2018 Chevrolet Silverado 1500

10 miles from home on [XXX] after Thanksgiving with my children sleeping at [XXX] in snowy cold weather, my engine began to fail. Power was limited on hills and the check engine light would come on and go back off when on flat or downhill. The next morning I took my truck to the dealer that I purchased it from where I was told the lifters had failed and I need a new engine. 1000 miles after I replaced my engine my transmission failed completely requiring a transmission replacement. Immediately upon picking up the vehicle and going down a long hill in the area, engine breaking turned on as expected but as the truck tried to slow itself, after 2 or 3 downshifts, the transmission began making a loud grinding sound and while still going close to 50 MPH, the speedometer showed 10-15 MPH and the tach dropped to idle. The transmission was decoupled from the motor. When gas was reapplied it seemed to make the connection again and resume normal driving. I called the dealership whose techs did not believe me and told me that I could 'turn off' the engine breaking feature. The situation continued to worsen each drive and it would do it more often. This was unacceptable and they finally had a tech ride with me to experience it and immediately agreed there was an issue and reordered another transmission. The third transmission did not fix the issue and was experienced immediately. They are now guessing how to fix the issue telling me I have to replace the transfer case out of my pocket with no diagnosis, not sure what is causing it and have not fixed the problem. Videos would not fit in upload due to size. Videos show speedometer failure. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact's husband owns a 2018 Chevrolet Silverado 1500. The contact stated that while driving at various speeds, the vehicle hesitated while depressing the accelerator pedal. The vehicle was taken to an independent mechanic where the contact was informed that metal shaving were discovered in the radiator due to a defective torque converter. The manufacturer was then notified of the failure and the contact was informed that there were no recalls on the VIN. The contact was referred to the NHTSA Hotline to report the failure. The vehicle was not repaired. The failure mileage was 143,057.

The contact owns a 2018 Chevrolet Silverado 1500. The contact stated that while driving approximately 70 MPH, the “Service Stabili-trak” message was displayed on the instrument panel. The contact stated that the instrument panel went black, the vehicle lost motive power and decelerated unintendedly. The contact was able to coast to the side of the road. The contact waited approximately 10 minutes before restarting the vehicle and continued driving. The warning light was no longer illuminated. The failure occurred two more times while driving to the residence. The vehicle was taken to several certified mechanics who were unable to determine the cause of the failure. The manufacturer was informed of the failure and opened a case. The manufacturer assisted the contact in scheduling an appointment with the dealer. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 123,000.

The contact owns a 2018 Chevrolet Silverado 1500. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the engine. In addition, the vehicle failed to accelerate as intended while depressing the accelerator pedal. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic who diagnosed the vehicle with coolant intrusion into cylinder #7, causing engine failure. The contact stated that metal shavings were found mixed in with the engine oil. The contact stated that the vehicle was consuming an excessive amount of engine oil. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 110,000.

My 2018 Chevrolet Silverado with a 6.2 engine suffered a Connecting Rod Bearing failure causing the engine to seize/lock up. The engine components are available for inspection. The engine seized/locked up and could have caused a crash. The vehicle is at my mechanics shop right now and will remain there until it is repaired. The vehicle has been inspected by my mechanic but no one else. The engine had developed a "tick" at idle and while driving. My mechanic found a bent pushrod in the engine and then found the engine suffered a camshaft lifter failure. He replaced all the pushrods, camshaft lifters, and the camshaft. It had been repaired and had been driven for a test drive. There were no warnings the engine was going to to fail. The engine just locked up without warning. The engine was removed from the pickup and was then disassembled and found to have had a connecting rod bearing failure on cylinder 7 and cylinder 8.

2018 Chevy Silverado 5.2L with V8 engine equipped with AFM system broke down while accelerating onto a on ramp for the highway going 40 mph. Truck failed to accelerate any faster and a loud knocking noise occurred with a check engine and traction failure light. Safety was put at risk as there was no where to pull off and my truck had no power to it while accelerating onto a very busy interstate. The truck was towed to a Chevy dealership and determined the lifter valves were ticking form both sides and require replacement of them all and the cam shaft.

Driving on the fwy going 73mph While running Transmission stopped working and I’m not able to accelerate to move forward and safely pull over to the shoulder. The problem was not been confirmed by the dealer or service center. The vehicle was not been inspected by anyone. There is no warning lamps Messages, or symptoms of the problem prior to the failure.