2024 Chevrolet Silverado 1500

The contact owns a 2024 Chevrolet Silverado 1500. The contact stated while driving 43-50 MPH, the vehicle hesitated, and the transmission shifted hard. There was an abnormal clunking sound coming from the vehicle. The engine warning light was periodically illuminated. The contact received notification of NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The local dealer was contacted. The dealer was unable to duplicate the failure. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 200. VIN tool confirms parts not available.

The contact owns a 2024 Chevrolet Silverado 1500. The contact received notification of NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

6.2 L engine around 7500 miles engine light came on, it was slow to startup, would shutter during idel. Driving home on the highway the truck turned off cruise control and front impact warning then it came back on about 5 miles down the road. At the same time the truck was shaking and shuttering. Took it into the shop the next day and so far is having at least one maybe 2 cylinders misfiring. Also, since I bought it the axle locks keep saying to service them, take the truck to the dealership and they can't find anything wrong with them. The only way to get the indicator to stop dinging incessantly is to active the axle locks and deactivate them and that will make it stop dinging for about a week.

Valve body needs to be replaced. The truck is still under warranty. I have taken it to the dealership, they ordered the part and told me it was safe to drive in limp mode. I've since been waiting a month for the part to come in without a replacement vehicle. I can't drive to work and am losing quite a bit of business. There is a valve body in stock 97 miles away and GM will not ship it to my local dealer or help me in any way. The truck will not make it 97 miles for the repair. The check engine light stays on for a few days and goes off. I can only drive about 10 miles before it goes into limp mode and the dash will tell me I have reduced acceleration and to drive safely. As far as the safety of me and others UNKNOWN. The dealer has confirmed there is an issue but insists I continue to drive it even though I'm damaging the transmission.

I purchased the Curt Triflex Next Trailer Brake Controller GM Part # 19435732 ( Although may be sold through several part #s) from Jim Norton Chevrolet as this is a GM recommended part through the GM parts catalog and is plug and play with included wiring harness making simple no wire splicing connection. The brake controller we need to tow or travel trailer it worked great for about a month maybe two , then I went to hook up our trailer and the brake controller would not function. So I had a electrician trouble shoot the power and all that checked out good. I contacted CURT for a warranty claim and they stated this is a known issue and they are sending me a new one and I did respond that's spooky what if I was towing and it stops controlling. this could lead to a serious safety issue. I unplugged and it and plugged back in and it started working then stopped again before the next weekend to pull my trailer. again Curt stated via email this is a known issue and sending me a new one when they are in stock , but I had not heard this until I contacted them for warranty claim and still have not received a replacement.

On 7 or 8 occasions while navigating parking lots/driveway turnaround, i bumped the resume switch on the steering wheel and the truck took off accelerating rapidly from 2-4 mph speed until I disengaged with the brake. Someone with slower reactions or unaware of what is going on is going to get hurt by this. I believe it's tied to collision avoidance system and the adaptive cruise control mode. This system will allow cruise to stay engaged even as it slows you to a halt in, e.g. a rush hour slowdown, but if it slows you to some speed just greater than zero, and the traffic ahead speeds up, it will speed back up to the cruise setting. Similarly, when cruise is disengaged by brake action, but there is still a stored value in cruise control, if you accidentally hit resume at slow speeds the logic is treating it like a traffic situation. So the old 20 or 25mph minimum engagement speed no longer applies. As for why I inadvertently hit resume, it has to do with the raised momentary rocker switch at the 9 oclock position on the steering wheel. If you make a turn with your palm against steering wheel. For example, on a left turn, if the wheel is turning counterclockwise and your left palm is in the 9 o'clock position, it can rub against the raised cruise control rocker triggering the resume function, and off she will go! A flush or recessed button/switch would have been a better choice here. At this point, a software change would be the best solution to ignore the resume function below a certain speed.

The contact owns a 2024 Chevrolet Silverado 1500. The contact was notified of NHTSA Campaign Number: 25V274000 (ENGINE AND ENGINE COOLING); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

My Silverado has what seems to be a known issue with recent model Silverados which is a broken/blown valve body at the transmission. The week of the failure, my truck began having rough shifting from first to second gear first thing in the morning, but would be fine after that. Two days later this progressed to all of the gears and nearly stranded me and my kids on the interstate due to not being able to maintain speed. I got the truck to the dealership where they looked up diagnosis code and told me it was the valve body and it would require replacing. Unfortunately, the part is on national backorder with unknown delivery time. Looking online, it seems this is a known issue and parts seems to be months (6+) behind. I am stuck paying for a rental car that GM says I will get reimbursed for, but we will see. To complete the questions above, I did not notice any warning lights or notices until it failed.

The contact owns a 2024 Chevrolet Silverado 1500. The contact stated while driving at various speeds, the vehicle started making abnormal sounds under the floorboard. The contact stated while depressing the accelerator pedal, the vehicle failed to respond as needed. The contact stated the check engine warning light was illuminated. The contact had taken the vehicle to a local dealer and was informed that the vehicle was operating normally. The vehicle was not diagnosed or repaired. The contact stated that vehicle experienced loss of acceleration with abnormal sounds coming from the vehicle and the vehicle was taken back to the same dealer to be diagnosed. The contact was informed that the engine needed to be replaced. The contact was aware of NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling); for which the VIN was included; however, the part to do the recall repair was not yet available. The manufacturer was informed of the failure. The failure mileage was approximately 13,500.