NHTSA owner reports · September 18, 2026 snapshot.
What owners actually said
343 reports41,000 miles · Sep 6, 2016
Electronic Stability Control (esc)Service Brakes
WHEN DRIVING, I PRESSED BRAKE PEDAL TO STOP THE CAR AND HEARD A SCREECH NOISE, CAR TREMBLED A BIT AND CAME TO A STOP. WHEN I CONTINUED TO DRIVE WITHIN A COUPLE OF MINUTES THE ABS LIGHT CAME ON AND THE ELECTRICAL STABILITY LIGHT CAME ON. IT TURNED OFF FOR A COUPLE OF HOURS LATER, BUT IT TURNED ON AGAIN THE NEXT DAY IN THE MORNIN…
Read full complaint
WHEN DRIVING, I PRESSED BRAKE PEDAL TO STOP THE CAR AND HEARD A SCREECH NOISE, CAR TREMBLED A BIT AND CAME TO A STOP. WHEN I CONTINUED TO DRIVE WITHIN A COUPLE OF MINUTES THE ABS LIGHT CAME ON AND THE ELECTRICAL STABILITY LIGHT CAME ON. IT TURNED OFF FOR A COUPLE OF HOURS LATER, BUT IT TURNED ON AGAIN THE NEXT DAY IN THE MORNING WHEN I STARTED THE VEHICLE AND HAS STAYED ON SINCE.
NHTSA ODI #10903748
54,000 miles · Aug 23, 2016
Electrical SystemCrashInjury
VEHICLE LOST ALL POWER WHILE IN MOTION AT 60MPH. VEHICLE WOULD NOT STOP, WOULD NOT TURN BACK ON, SHIFT GEARS, ANYTHING. I WAS FORCED TO DRIVE THE VEHICLE OFF THE ROAD TO AVOID DEATH BY ACCIDENT. VEHICLE WAS TOWED TO LOCAL DODGE DEALERSHIP WHERE THEY DIAGNOSED THE VEHICLE WITH A FAILED TIPM. NOT COVERED UNDER WARRANTY AND NO ASSU…
Read full complaint
VEHICLE LOST ALL POWER WHILE IN MOTION AT 60MPH. VEHICLE WOULD NOT STOP, WOULD NOT TURN BACK ON, SHIFT GEARS, ANYTHING. I WAS FORCED TO DRIVE THE VEHICLE OFF THE ROAD TO AVOID DEATH BY ACCIDENT. VEHICLE WAS TOWED TO LOCAL DODGE DEALERSHIP WHERE THEY DIAGNOSED THE VEHICLE WITH A FAILED TIPM. NOT COVERED UNDER WARRANTY AND NO ASSURANCE THAT THIS WILL NOT HAPPEN AGAIN.
NHTSA ODI #10897966
8,500 miles · Aug 18, 2016
Unknown Or Other
SAFETY RECALL S03/NHTSA 16V-046. THE DEALER, PARKWAY CHRYSLER DODGE, IN CLINTON TWP., MICHIGAN FAILED TO REMEDY THIS DEFECT WITHIN A REASONABLE TIME. I FIRST NOTIFIED THE DEALER ON 4/22/2016, AND HAVE CALLED REPEATEDLY TO SET UP AN APPOINTMENT. THEY HAVE ME ON A WAITING LIST, AND IT ALREADY HAS BEEN 4 MONTHS. THE DEALER SAYS…
Read full complaint
SAFETY RECALL S03/NHTSA 16V-046. THE DEALER, PARKWAY CHRYSLER DODGE, IN CLINTON TWP., MICHIGAN FAILED TO REMEDY THIS DEFECT WITHIN A REASONABLE TIME. I FIRST NOTIFIED THE DEALER ON 4/22/2016, AND HAVE CALLED REPEATEDLY TO SET UP AN APPOINTMENT. THEY HAVE ME ON A WAITING LIST, AND IT ALREADY HAS BEEN 4 MONTHS. THE DEALER SAYS CHRYSLER WILL ONLY SEND THEM A LIMITED NUMBER OF PARTS, SO I COULD BE WAITING MANY MORE MONTHS FOR THE REPAIR. I FEEL THIS IS UNACCEPTABLE.
NHTSA ODI #10896928
Mileage unknown · Aug 13, 2016
Electrical SystemEngineFire
SONS CAR WAS PARKED IN GARAGE AFTER RETURNING FROM PICKING UP LUNCH IN COLUMBUS OH. MINUTES LATER WHILE IN HOUSE HE NOTICE FIRE, EXPLOSION TYPE SOUND, SAW FLAMES COMING OUT OF GARAGE, CALLED 911 ... BURNED GARAGE- COMPLETELY DESTROYED, CAR TOTALED, FLAMES SPREAD TO SIDE OF HOUSE. FIRE OFFICIALS REPORT SAID CAUSE OF FIRE WAS FROM…
Read full complaint
SONS CAR WAS PARKED IN GARAGE AFTER RETURNING FROM PICKING UP LUNCH IN COLUMBUS OH. MINUTES LATER WHILE IN HOUSE HE NOTICE FIRE, EXPLOSION TYPE SOUND, SAW FLAMES COMING OUT OF GARAGE, CALLED 911 ... BURNED GARAGE- COMPLETELY DESTROYED, CAR TOTALED, FLAMES SPREAD TO SIDE OF HOUSE. FIRE OFFICIALS REPORT SAID CAUSE OF FIRE WAS FROM ENGINE AND AN ELECTRICAL MECHANICAL ISSUE IN ENGINE. HE HAS PHOTOS AND THE OFFICIAL REPORT. HE CONTACTED THE DODGE DEALER THAT VERY AFTERNOON. HIS ADDRESS IS [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR
NHTSA ODI #10895550
Mileage unknown · Aug 10, 2016
Power Train
TL* THE CONTACT OWNS A 2014 DODGE CHARGER. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 16V240000 (POWER TRAIN) AND STATED THAT THE PART NEEDED FOR THE REPAIR WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF T…
Read full complaint
TL* THE CONTACT OWNS A 2014 DODGE CHARGER. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 16V240000 (POWER TRAIN) AND STATED THAT THE PART NEEDED FOR THE REPAIR WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. PARTS DISTRIBUTION DISCONNECT.
NHTSA ODI #10894895
36,000 miles · Jul 28, 2016
Power Train
TL* THE CONTACT OWNS A 2014 DODGE CHARGER. WHILE PARKED WITH THE ENGINE OPERATED, THE GEAR LEVER WAS SHIFTED INTO THE PARK POSITION. THE VEHICLE BEGAN TO ROLL INDEPENDENTLY A FEW SECONDS AFTER THE CONTACT EXITED THE VEHICLE. THE CONTACT RE-ENTERED THE VEHICLE, DEPRESSED THE BRAKE PEDAL, AND THE VEHICLE CAME TO A COMPLETE STOP. T…
Read full complaint
TL* THE CONTACT OWNS A 2014 DODGE CHARGER. WHILE PARKED WITH THE ENGINE OPERATED, THE GEAR LEVER WAS SHIFTED INTO THE PARK POSITION. THE VEHICLE BEGAN TO ROLL INDEPENDENTLY A FEW SECONDS AFTER THE CONTACT EXITED THE VEHICLE. THE CONTACT RE-ENTERED THE VEHICLE, DEPRESSED THE BRAKE PEDAL, AND THE VEHICLE CAME TO A COMPLETE STOP. THE VEHICLE WAS TOWED TO THE DEALER. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 36,000.
NHTSA ODI #10889378
42,000 miles · Jul 27, 2016
Power TrainCrash
TL* THE CONTACT OWNS A 2014 DODGE CHARGER. WHILE THE GEAR SHIFTER WAS IN THE PARK POSITION, THE VEHICLE ROLLED AWAY IN REVERSE AND CRASHED INTO A SIGN AND A TREE. THE AIR BAGS FAILED TO DEPLOY. THERE WERE NO INJURIES AND A POLICE REPORT WAS NOT FILED. THE VEHICLE WAS TAKEN TO A DEALER AND WAS INSPECTED BY A TECHNICIAN FROM THE M…
Read full complaint
TL* THE CONTACT OWNS A 2014 DODGE CHARGER. WHILE THE GEAR SHIFTER WAS IN THE PARK POSITION, THE VEHICLE ROLLED AWAY IN REVERSE AND CRASHED INTO A SIGN AND A TREE. THE AIR BAGS FAILED TO DEPLOY. THERE WERE NO INJURIES AND A POLICE REPORT WAS NOT FILED. THE VEHICLE WAS TAKEN TO A DEALER AND WAS INSPECTED BY A TECHNICIAN FROM THE MANUFACTURER, BUT WAS NOT DIAGNOSED OR REPAIRED. THE VIN WAS INCLUDED IN NHTSA CAMPAIGN NUMBER: 16V240000 (POWER TRAIN); HOWEVER, THE PART NEEDED TO REPAIR THE VEHICLE WAS UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS NOTIFIED OF THE ISSUE. THE FAILURE MILEAGE WAS 42,000. PARTS DISTRIBUTION DISCONNECT.
NHTSA ODI #10888950
55,000 miles · Jul 25, 2016
Electrical System
MY 2014 DODGE CHARGER HAS 55,000 MILES. THE CAR HAS A TOTAL LOSS OF POWER. THE CAR WAS STATIONARY WHEN THIS HAPPENED. THIS IS A SAFETY HAZARD. IF MY CAR WAS TO LOSE ALL POWER WHILE DRIVING I RUN A RISK OF CRASHING INTO SOMEONE OR SOMETHING POSSIBLY KILLING ANOTHER PERSON OR MYSELF. I WAS TOLD BY THE DODGE DEALERSHIP THAT IT IS A…
Read full complaint
MY 2014 DODGE CHARGER HAS 55,000 MILES. THE CAR HAS A TOTAL LOSS OF POWER. THE CAR WAS STATIONARY WHEN THIS HAPPENED. THIS IS A SAFETY HAZARD. IF MY CAR WAS TO LOSE ALL POWER WHILE DRIVING I RUN A RISK OF CRASHING INTO SOMEONE OR SOMETHING POSSIBLY KILLING ANOTHER PERSON OR MYSELF. I WAS TOLD BY THE DODGE DEALERSHIP THAT IT IS A "FAULTY" TOTALLY INTEGRATED POWER SYSTEM ALSO KNOWN AS THE TIPM. AS UPON READING CONSUMER COMPLAINTS ON THIS VEHICLE THERE HAS BEEN RECALLS FOR CHRYSLERS "FAULTY" TIPM. PLEASE HELP ME FIX MY ISSUE AS THIS IS A DANGEROUS VEHICLE TO DRIVE BEING THAT IT COULD LOSE POWER AT ANY GIVEN TIME.
NHTSA ODI #10888088
38,000 miles · Jul 21, 2016
Service BrakesSteering
WHILE DRIVING AND PREPARING TO TURN MY VEHICLE TOOK CONTROL AND I WAS NO LONGER ABLE TO BREAK OR TURN. THANKFULLY THERE WAS NOBODY IN THE NEIGHBOR AT THE TIME AND WITH LESS THAN A FOOT FROM HITTING THE STOP SIGN I WAS ABLE TO STOP. I TOOK IT TO THE DEALER WHERE I PURCHASED (1.5 YEARS PRIOR)AND THEY SAID NOTHING WAS WRONG JUST N…
Read full complaint
WHILE DRIVING AND PREPARING TO TURN MY VEHICLE TOOK CONTROL AND I WAS NO LONGER ABLE TO BREAK OR TURN. THANKFULLY THERE WAS NOBODY IN THE NEIGHBOR AT THE TIME AND WITH LESS THAN A FOOT FROM HITTING THE STOP SIGN I WAS ABLE TO STOP. I TOOK IT TO THE DEALER WHERE I PURCHASED (1.5 YEARS PRIOR)AND THEY SAID NOTHING WAS WRONG JUST NEEDED A NEW BATTERY. I INSISTED THIS WAS NOT THE ISSUE SO THE MANAGER HAD HIS ASSOCIATE TEST DRIVE TO COME TO THE SAME CONCLUSION THE STEERING AND BRAKE SYSTEM IS FINE. NOT HAPPY I LEFT AFTER PURCHASING THE BATTERY AND HERE WE ARE 1.5 WEEKS LATER WITH THE SAME ISSUE. I TRIED TO DRIVE OUT OF WORK YESTERDAY AND I LOST CONTROL TO MY STEERING AND IT LOCKED. I PUT MY CAR IN PARK AND TRIED ONCE MORE THE SAME THING HAPPENED, I THEN TRY TO RESTART BUT IT WOULD NOT ALLOW ME TO DO SO. I HAD TO DISCONNECT THE BATTERY AND IT STARTED. NOT FEELING SAFE FOR MY LIFE I LEFT THE CAR AT WORK AND STILL DO NOT WANT TO DRIVE IT. FROM WHAT I AM READING I AM NOT THE ONLY 2014 DODGE CHARGER HAVING THIS ISSUE. I NEED THIS FIXED IF I WAS ON THE FREEWAY WHO KNOWS WHAT WOULD HAVE HAPPENED.
NHTSA ODI #10887467
23,000 miles · Jul 13, 2016
Electrical SystemElectronic Stability Control (esc)Vehicle Speed Control
MY 2014 DODGE CHARGER IS BRAND NEW OFF THE LOT OF LHM DODGE IN TUCSON, AZ. BY 13,978 MY CAR SMELLED LIKE SULFUR WHILE IN MOTION. DRIVING SLUGGISHLY, AND THE "BATTERY SAVER MODE" LIGHT ON. BROUGHT INTO LARRY H MILLER FOR REPAIR. WAS TOLD THE ALTERNATOR NEEDED REPLACED AFTER 13,975 MILES ON THE VEHICLE. AT 14,100 MILES THE VEHICLE…
Read full complaint
MY 2014 DODGE CHARGER IS BRAND NEW OFF THE LOT OF LHM DODGE IN TUCSON, AZ. BY 13,978 MY CAR SMELLED LIKE SULFUR WHILE IN MOTION. DRIVING SLUGGISHLY, AND THE "BATTERY SAVER MODE" LIGHT ON. BROUGHT INTO LARRY H MILLER FOR REPAIR. WAS TOLD THE ALTERNATOR NEEDED REPLACED AFTER 13,975 MILES ON THE VEHICLE. AT 14,100 MILES THE VEHICLE WAS MAKING THE SAME SMELL, AND THE BATTERY SAFER MODE LIGHT WAS ON AGAIN . RETURNED IT TO LHM WITH COMPLAINTS. THEY SAY "IT'S NORMAL" MANAGER TOLD ME "DODGE JUST DIDN'T MAKE THE ALTERNATOR BIG ENOUGH FOR THAT ENGINE, MANUFACTURER FLAW"AT 14,432 MILES, THE VEHICLE NOT BLOWING COLD AIR. BATTERY SAVER MODE LIGHT WAS STILL ON, SMELLED LIKE SULFUR AND CAR WAS DRIVING SLUGGISH. I OPENED CASE WITH CORPORATE. THEY "FIXED" IT, AND SENT ME ON MY WAY. ON JUNE 17, 2016, MY VEHICLE WAS DRIVING SLUGGISHLY, THE ENGINE LIGHT ON, CALLED DODGE IMMEDIATELY AND WAS ASSIGNED A CASE MANAGER. I CALLED JIM CLICK IMMEDIATELY TO GET MY VEHICLE IN. MY VEHICLE WAS 23,900 MILES. DODGE CLAIMED THEY COULD NOT GET ME IN UNTIL JULY 1ST AND THAT ITS "FINE TO DRIVE MY VEHICLE AS LONG AS THE LIGHT ISN'T FLASHING". BROUGHT IN FOR "REPAIR" ON JUNE 1ST. I DROVE A RENTAL CAR FROM FRIDAY JUNE 1ST-JUNE 8TH, THE "CLUSTER" IN THE DASH WAS NOT READING AND NEEDED TO BE REPLACED. I WAS TOLD IT WAS "ALL FIXED". WHEN THE VEHICLE PULLED UP I GOT IN AND BEGAN TO PULL AWAY AS MY DASHBOARD WENT BLACK. I TURNED AROUND. MY ADVISOR BROUGHT IT BACK AND EXPLAINED THAT IT NEEDED TO BE "RESET" BUT THAT HE'LL ORDER A NEW CLUSTER. I GET INTO MY VEHICLE THERE IS AN "ERROR" SIGN WHERE THE MILAGE IS SUPPOSED TO BE. I THAT I DIDN'T FEEL COMFORTABLE DRIVING THIS VEHICLE. I EXPRESSED HOW UPSET I WAS ABOUT THE SITUATION AND HE SAID TO ME "YOU'LL BE FINE TO DRIVE IT, IT WON'T SHUT OFF". I GET HOME STARTED IT, AND THE ENTIRE DASH SHUTS OFF. MY CAR IS NOW BEING TOWED AGAIN TO JIM CLICK DODGE.
NHTSA ODI #10884695
Official recalls
9Jan 15, 2019
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Consequence & remedy
Consequence: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
May 17, 2018
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence & remedy
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Additional source detail variants (3)
Electrical System:software
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Vehicle Speed Control:cruise Control
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Electrical System:wiring
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Nov 21, 2017
Chrysler (FCA US LLC) is recalling certain 2014 Dodge Challenger, Charger, Durango, Chrysler 300, and Jeep Grand Cherokee vehicles equipped with a 3.6L engine and a 160 amp alternator. In the affected vehicles, the alternator may suddenly fail.
Consequence & remedy
Consequence: If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will replace the alternator, free of charge. The recall began December 15, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T75.
Jul 10, 2017
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Challenger, Dodge Charger, Chrysler 300, Dodge Durango, and 2012-2014 Jeep Grand Cherokee vehicles. The affected vehicles have electro-hydraulic power steering (EHPS) and are equipped with a 5.7L or a 3.6L engine and a 160, 180 or 220 amp alternator. In the affected vehicles, the alternator may suddenly fail.
Consequence & remedy
Consequence: If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash. There is also the possibility that the alternator may short circuit, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will inspect the alternator and depending on the part number, will replace the alternator, if necessary, free of charge. The recall began February 12, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T36.
Feb 14, 2017
Chrysler (FCA US LLC) is recalling certain 2014-2017 Dodge Charger and Chrysler 300 vehicles equipped with all-wheel drive (AWD). The front driveshaft bolts may loosen and allow the front driveshaft to disconnect, potentially causing a loss of motive power.
Consequence & remedy
Consequence: A loss of motive power can increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will replace all eight front driveshaft bolts, free of charge. The recall began April 7, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T03.
Apr 25, 2016
Chrysler (FCA US LLC) is recalling certain model year 2012-2014 Dodge Charger and Chrysler 300 vehicles manufactured February 15, 2011, to November 27, 2014, and 2014-2015 Jeep Grand Cherokee vehicles manufactured July 16, 2012, to December 22, 2015. The affected vehicles, equipped with an eight-speed automatic transmission and a monostable gear selector, may not adequately warn the driver when driver's door is opened and the vehicle is not in PARK, allowing them to exit the vehicle while the vehicle is still in gear.
Consequence & remedy
Consequence: Drivers thinking that their vehicle's transmission is in the PARK position may be struck by the vehicle and injured if they attempt to get out of the vehicle while the engine is running and the parking brake is not engaged.
Remedy: Chrysler will notify owners, and dealers will update the vehicle software to mitigate the risk of vehicle rollaway, free of charge. The recall began on June 24, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S27. Note: On October 19, 2016 Chrysler identified some previously repaired vehicles did not receive the complete software updates. Chrysler will renotify the affected owners, and dealers will update the software again.
Jan 28, 2016
FCA US LLC (Chrysler) is recalling certain model year 2011-2016 Dodge Charger vehicles manufactured August 23, 2010, to January 7, 2016. When an affected vehicle is lifted using the supplied tire jack without chocking the wheels, the vehicle's body-side sill may give causing the tire jack to fail and the car to fall.
Consequence & remedy
Consequence: A car that falls unexpectedly increases the risk of injury.
Remedy: Chrysler will notify owners, and dealers will provide owners with wheel chocks and instructions for their use, free of charge. The recall began on March 21, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S03.
Jul 27, 2015
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger vehicles manufactured May 6, 2010, to June 5, 2014. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt pre-tensioners may activate.
Consequence & remedy
Consequence: Air bags that unexpectedly deploy increase the risk of a crash or injury.
Remedy: Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R35.
Additional source detail variants (2)
Seat Belts
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger vehicles manufactured May 6, 2010, to June 5, 2014. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt pre-tensioners may activate.
Consequence: Air bags that unexpectedly deploy increase the risk of a crash or injury.
Remedy: Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R35.
Air Bags:side/window
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger vehicles manufactured May 6, 2010, to June 5, 2014. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt pre-tensioners may activate.
Consequence: Air bags that unexpectedly deploy increase the risk of a crash or injury.
Remedy: Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R35.
Oct 8, 2014
Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2014 Chrysler 300, Dodge Charger, Challenger, and Durango; and 2012-2014 Jeep Grand Cherokee vehicles manufactured April 22, 2010, to January 2, 2014, and equipped with a 3.6L engine and a 160 amp alternator. In the affected vehicles, the alternator may suddenly fail.
Consequence & remedy
Consequence: If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash.
Remedy: Chrysler has notified owners, and dealers will replace the alternator, free of charge. The recall began on February 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P60.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA16002 · Vehicle Rollaway, Engine On
Opened Feb 3, 2016 · Closed Jun 24, 2016
Status: closed (inferred from source dates) · Power Train:automatic Transmission:gear Position Indication (prndl)
On April 22, 2016, Fiat Chrysler Automotive US LLC, (FCA) submitted a Defect Information Report (DIR) to NHTSA regarding a defect that could result in unattended vehicle rollaway with the engine running in approximately 811,586 model year (MY) 2012 to 2014 Dodge Charger and Chrysler 300 vehicles and MY 2014 to 2015 Jeep Grand Cherokee vehicles equipped with 8-speed transmissions and a monostable gear selector (NHTSA Recall #16V-240, FCA Recall #S27). According to FCA's DIR, The existing strategies built into these vehicles to deter drivers from exiting the vehicle after failing to put the transmission into PARK have not stopped some from doing so. Drivers erroneously concluding that their vehicle's transmission is in the PARK position may be struck by the vehicle and injured if they attempt to get out of the vehicle while the engine is running and the parking brake is not engaged.The vehicles recalled by FCA are equipped with Monostable electronic (shift-by-wire) gearshift assemblies supplied by ZF Group (see Figure 1).The subject Monostable shifter has a single neutral position that it snaps back to when the driver releases the shift knob.Although the Monostable gearshift has the familiar appearance of a conventional console mechanical gearshift assembly, it has an unfamiliar movement that does not provide the tactile or visual feedback that drivers are accustomed to receiving from conventional shifters.Consequently, the driver must take additional time to verify that the desired gear position was achieved by checking the PRNDL display on the shift knob or the Electronic Vehicle Information Center (EVIC) display.
Additional source detail variants (2)
Power Train:automatic Transmission:gear Position Indication (prndl)
On April 22, 2016, Fiat Chrysler Automotive US LLC, (FCA) submitted a Defect Information Report (DIR) to NHTSA regarding a defect that could result in unattended vehicle rollaway with the engine running in approximately 811,586 model year (MY) 2012 to 2014 Dodge Charger and Chrysler 300 vehicles and MY 2014 to 2015 Jeep Grand Cherokee vehicles equipped with 8-speed transmissions and a monostable gear selector (NHTSA Recall #16V-240, FCA Recall #S27). According to FCA's DIR, The existing strategies built into these vehicles to deter drivers from exiting the vehicle after failing to put the transmission into PARK have not stopped some from doing so. Drivers erroneously concluding that their vehicle's transmission is in the PARK position may be struck by the vehicle and injured if they attempt to get out of the vehicle while the engine is running and the parking brake is not engaged.The vehicles recalled by FCA are equipped with Monostable electronic (shift-by-wire) gearshift assemblies supplied by ZF Group (see Figure 1).The subject Monostable shifter has a single neutral position that it snaps back to when the driver releases the shift knob.Although the Monostable gearshift has the familiar appearance of a conventional console mechanical gearshift assembly, it has an unfamiliar movement that does not provide the tactile or visual feedback that drivers are accustomed to receiving from conventional shifters.Consequently, the driver must take additional time to verify that the desired gear position was achieved by checking the PRNDL display on the shift knob or the Electronic Vehicle Information Center (EVIC) display.
Power Train:automatic Transmission:gear Position Indication (prndl)
On April 22, 2016, Fiat Chrysler Automotive US LLC, (FCA) submitted a Defect Information Report (DIR) to NHTSA regarding a defect that could result in unattended vehicle rollaway with the engine running in approximately 811,586 model year (MY) 2012 to 2014 Dodge Charger and Chrysler 300 vehicles and MY 2014 to 2015 Jeep Grand Cherokee vehicles equipped with 8-speed transmissions and a monostable gear selector (NHTSA Recall #16V-240, FCA Recall #S27). According to FCA's DIR, The existing strategies built into these vehicles to deter drivers from exiting the vehicle after failing to put the transmission into PARK have not stopped some from doing so. Drivers erroneously concluding that their vehicle's transmission is in the PARK position may be struck by the vehicle and injured if they attempt to get out of the vehicle while the engine is running and the parking brake is not engaged.The vehicles recalled by FCA are equipped with Monostable electronic (shift-by-wire) gearshift assemblies supplied by ZF Group (see Figure 1).The subject Monostable shifter has a single neutral position that it snaps back to when the driver releases the shift knob.Although the Monostable gearshift has the familiar appearance of a conventional console mechanical gearshift assembly, it has an unfamiliar movement that does not provide the tactile or visual feedback that drivers are accustomed to receiving from conventional shifters.Consequently, the driver must take additional time to verify that the desired gear position was achieved by checking the PRNDL display on the shift knob or the Electronic Vehicle Information Center (EVIC) display.
Illustration