL OFF . *AK
RACK AND PINION DEFECTIVE.
OWNER RECEIVED RECALL NOTICE FOR RACK&PINION SYSTEM HE NOTES THAT REPAIRS WERE MADE BUT THE PROBLEM BECAME WORST
Official recalls
396V094000 · Steering:gear Box (other Than Rack And Pinion)
Jun 13, 1996
THE FRAME CAN CRACK AT THE STEERING GEAR ATTACHMENT AND/OR THE STEERING GEAR MOUNTING BOLTS CAN FRACTURE.
Consequence & remedy
Consequence: THE STEERING GEAR CAN SEPARATE FROM THE VEHICLE FRAME RESULTING IN A LOSS OF VEHICLE CONTROL INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
Remedy: DEALERS WILL ADD REINFORCEMENTS TO THE FRAME AND REPLACE THE STEERING GEAR MOUNTING BOLTS. IF THE FRAME IS ALREADY CRACKED, THE STEERING GEAR WELD NUTS WILL ALSO BE REPLACED.
88V074000 · Wheels:lugs/nuts/bolts/studs
May 4, 1988
MACHINING ERROR IN LOCATING WHEEL STUD HOLES MAY PREVENT FULL SEATING OF BRAKE DRUM TO SHAFT FLANGE.
Consequence & remedy
Consequence: WHEEL STUDS COULD LOOSEN, ALLOWING WHEEL TO SEPARATEFROM THE TRUCK.
Remedy: REPLACE AXLE SHAFTS AS NECESSARY.
87V194000 · Power Train:automatic Transmission:gear Position Indication (prndl)
Dec 26, 1987
AUTOMATIC TRANSMISSION MAY CONTAIN A PARK SPRAG ROD ASSEMBLY THAT MAY STICK IN THE TOOTH BUTT UNENGAGED POSITION.
Consequence & remedy
Consequence: THIS CONDITION COULD ALLOW THE VEHICLE TO ROLL WITH THEGEAR SHIFT LEVER IN PARK POSITION.
Remedy: ALL INVOLVED VEHICLES WILL HAVE THE PARK SPRAG ROD ASSEMBLIES REPLACED.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0No exact-year investigations in this snapshot.