RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER KEPT INSISTING NO PARTS WERE AVAILABLE.*AK
1999 Daewoo Nubira
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 1999 Daewoo Nubira do not stand out strongly from the model-year median of 63.
About this comparison →How this year compares
Owner complaints by model year
Compare all Nubira years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
20 reports with mileage · 43 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Engine And Engine Cooling. Review the 47 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Suspension. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes, Hydraulic. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
Engine And Engine Cooling complaints
47 reportsCONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK
RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CHECK ENGINE LIGHT ILLUMINATED AFTER RECALL REPAIRS WERE DONE.*AK
CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK
CONSUMER RECEIVED NHTSA RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. AFTER HAVING THE CAM SHAFT POSITION SENSOR REPLACED THE CHECK ENGINE LIGHT APPEARED ON THE DASHBOARD. VEHICLE WAS TAKEN BACK TO THE DEALER FOR INSPECTION, AND MECHANIC DETERMINED THAT THE CAM SHAFT POSITION SENSOR NEEDED TO BE REPLACED AGAIN. *A…
Read full complaint
CONSUMER RECEIVED NHTSA RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. AFTER HAVING THE CAM SHAFT POSITION SENSOR REPLACED THE CHECK ENGINE LIGHT APPEARED ON THE DASHBOARD. VEHICLE WAS TAKEN BACK TO THE DEALER FOR INSPECTION, AND MECHANIC DETERMINED THAT THE CAM SHAFT POSITION SENSOR NEEDED TO BE REPLACED AGAIN. *AK
THE CHECK ENGINE LIGHT WAS ON. THE DEALER KEPT TELLING THE CONSUMER THEY DID NOT HAVE ANY PARTS. CAM SHAFT SENSOR RECALL 04V357000. *AK THE ENGINE STALLED WHILE SITTING AT A RED LIGHT. *JB
THE CONSUMER RECEIVED A RECALL NOTICE(0V4357000) FOR THE CAMSHAFT POSITION. SENSOR. THERE WAS NO DEALER AVAILABLE IN THE AREA TO PERFORM THE RECALL. *JB
FERRERO DAEWOO OF LOVELAND.CONSUMER RECEIVED RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. DEALERSHIP DIDN'T HAVE THE PARTS AVAILABLE, AND INDICATED TO THE CONSUMER THE MANUFACTURER WENT OUT OF BUSINESS. ADDRESS: 2600 NORTH LINCOLN AVENUE, LOVEVELAND , CO 80538, PHONE: 800-660-3305. *AK CONSUMER WAS TOLD T…
Read full complaint
FERRERO DAEWOO OF LOVELAND.CONSUMER RECEIVED RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. DEALERSHIP DIDN'T HAVE THE PARTS AVAILABLE, AND INDICATED TO THE CONSUMER THE MANUFACTURER WENT OUT OF BUSINESS. ADDRESS: 2600 NORTH LINCOLN AVENUE, LOVEVELAND , CO 80538, PHONE: 800-660-3305. *AK CONSUMER WAS TOLD THAT THE VEHICLE COULD CATCH ON FIRE SO IT IS NOT BEING DRIVEN. *TC
CONSUMER STATES THAT SHE RECEIVED A RECALL NOTICE FROM DAEWOO. BUT WHEN SHE TOOK HER VEHICLE TO THE DEALER THEY REFUSED TO DO THE RECALL BECAUSE THEY SAID THAT HER CAMSHAFT SENSOR NUMBER DID NOT MATCH ON THEIR LIST. SHE STATES SHE EVEN OFFERED TO PAY FOR THE SERVICE, BUT THEY FLAT OUT REFUSED. SHE STATES THAT THE DEALER'S NAM…
Read full complaint
CONSUMER STATES THAT SHE RECEIVED A RECALL NOTICE FROM DAEWOO. BUT WHEN SHE TOOK HER VEHICLE TO THE DEALER THEY REFUSED TO DO THE RECALL BECAUSE THEY SAID THAT HER CAMSHAFT SENSOR NUMBER DID NOT MATCH ON THEIR LIST. SHE STATES SHE EVEN OFFERED TO PAY FOR THE SERVICE, BUT THEY FLAT OUT REFUSED. SHE STATES THAT THE DEALER'S NAME IS BOB BROCKLAND, PONTIAC, GMC INC. 1699 PONTIAC DRIVE, CAHOKIA, ILL 62202 618 332 2277. SHE STATES THEY TOLD HER THAT THEY WOULD ONLY INSPECT HER VEHICLE. *JB CONSUMER WENT TO ANOTHER REPAIR FACILITY WHRE THEY REMOVED AND REPLACED THE CAMSHAFT POSITION SENSOR, TIMING BELT, AND SPARK PLUG WIRES. *TT
THE CONSUMER RECEIVED A RECALL CALL NOTICE(0V4357000) FOR THE CAMSHAFT POSITION SENSOR. THE DEALER WAS NOT IN OPERATION. *JB
Official recalls
204V394000 · Engine And Engine Cooling
Aug 6, 2004
ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.
Consequence & remedy
Consequence: THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.
Remedy: DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. OWNERS SHOULD CONTACT DAEWOO PUERTO RICO AT 1-877-362-1234 OPTION 6.
04V357000 · Engine And Engine Cooling
Jul 14, 2004
ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.
Consequence & remedy
Consequence: THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.
Remedy: DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. THE RECALL BEGAN ON SEPTEMBER 7, 2004. OWNERS SHOULD CONTACT DAEWOO AT 1-877-362-1234, OPTION 6, OR FIND A LOCAL DEALER THROUGH THEIR WEBSITE AT WWW.DAEWOOUS.COM.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0No exact-year investigations in this snapshot.
Illustration