NHTSA owner reports · September 18, 2026 snapshot.
Exterior Lighting complaints
93 reportsClear category filter80,000 miles · Nov 24, 2014
Electrical SystemExterior Lighting
MY PASSENGER SIDE HEAD LIGHT WENT OFF AND ON FOR ABOUT 2 WEEKS BEFORE FAILING TO COME ON AT ALL. BULB WAS CHECKED , THEN REPLACED. THE BATTERY CABLES WERE TAKEN OFF OVER NIGHT TO TRY TO RESET THE COMPUTER BUT NOTHING WORKED. I SHOULD NOT HAVE TO PAY $900 + TO FIX A HEADLIGHT ON A CAR 7 YEARS OLD. WHY ARE THEY NOT ISSUING A RECAL…
Read full complaint
MY PASSENGER SIDE HEAD LIGHT WENT OFF AND ON FOR ABOUT 2 WEEKS BEFORE FAILING TO COME ON AT ALL. BULB WAS CHECKED , THEN REPLACED. THE BATTERY CABLES WERE TAKEN OFF OVER NIGHT TO TRY TO RESET THE COMPUTER BUT NOTHING WORKED. I SHOULD NOT HAVE TO PAY $900 + TO FIX A HEADLIGHT ON A CAR 7 YEARS OLD. WHY ARE THEY NOT ISSUING A RECALL ON A PROBLEM THAT SO MANY PEOPLE ARE HAVING? *TR
NHTSA ODI #10660540
102,000 miles · Nov 3, 2014
Exterior Lighting
DRIVERS SIDE LOW BEAM ONLY WILL NOT WORK. HIGH BEAM WORKS LOW BEAM DOES NOT. *TR
NHTSA ODI #10652228
130,000 miles · Oct 26, 2014
Electrical SystemExterior Lighting
LOW BEAM HEADLIGHT DON'T WORK. DEALER ASK FOR TIPM REPLACEMENT (9FUSE BOX). NOTICED THAT THIS PROBLEM WITH TOO MANY. IT IS A DESIGN FAILURE. SHOULD RECALL AND FIX OR REIMBURSE TO EVERYONE. ADDITIONAL INFORMATION ARE AT HTTP://WWW.CARGURUS.COM/CARS/DISCUSSION-T24900_DS494668. *TR
NHTSA ODI #10650092
124,000 miles · Oct 21, 2014
Electrical SystemExterior Lighting
NOTICED THE DRIVER'S SIDE HEADLIGHT WAS OUT AGAIN WHILE I WAS DRIVING THROUGH A PARKING LOT. I PULLED INTO A PARKING SPOT AND TURNED THE LIGHTS OFF AND BACK ON AGAIN AND THEN BOTH HEADLIGHTS WERE WORKING. TOOK IT TO THE SHOP TODAY SINCE WE'VE HAD THE TIPM AND TIPM CONNECTOR REPLACED WITHIN THE LAST 6 MONTHS. THEY COULD NOT DUPLI…
Read full complaint
NOTICED THE DRIVER'S SIDE HEADLIGHT WAS OUT AGAIN WHILE I WAS DRIVING THROUGH A PARKING LOT. I PULLED INTO A PARKING SPOT AND TURNED THE LIGHTS OFF AND BACK ON AGAIN AND THEN BOTH HEADLIGHTS WERE WORKING. TOOK IT TO THE SHOP TODAY SINCE WE'VE HAD THE TIPM AND TIPM CONNECTOR REPLACED WITHIN THE LAST 6 MONTHS. THEY COULD NOT DUPLICATE THE HEADLIGHT NOT WORKING, BUT SAID THEY'D REPLACE THE TIPM SINCE IT'S STILL UNDER WARRANTY. WE'RE REALLY STARTING TO HATE THIS CAR. *TR
NHTSA ODI #10649189
123,429 miles · Oct 21, 2014
Electrical SystemExterior Lighting
DRIVER'S SIDE HEADLIGHT WENT OUT AGAIN. AND THEN ONE DAY THE CAR WOULDN'T START. JUMPED THE CAR AND IT STARTED. WE JUST HAD THE TIPM REPLACED A FEW MONTHS AGO. THIS TIME THEY FOUND A BURNT TIPM CONNECTOR PIN. THEY REPLACED THE CONNECTOR AND COULD NOT DUPLICATE THE NO-START CONDITION. *TR
NHTSA ODI #10649188
114,000 miles · Oct 21, 2014
Electrical SystemExterior Lighting
DRIVER'S SIDE HEADLIGHT IS OUT. GOT THE TIPM REPLACED FOR $700+. THAT'S WAY TOO EXPENSIVE FOR A HEADLIGHT. *TR
NHTSA ODI #10649187
112,934 miles · Oct 21, 2014
Electrical SystemExterior Lighting
DRIVER'S SIDE HEADLIGHT WENT OUT. TOOK IT TO SHOP TO GET IT REPLACED. IT WAS NOT THE LIGHTBULB. THEY GOT IT FIXED, BUT SAID THE TIPM MAY BE FAULTY AND IT WILL NEED REPLACED IF HEADLIGHT GOES OUT AGAIN. A DAY LATER, THE HEADLIGHT WENT OUT AGAIN. *TR
NHTSA ODI #10649184
102,000 miles · Oct 9, 2014
Electrical SystemExterior Lighting
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT 40 MPH, THE DRIVER'S SIDE HEAD LIGHT FAILED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC. THE TECHNICIAN DIAGNOSED THAT THE TOTAL INTEGRATED POWER MODULE WAS FAULTY AND NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER W…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT 40 MPH, THE DRIVER'S SIDE HEAD LIGHT FAILED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC. THE TECHNICIAN DIAGNOSED THAT THE TOTAL INTEGRATED POWER MODULE WAS FAULTY AND NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 102,000.
NHTSA ODI #10643639
129,000 miles · Oct 4, 2014
Electrical SystemExterior Lighting
DRIVER SIDE HEADLAMP HAS GONE OUT DUE TO A TOTAL INTERGRATED POWER MODULE FAILURE. *TR
NHTSA ODI #10641420
149,000 miles · Sep 7, 2014
Electrical SystemExterior Lighting
HAD TO REPLACE THE ALTERNATOR .THE CHARGING LIGHT WAS COMING ON.NOW THE HEAD LIGHTS ARE NOT WORKING REPLACED BULBS STILL NOT WORKING NOT GETTING POWER TIPM ISSUE. *TR
NHTSA ODI #10631414
Official recalls
4Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Jun 3, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
May 7, 2007
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Dec 29, 2006
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10012 · Sticking Accelerator Pedal
Opened Apr 29, 2010 · Closed Aug 26, 2010
Status: closed (inferred from source dates) · Vehicle Speed Control:accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
Illustration