NHTSA owner reports · September 18, 2026 snapshot.
Power Train complaints
154 reportsClear category filter34,000 miles · Apr 17, 2015
Power Train
TL* THE CONTACT OWNS A 2012 CHEVROLET SONIC. WHILE DRIVING 25 MPH, THE CHECK ENGINE WARNING LIGHT ILLUMINATED ON THE INSTRUMENT PANEL AND THE VEHICLE STARTED TO SLOW DOWN. THE VEHICLE WAS TOWED TO A DEALER AND IT WAS DETERMINED THAT THE TRANSMISSION TURBINE SHAFT NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTU…
Read full complaint
TL* THE CONTACT OWNS A 2012 CHEVROLET SONIC. WHILE DRIVING 25 MPH, THE CHECK ENGINE WARNING LIGHT ILLUMINATED ON THE INSTRUMENT PANEL AND THE VEHICLE STARTED TO SLOW DOWN. THE VEHICLE WAS TOWED TO A DEALER AND IT WAS DETERMINED THAT THE TRANSMISSION TURBINE SHAFT NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE AND INFORMED THAT THE VEHICLE WAS NOT INCLUDED IN NHTSA CAMPAIGN NUMBER: 14V375000 (POWER TRAIN). THE FAILURE MILEAGE WAS 34,000.
NHTSA ODI #10706257
110,000 miles · Apr 8, 2015
Power Train
THE SHIFTER BUTTON STICKS WHEN PRESSED. THIS DOES NOT ALLOW THE KEY TO BE RELEASED. IT ALSO DOESN'T LOCK THE GEAR SHIFT INTO PLACE ALLOWING THE SHIFTER TO MOVE FROM PARK TO 1 GEAR WITH NO INTERVENTION. *TR
NHTSA ODI #10704580
Mileage unknown · Mar 17, 2015
Power Train
2012 CHEVROLET SONIC. ATTORNEY REPRESENTING CONSUMER WRITES IN REGARDS TO PARTS NOT AVAILABLE TO COMPLETE RECALL. *SMD THE DEALER KEPT THE VEHICLE FOR 18 DAYS WITHOUT PERFORMING ANY WORK. RECALL # 14V315000. *JB
NHTSA ODI #10691439
32,000 miles · Mar 16, 2015
Power Train
THE GEAR SHIFT BUTTON WAS LOCKED IN PARK AND I COULD NOT RELEASE THE KEY FROM THE STEERING COLUMN. AFTER RESEARCHING ON THE INTERNET, ADVICE SAID TO PUSH HARD TO THE LEFT ON THE GEAR SHIFT TO POP THE BUTTON BACK OUT. I DID THAT WHILE JOSTLING THE BUTTON AND IT DID POP OUT. WHEN I PRESSED THE BUTTON AGAIN, THIS TIME IN NEUTRAL, T…
Read full complaint
THE GEAR SHIFT BUTTON WAS LOCKED IN PARK AND I COULD NOT RELEASE THE KEY FROM THE STEERING COLUMN. AFTER RESEARCHING ON THE INTERNET, ADVICE SAID TO PUSH HARD TO THE LEFT ON THE GEAR SHIFT TO POP THE BUTTON BACK OUT. I DID THAT WHILE JOSTLING THE BUTTON AND IT DID POP OUT. WHEN I PRESSED THE BUTTON AGAIN, THIS TIME IN NEUTRAL, THE BUTTON GOT STUCK WITHIN THE GEAR SHIFT COLUMN AGAIN, BUT I FOUND THAT I COULD THEN JUST PUSH THE GEAR SHIFT FORWARD AND BACK BETWEEN GEARS WITHOUT THE BUTTON LOCKING ON THE DESIRED GEAR. THIS IS A MAJOR SAFETY ISSUE BECAUSE IT APPEARED TO ME THAT IF I WERE DRIVING, THE GEAR SHIFT COLUMN COULD MOVE TO ANOTHER GEAR IF I HIT A POT HOLE OR BUMP, WITHOUT ME CONTROLLING IT. IN OTHER WORDS, IT MIGHT HAVE SLIPPED INTO NEUTRAL OR REVERSE. SHOULDN'T THERE BE A RECALL ON THIS? I HAVE TO TAKE IT TO THE DEALER WEDNESDAY, AND IF THIS HAPPENS AGAIN, I WILL HAVE TO DRIVE THE TRIP WITH MY HAND ON THE GEAR SHIFT KNOB TO INSURE IT WILL NOT SLIP OUT OF GEAR. *TR
NHTSA ODI #10694475
30,000 miles · Feb 28, 2015
Power Train
WHEN PLACING THE CAR IN PARK THE GEAR SHIFTER BUTTON GETS STUCK AND DOESN'T DISENGAGE. SINCE IT DOESN'T DISENGAGE THE KEYS CAN'T BE REMOVED FROM THE CAR. IF THE CAR IS PLACED IN REVERSE OR DRIVE THE BUTTON STAYS STUCK CAUSING THE SHIFTER TO BE ENGAGED AND ABLE TO FREELY SHIFT INTO REVERSE OR PARK WHILE DRIVING. THIS HAS HAPPENED…
Read full complaint
WHEN PLACING THE CAR IN PARK THE GEAR SHIFTER BUTTON GETS STUCK AND DOESN'T DISENGAGE. SINCE IT DOESN'T DISENGAGE THE KEYS CAN'T BE REMOVED FROM THE CAR. IF THE CAR IS PLACED IN REVERSE OR DRIVE THE BUTTON STAYS STUCK CAUSING THE SHIFTER TO BE ENGAGED AND ABLE TO FREELY SHIFT INTO REVERSE OR PARK WHILE DRIVING. THIS HAS HAPPENED ON SEVERAL OCCASION AND MOST OFTEN IN COLDER TEMPERATURES. *TR
NHTSA ODI #10691231
41,000 miles · Feb 23, 2015
Power Train
(AUTOMATIC TRANSMISSION) BUTTON ON GEAR SHIFT GETS STUCK IN ENGAGE. ALLOWS FREE SHIFTING FROM PARK TO ANY GEAR WITHOUT THE BRAKE PEDAL BEING PRESSED. MAY EASILY BE BUMPED INTO NEUTRAL, DRIVE, REVERSE, OR MANUAL WITH JUST A TOUCH. ALSO APPLIES IF IN DRIVE OR ANY OTHER GEAR WHICH MAY RESULT IN LOSS OF CONTROL IF IT SHOULD ACCIDENT…
Read full complaint
(AUTOMATIC TRANSMISSION) BUTTON ON GEAR SHIFT GETS STUCK IN ENGAGE. ALLOWS FREE SHIFTING FROM PARK TO ANY GEAR WITHOUT THE BRAKE PEDAL BEING PRESSED. MAY EASILY BE BUMPED INTO NEUTRAL, DRIVE, REVERSE, OR MANUAL WITH JUST A TOUCH. ALSO APPLIES IF IN DRIVE OR ANY OTHER GEAR WHICH MAY RESULT IN LOSS OF CONTROL IF IT SHOULD ACCIDENTALLY BE BUMPED. WHEN THIS OCCURS, IT IS NOT POSSIBLE TO REMOVE THE KEY FROM THE IGNITION. THIS EXPOSES THE VEHICLE TO THE POTENTIAL OF THEFT OR OTHER UNAUTHORIZED USE. THIS VIDEO ILLUSTRATES THE SAME ISSUE WITH A 2013 SONIC: HTTPS://WWW.YOUTUBE.COM/WATCH?V=TMUXP0BXTVI. *TR
NHTSA ODI #10690171
46,000 miles · Feb 15, 2015
Power Train
I HAVE A 2012 CHEVY SONIC AND THE GEARSHIFT WILL NOT LOCK INTO PLACE AND AN ACCIDENTAL BUMP WILL KNOCK THE CAR INTO ANOTHER GEAR WHICH COULD BE DANGEROUS TO ME AND OTHERS. READING ONLINE THREADS, I HAVE NOTICED THAT THIS AFFECTING MANY OTHER CARS OF THIS MAKE AND MODEL. I NOTICE THAT GM WAIT UNTIL THE LAST MINUTE TO ISSUE RECALL…
Read full complaint
I HAVE A 2012 CHEVY SONIC AND THE GEARSHIFT WILL NOT LOCK INTO PLACE AND AN ACCIDENTAL BUMP WILL KNOCK THE CAR INTO ANOTHER GEAR WHICH COULD BE DANGEROUS TO ME AND OTHERS. READING ONLINE THREADS, I HAVE NOTICED THAT THIS AFFECTING MANY OTHER CARS OF THIS MAKE AND MODEL. I NOTICE THAT GM WAIT UNTIL THE LAST MINUTE TO ISSUE RECALLS. I JUST HOPE THAT IT IS NOT TO LATE FOR ME AND MY FAMILY. *TR
NHTSA ODI #10683524
25,000 miles · Feb 10, 2015
EnginePower TrainVehicle Speed Control
A FEW MONTHS AFTER PURCHASING MY 2012 CHEVY SONIC, I'VE NOTICED A DECEASE IN POWER AND HESITATION IN ITS AUTOMATIC SHIFTING BETWEEN GEARS. I'VE TAKEN IT IN SEVERAL TIMES WITH THE SAME ISSUE, AND EACH TIME THE SERVICE TECHS (EVEN THE SERVICE MANAGER) HAS TOLD ME AND EXPLAINED THAT IT IS BEHAVING "NORMAL" AND "TO DESIGN". IF IT WE…
Read full complaint
A FEW MONTHS AFTER PURCHASING MY 2012 CHEVY SONIC, I'VE NOTICED A DECEASE IN POWER AND HESITATION IN ITS AUTOMATIC SHIFTING BETWEEN GEARS. I'VE TAKEN IT IN SEVERAL TIMES WITH THE SAME ISSUE, AND EACH TIME THE SERVICE TECHS (EVEN THE SERVICE MANAGER) HAS TOLD ME AND EXPLAINED THAT IT IS BEHAVING "NORMAL" AND "TO DESIGN". IF IT WERE "NORMAL" WHY HADN'T IT DONE THAT DRIVING RIGHT OFF THE LOT??? AND WHY IS IT, YEARS LATER, ITS SHIFTING HESITATION HAS GOTTEN WORSE TO THE POINT OF SEVERE JERKING AS IT SHIFTS FROM ONE GEAR TO ANOTHER, AS IF SOMEONE WERE LEARNING HOW TO DRIVE STICK FOR THE FIRST TIME?????? THERE IS NOTHING "NORMAL" ABOUT HOW MY VEHICLE IS PERFORMING. IT IS COMPLETE[XXX] THAT I'VE BEEN GETTING THE RUN AROUND ABOUT THIS ISSUE FOR YEARS. AND THEY REFUSE TO ADMIT THERE'S A PROBLEM, NOR WILL THEY SERVICE IT, WHICH MAKES MY VEHICLE INELIGIBLE TO BE CLAIMED AS A LEMON, WHICH IT OBVIOUSLY IS!!! INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR
NHTSA ODI #10682404
48,419 miles · Jan 22, 2015
Electrical SystemEquipment Adaptive/mobilityPower TrainInjury
THE BUTTON TO RELEASE THE CAR OUT OF GEAR, AND ONCE IN PARK THAT RELEASES THE KEY CAME APART. IT HAS BEEN STICKING FOR AWHILE THEN ALL OF A SUDDEN, SOMETHING SHARP STARTED POKING OUT OF THE BOTTOM OF THE BUTTON, AND IT HAS CUT MY HUSBAND'S HAND. NOW THE BUTTON BARELY PUSHES IN AND THE CAR IS VERY HARD TO GET OUT OF PARK. *TR
NHTSA ODI #10678360
39,000 miles · Jan 19, 2015
Power Train
WHEN I PLACE THE CAR IN PARK THE GEAR SHIFT WILL NOT COMPLETELY RELEASE OR REGISTER THE CAR IS IN PARK. MY KEY WILL NOT RELEASE, AND I HAVE TO PLACE THE CAR IN DRIVE THEN PARK SEVERAL TIMES BEFORE THE KEY WILL RELEASE. *TR
NHTSA ODI #10676379
Official recalls
7Jul 2, 2014
General Motors LLC (GM) is recalling certain model year 2013-2014 Buick Encore all-wheel-drive vehicles manufactured August 23, 2012, to September 9, 2013; Verano vehicles manufactured August 8, 2012, to June 20, 2013; Chevrolet Cruze vehicles manufactured August 7, 2012, to August 16, 2013, and 2012-2014 Chevrolet Sonic vehicles manufactured May 10, 2011, to August 16, 2012 equipped with a Calix oil pan/block heater. In cold temperatures, the insulation on the engine block heater cord can become damaged, allowing the wires to be exposed.
Consequence & remedy
Consequence: Exposed wires increase the risk of electrical shock and personal injury if the cord is handled while it is plugged in.
Remedy: GM will notify owners, and dealers will replace the engine oil pan/block heater cord with a new cord that is rated for temperatures of minus 40 degree Celsius. The recall began in August 2014. Owners may contact Buick customer service at 1-800-521-7300 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 14257.
Jun 12, 2014
General Motors LLC (GM) is recalling certain model year 2012 Chevrolet Sonic vehicles manufactured March 1, 2012, to June 29, 2012, and equipped with a 6 speed automatic transmission and 1.8L four cylinder engine. In the affected vehicles, the transmission turbine shaft may fracture.
Consequence & remedy
Consequence: If the transmission turbine shaft fracture occurs during vehicle operation in first or second gear, the vehicle will not upshift to the third through sixth gears, limiting the vehicle's speed. If the fracture occurs during operation in third through sixth gear, the vehicle will coast until it slows enough to downshift to first or second gear, increasing the risk of a crash.
Remedy: GM will notify owners, and dealers will replace the transmission turbine shaft, free of charge. The recall began on August 8, 2014. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 14234.
Jun 6, 2014
General Motors LLC (GM) is recalling certain model year 2012 Buick Verano vehicles manufactured December 2, 2011 to July, 16, 2012, Chevrolet Cruze vehicles manufactured December 7, 2011 to July 25, 2012, Chevrolet Sonic vehicles manufactured December 5, 2011 to August 2, 2012, and Chevrolet Camaro vehicles manufactured December 1, 2011 to June 11, 2012. The driver side frontal air bag has a shorting bar which may intermittently contact the air bag terminals.
Consequence & remedy
Consequence: If the bar and terminals are contacting each other at the time of a crash necessitating deployment of the driver's frontal air bag, that air bag will not deploy, increasing the driver's risk of injury.
Remedy: GM will notify owners, and dealers will replace the steering wheel air bag coil, free of charge. The recall began on July 25, 2014. Chevrolet owners may contact GM at 1-800-222-1020. Buick owners may contact GM at 1-800-521-7300. Note: This is an expansion of recalls 12V-522 and 13V-023.
Jan 24, 2013
General Motors LLC (GM) is recalling certain model year 2012 Chevrolet Camaro, Cruze and Sonic, and model year 2012 Buick Verano vehicles. The driver side frontal air bag has a shorting bar which may intermittently contact the air bag terminals.
Consequence & remedy
Consequence: If the bar and terminals are contacting each other at the time of a crash necessitating deployment of the driver's frontal air bag, that air bag will not deploy, increasing the driver's risk of injury.
Remedy: GM will notify owners, and dealers will replace the steering wheel air bag coil, free of charge. The safety recall began on February 13, 2013. Owners may contact General Motors at 1-800-521-7300.
Oct 31, 2012
General Motors is recalling certain model year 2012 Buick Verano, Chevrolet Cruze, and Chevrolet Sonic vehicles. The driver side frontal air bag has a shorting bar which may intermittently contact the air bag terminals.
Consequence & remedy
Consequence: If the bar and terminals are contacting each other at the time of a crash necessitating deployment of the driver's frontal airbag, that airbag will not deploy, increasing the driver's risk of injury.
Remedy: General Motors will notify owners, and dealers will replace the steering wheel airbag coil, free of charge. The safety recall began on January 11, 2013. Owners may contact General Motors at 1-800-521-7300.
Aug 20, 2012
General Motors LLC (GM) is recalling certain model year 2012 Chevrolet Sonic vehicles manufactured from May 5, 2011, through February 24, 2012. These vehicles fail to conform to Federal Motor Vehicle Safety Standard No. 104, "Windshield Wiping and Washing Systems." The windshield wiper washer hose on these vehicles may separate from the washer fluid reservoir. If this occurs, washer fluid will not be available to the windshield.
Consequence & remedy
Consequence: A lack of washer fluid could impede the driver's view, increasing the risk of a crash.
Remedy: GM will notify owners, and dealers will secure the windshield washer hose to prevent separation, free of charge. The safety recall began on September 7, 2012. Owners may contact the Chevrolet owner center at 1-866-694-6546.
Dec 28, 2011
GENERAL MOTORS (GM) IS RECALLING CERTAIN MODEL YEAR 2012 CHEVROLET SONIC VEHICLES MANUFACTURED FROM JUNE 2, 2011, THROUGH NOVEMBER 21, 2011. ON SOME OF THESE VEHICLES, THE FRONT BRAKE INNER OR OUTER PAD MAY BE MISSING.
Consequence & remedy
Consequence: A MISSING PAD COULD RESULT IN REDUCED BRAKE SYSTEM PERFORMANCE, INCREASING THE RISK OF A CRASH.
Remedy: GM WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE FRONT BRAKES FOR A MISSING INNER OR OUTER PAD. IF A BRAKE PAD IS MISSING, DEALERS WILL INSTALL NEW INNER AND OUTER PADS, A NEW BRAKE CALIPER, AND A NEW ROTOR. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JANUARY 14, 2012
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
RQ13002 · Air Bag Non-deployment
Opened May 31, 2013 · Closed Jul 9, 2014
Status: closed (inferred from source dates) · Air Bags; Air Bags:frontal; Air Bags:frontal:driver Side:inflator Module
General Motors (GM) has initiated a safety recall of 31,520 model year (MY) 2012 Buick Verano and Chevrolet Camaro, Cruze and Sonic vehicles to address a defect condition that could result in the primary or secondary stage air bag not deploying.These vehicles are a small percentage of all MY 2012 vehicles and were built on several specific production dates broadly ranging from December 1, 2011 to August 2, 2012 (see NHTSA recall 14V-300 for more information).Also, see attached additional report for more information.This investigation was opened to evaluate the scope of two uninfluenced safety recalls (NHTSA recalls 12V-522 and 13V-023) of certain MY 2012 Verano, Camaro, Cruze and Sonic vehicles.These recalls involved the same defect issue as the new recall mentioned above.Accordingly, this investigation is closed based on the recall actions GM is undertaking.
Additional source detail variants (6)
Air Bags:frontal:driver Side:inflator Module
General Motors (GM) has initiated a safety recall of 31,520 model year (MY) 2012 Buick Verano and Chevrolet Camaro, Cruze and Sonic vehicles to address a defect condition that could result in the primary or secondary stage air bag not deploying.These vehicles are a small percentage of all MY 2012 vehicles and were built on several specific production dates broadly ranging from December 1, 2011 to August 2, 2012 (see NHTSA recall 14V-300 for more information).Also, see attached additional report for more information.This investigation was opened to evaluate the scope of two uninfluenced safety recalls (NHTSA recalls 12V-522 and 13V-023) of certain MY 2012 Verano, Camaro, Cruze and Sonic vehicles.These recalls involved the same defect issue as the new recall mentioned above.Accordingly, this investigation is closed based on the recall actions GM is undertaking.
Air Bags:frontal:driver Side:inflator Module
General Motors (GM) has initiated a safety recall of 31,520 model year (MY) 2012 Buick Verano and Chevrolet Camaro, Cruze and Sonic vehicles to address a defect condition that could result in the primary or secondary stage air bag not deploying.These vehicles are a small percentage of all MY 2012 vehicles and were built on several specific production dates broadly ranging from December 1, 2011 to August 2, 2012 (see NHTSA recall 14V-300 for more information).Also, see attached additional report for more information.This investigation was opened to evaluate the scope of two uninfluenced safety recalls (NHTSA recalls 12V-522 and 13V-023) of certain MY 2012 Verano, Camaro, Cruze and Sonic vehicles.These recalls involved the same defect issue as the new recall mentioned above.Accordingly, this investigation is closed based on the recall actions GM is undertaking.
Air Bags:frontal
General Motors (GM) has initiated a safety recall of 31,520 model year (MY) 2012 Buick Verano and Chevrolet Camaro, Cruze and Sonic vehicles to address a defect condition that could result in the primary or secondary stage air bag not deploying.These vehicles are a small percentage of all MY 2012 vehicles and were built on several specific production dates broadly ranging from December 1, 2011 to August 2, 2012 (see NHTSA recall 14V-300 for more information).Also, see attached additional report for more information.This investigation was opened to evaluate the scope of two uninfluenced safety recalls (NHTSA recalls 12V-522 and 13V-023) of certain MY 2012 Verano, Camaro, Cruze and Sonic vehicles.These recalls involved the same defect issue as the new recall mentioned above.Accordingly, this investigation is closed based on the recall actions GM is undertaking.
Air Bags:frontal
General Motors (GM) has initiated a safety recall of 31,520 model year (MY) 2012 Buick Verano and Chevrolet Camaro, Cruze and Sonic vehicles to address a defect condition that could result in the primary or secondary stage air bag not deploying.These vehicles are a small percentage of all MY 2012 vehicles and were built on several specific production dates broadly ranging from December 1, 2011 to August 2, 2012 (see NHTSA recall 14V-300 for more information).Also, see attached additional report for more information.This investigation was opened to evaluate the scope of two uninfluenced safety recalls (NHTSA recalls 12V-522 and 13V-023) of certain MY 2012 Verano, Camaro, Cruze and Sonic vehicles.These recalls involved the same defect issue as the new recall mentioned above.Accordingly, this investigation is closed based on the recall actions GM is undertaking.
Air Bags
General Motors (GM) has initiated a safety recall of 31,520 model year (MY) 2012 Buick Verano and Chevrolet Camaro, Cruze and Sonic vehicles to address a defect condition that could result in the primary or secondary stage air bag not deploying.These vehicles are a small percentage of all MY 2012 vehicles and were built on several specific production dates broadly ranging from December 1, 2011 to August 2, 2012 (see NHTSA recall 14V-300 for more information).Also, see attached additional report for more information.This investigation was opened to evaluate the scope of two uninfluenced safety recalls (NHTSA recalls 12V-522 and 13V-023) of certain MY 2012 Verano, Camaro, Cruze and Sonic vehicles.These recalls involved the same defect issue as the new recall mentioned above.Accordingly, this investigation is closed based on the recall actions GM is undertaking.
Air Bags
General Motors (GM) has initiated a safety recall of 31,520 model year (MY) 2012 Buick Verano and Chevrolet Camaro, Cruze and Sonic vehicles to address a defect condition that could result in the primary or secondary stage air bag not deploying.These vehicles are a small percentage of all MY 2012 vehicles and were built on several specific production dates broadly ranging from December 1, 2011 to August 2, 2012 (see NHTSA recall 14V-300 for more information).Also, see attached additional report for more information.This investigation was opened to evaluate the scope of two uninfluenced safety recalls (NHTSA recalls 12V-522 and 13V-023) of certain MY 2012 Verano, Camaro, Cruze and Sonic vehicles.These recalls involved the same defect issue as the new recall mentioned above.Accordingly, this investigation is closed based on the recall actions GM is undertaking.