2005 Chevrolet Silverado 1500

TL* THE CONTACT OWNS A 2005 CHEVROLET SILVERADO 1500. WHILE DRIVING APPROXIMATELY 5 MPH, THE WIRING HARNESS UNDER THE STEERING WHEEL CAUGHT FIRE AND MELTED. IN ADDITION, THE WINDSHIELD WIPERS STARTED FUNCTIONING INDEPENDENTLY AND THE RADIO STOPPED FUNCTIONING. THERE WERE NO WARNING INDICATORS ILLUMINATED. THE CONTACT STOPPED THE VEHICLE IN THE MIDDLE OF A RESIDENTIAL AREA AND EXITED THE VEHICLE. THE CONTACT'S HUSBAND USED HIS SHIRT TO EXTINGUISH THE FIRE. THE DEALER WAS NOT CONTACTED. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE CONTACT CALLED THE MANUFACTURER AND WAS INFORMED THAT A SPECIALIST WOULD CALL HER BACK. THE APPROXIMATE FAILURE MILEAGE WAS 138,000.

I WAS COMING HOME ON A STATE HIGHWAY TRAVELING 45 MPH I TURNED ONTO MY HOME STREET AND I HAD NO BRAKES. LUCKILY I WAS 200 FEET FROM MY DRIVEWAY AND I COASTED AND TURNED INTO MY DRIVEWAY AND WAS ABLE TO STOP. I HAD IT TOWED TO A GM DEALER AND FOUND OUT ALL MY BRAKE LINES HAD RUSTED OUT. THE MECHANIC COULD NOT GET THE BLEEDER SCREWS OFF THE CALLIPHERS BECAUSE THE SCREWS WERE ALSO RUSTED OUT. WE ALWAYS UNDERCOAT OUR VEHICLES WHEN WE BUY THEM BRAND NEW SO NOTHING WOULD RUST OUT UNDER THERE. IN 2005 WE WERE TOLD BY OUR DEALER THAT IF WE UNDERCOAT WE WOULD LOSE OUR WARRANTY. THE MECHANIC ALSO TOLD US THAT THE NEW BRAKE LINES ARE ALL POLY COATED NOW, SO THEY WON'T RUST OUT ANYMORE. WHY WEREN'T THEY POLY COATED TO BEGIN WITH . THE EXPENSE WAS 1200.00 TO REPLACE THE BRAKE LINES PLUS THE TOWING FEE. THE MECHANIC TOLD US HE SEEN THIS IN 2002,2003,2004,2005 AND 2006 TRUCKS. 2007 HASN'T COME IN YET.

TL* THE CONTACT OWNS A 2005 CHEVROLET SILVERADO. WHILE DRIVING VARIOUS SPEEDS, THE CONTACT HEARD AN ABNORMAL NOISE COMING FROM THE STEERING COLUMN. THE VEHICLE WAS TAKEN TO THE DEALER WHERE THE STEERING COLUMN WAS GREASED, BUT THE ISSUE RECURRED. THERE WERE NO WARNING INDICATORS ILLUMINATED. THE VEHICLE WAS TAKEN TO ANOTHER DEALER WHERE IT WAS DIAGNOSED THAT THE STEERING SHAFT BOLT NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 84,000.

TL* THE CONTACT OWNS A 2005 CHEVROLET SILVERADO 1500. WHEN THE VEHICLE WAS STARTED, THE HEATER FAN ACTIVATED AND AN ODOR OF BURNT PLASTIC EMERGED FROM THE VENTS. THE VEHICLE WAS SHUT OFF AND THEN RESTARTED. THE VEHICLE WAS DRIVEN TO THE CONTACT'S HOUSE. IN ADDITION, THE DIGITAL CLIMATE CONTROL SYSTEM REFLECTED THE ENTIRE TIME AND THE AREA AROUND THE VENTS BECAME REALLY HOT ON THE DASHBOARD. THE VEHICLE WAS NOT DIAGNOSED BY A DEALER OR AN INDEPENDENT MECHANIC. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 152,000.

$ WHEEL DRIVE AUTOTRAC SYSTEM MALFUNCTIONED . BOUNCES BETWEEN 2 WHEEL AND 4 WHEEL DRIVE. THIS HAPPENED ON A CITY STREET. IT HAPPENED TWICE BEFORE 2013 AND 2015 .HAD DEALER DIAGNOSE AND FIX PROBLEM. DID NOT FIX. THERE ARE HUNDREDS OF PEOPLE ON THE INTERNET WITH THE SAME PROBLEM ALL LOOKING FOR HELP AND MOST CANNOT GET PROBLEM RESOLVED BY G.M.

TL* THE CONTACT OWNS A 2005 CHEVROLET SILVERADO 1500. WHEN THE ACCELERATOR PEDAL WAS DEPRESSED, THE VEHICLE STALLED SEVERAL TIMES WITHOUT WARNING. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC, BUT THE CAUSE OF THE FAILURE COULD NOT BE DETERMINED THE CONTACT MENTIONED THAT THE WHEEL SPECIFICATIONS WERE CHANGED TO MATCH THE TIRE SIZE, BUT THE ISSUE STILL PERSISTED. THE MANUFACTURER WAS NOT NOTIFIED. THE VIN WAS INVALID THE FAILURE MILEAGE WAS 39,000. UPDATED 02/08/17*LJ *CN

I HAD JUST DRIVEN TO THE LOCAL WALMART TO GET SUPPLIES BEFORE THE FREEZING RAIN AND ICE GOT HERE. IT WAS 15:50, ABOUT AN HOUSE BEFORE THE FRIDAY NIGHT AFTER WORK CHRISTMAS RUSH WOULD BE RUSHING HOME. AFTER STARTING MY TRUCK, AND LETTING IT WARM A LITTLE SO THE HEAT FROM DEFROSTER WOULD MELT THE ICE AND CLEAR THE FOG ON THE WINDOWS WHICH ENABLES ME TO DRIVE SAFELY. IT IS ALSO AGAINST STATE LAW TO DRIVE WITH UNCLEAR WINDOWS. WELL, TO MAKE A LONG STORY SHORT, MY 5 SPEED MANUAL SELECT BLOWER SWITCH DOES NOTHING. WHEN I BOUGHT THE TRUCK, I TOLD THEM SPEEDS 4 AND 5 DON'T WORK. I KNOW FROM PAST EXPERIENCE THAT THE RESISTORS CAN GO OUT. THEY WOULD NOT FIX. WELL NOW, ALL ARE OUT. I MANAGED TO GET A LITTLE HOT AIR ON WINDSHIELD BUT DECIDED IT WAS UNSAFE TO DRIVE AND RETURNED TO GET TRUCK THE NEXT DAY. AFTER GOOGLING "BLOWER MOTOR FAN RELAY SWITCH" I WAS AMAZED AT HOW MANY PEOPLE HAVE HAD THIS PROBLEM FOR DECADES. BEFORE I RETIRED, I WORKED FOR AT&T AS A TECHNICIAN. WE DEAL WITH CORRODED WIRES AND ELECTRONIC EQUIPMENT DAMAGED BY WATER ON A DAILY BASIS. AFTER REMOVING THE RESISTER MODULE, IT WAS VERY OBVIOUS IT WAS DAMAGED BY WATER. NOT ONLY THAT, IT WAS DESIGNED TO BE PROTECTED FROM WATER BY HAVING TWO SEALS, ONE FOAM, ONE RUBBER BUILT INTO IT. OF COURSE THESE WERE PROBABLY PLACED INTO THE MODULE BY A MACHINE BECAUSE YOU COULD THEY DIDN'T FIT PROPERLY INTO THE SLOTS THEY WERE DESIGNED TO FIT IT. NOT ONLY THAT, THE WIRES THAT WERE SUPPOSE TO BE SODERED (SP) TO THE RESISTORS MUST HAVE BEEN DONE BY A MACHINE AS WELL, YOU COULD SEE THE TWO COMPONENTS WERE PRESSED TOGETHER BY SOMETHING NOT DONE BY A WORKER, AND NO SODER (SP) WAS VISIBLE. ON TOP OF THAT, AFTER TESTING ONE OF THE RESISTORS, WHICH TESTED GOOD., THE WIRE THAT WAS SUPPOSE TO BE MAKING CONTACT WITH THE RESISTER WAS TESTING OPEN, MEANING BAD CONNECTION. WHOEVER MADE THIS MODULE FOR GM IS AT FAULT. THIS IS A FIRE HAZARD. *TR