IllustrationTHE CONSUMER WAS UNABLE TO HAVE THE CAM SHAFT POSITION (CMP) SENSOR RECALL 04V357000 PERFORMED BECAUSE THERE ISN'T ANY DEALERSHIPS STILL IN BUSINESS IN THEIR STATE.
1999 Daewoo Nubira
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 1999 Daewoo Nubira do not stand out strongly from the model-year median of 63.
About this comparison →How this year compares
Owner complaints by model year
Compare all Nubira years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
10–25K
625–50K
750–75K
575–100K
1100–150K
0150K+
20 reports with mileage · 43 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Engine And Engine Cooling. Review the 47 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Suspension. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes, Hydraulic. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports2 fire reports0 injury reports
What owners actually said
63 reportsNHTSA RECALL: 04V357000 SUBJECT: CAMSHAFT POSITION SENSOR. THE CONSUMER WAS UNABLE TO LOCATE A DEALER IN THE AREA TO HONOR THE RECALL. PLEASE PROVIDE FURTHER DETAILS. *JB
THERE WAS NO DEALER OR SERVICE CENTER TO REPAIR THE CAM SHAFT CENSOR. A DEALER WAS FOUND, HOWEVER THEY STATED THEY DO NOT HONOR RECALLS. RECALL #04V357000
CONSUMER RECEIVED A RECALL NOTICED(04V3570000)CAM SHAFT POSITION (CMP) SENSOR DEALER WAS NOT I OPERATION.
CHECK ENGINE LIGHT APPEARED ON THE DASHBOARD AND REMAINED ON. CONSUMER RECEIVED NHTSA RECALL 04V357000 ON THE CAM SHAFT POSITION SENSOR. HOWEVER, CONSUMER WAS UNABLE TO LOCATE A DEALERSHIP IN THE AREA. *AK
WHEN CHANGING LANES STEERING WHEEL VIBRATED. THE TIRES WERE WEARING UNEVENLY. VEHICLE WAS DRIVEN TO A DEALERSHIP, WHO INDICATED THAT THIS OCCURRED BECAUSE THE LOWER CONTROL ARMS WERE DEFECTIVE, AND NEEDED TO BE REPLACED. THE PARTS WERE REPLACED, BUT THE FAILURE RECURRED.*AK
AT A MERE 57,323 MILES ON MY CAR THE TIMING BELT SNAPPED IN THE MIDDLE OF MY DRIVE HOME FROM WWORK, WHICH LEFT ME STRANDED.*AK
THE CONTROL ARM MADE A CRACKING NOISE WHEN DRIVING, THERE WAS A RECALL REGARDING THE ISSUE, HOWEVER THE VEHICLE WAS NOT INCLUDED. *AK *TS *JB
TIMING CHAIN WENT OUT. TOLD WHEN THIS HAPPENS ON A DAEWOO IT USUALLY DAMAGES THE VALVES. TOTAL COST $1400.00 WITH 1 MONTH TO GET PARTS. SEARCH MANY GM/CHEVY PLACES WHICH NOW SERVICE THE DAEWOO. ONLY HAVE 71240 MILES ON CAR. GOT IT AT 51200 AND PUT AROUND 20K ON IT. *TT
CAR QUIT IN MIDST OF DRIVING. I THOUGHT IT STALLED. TOWED TO SHOP TO FIND OUT THE TIMING BELT BROKE. THIS CAR HAD 44813 MILES ON IT WHEN THIS HAPPENED, MECHANIC SAID THIS IS UNHEARD OF AND DUG TO FIND THE REASON. WATER PUMP WAS LEAKING INTERNALLY, CAUSED THE TIMING GEAR TO RUST AND FREEZE WHICH CAUSED THE BELT TO BREAK. THI…
Read full complaint
CAR QUIT IN MIDST OF DRIVING. I THOUGHT IT STALLED. TOWED TO SHOP TO FIND OUT THE TIMING BELT BROKE. THIS CAR HAD 44813 MILES ON IT WHEN THIS HAPPENED, MECHANIC SAID THIS IS UNHEARD OF AND DUG TO FIND THE REASON. WATER PUMP WAS LEAKING INTERNALLY, CAUSED THE TIMING GEAR TO RUST AND FREEZE WHICH CAUSED THE BELT TO BREAK. THIS CAUSED ENGINE PROBLEMS AND HAD TO HAVE THE HEAD RESURFACED. THIS PROBLEM CAUSED MAJOR PROBLEMS AND EXPENSE ($2245.17). OWNER OF THE SHOP SAID THAT A TIMING BELT DOESN'T EVEN HAVE MAINTENANCE (LOOK AT IT) UNTIL A VEHICLE HAS 60,000 MILES ON IT. THERE WAS NO WAY TO KNOW THAT THE WATER PUMP HAD A PROBLEM.
Official recalls
204V394000 · Engine And Engine Cooling
Aug 6, 2004
ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.
Consequence & remedy
Consequence: THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.
Remedy: DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. OWNERS SHOULD CONTACT DAEWOO PUERTO RICO AT 1-877-362-1234 OPTION 6.
04V357000 · Engine And Engine Cooling
Jul 14, 2004
ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.
Consequence & remedy
Consequence: THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.
Remedy: DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. THE RECALL BEGAN ON SEPTEMBER 7, 2004. OWNERS SHOULD CONTACT DAEWOO AT 1-877-362-1234, OPTION 6, OR FIND A LOCAL DEALER THROUGH THEIR WEBSITE AT WWW.DAEWOOUS.COM.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0No exact-year investigations in this snapshot.