2005 Chevrolet Equinox

Upon purchasing the vehicle from a buy here pay here they did not enclose any possible or current failures or problems with the vehicle. It started with the battery and within 2 months of purchase the check engine light came on. I had previously taken the vehicle to the dealership 3 times to assess the issue in which they repeatedly informed me nothing was wrong even though my check engine light was still on. A month later my CV axel went out and my alignment begin to come out of place. I took the vehicle to an auto shop in which they gave me an estimate of all the issues wrong with the car. I have since done repairs for what was necessary. I then began to look for a recall on the vehicle in which I found that there was a manufacturer recall that was I repaired regarding the Safety lock theft prevention. My ignition switch does not register properly when it is in “off mode”. The engine still runs and numerous attempts to stop it have failed. I contacted the dealership and they have not been willing to work with me in any way. I called the manufacturer number and was directed to a Chevrolet dealership near me in which they told me there are no recalls even though the NHTSA.gov website states there is as well as numerous others but that they have not been repaired. When I place my vehicle in the park position and remove the key from the ignition I am still able to move the gear shift into any selected gear, both with and without the normal brake and the emergency brake. I cannot afford to take it to a shop for repair but did take it to be inspected and was informed that this was an issue along with others and that it could be the reason my battery is not holding the power it needs and why I cannot remove my key sometimes as well as why the engine remains running after switching to the off position and removing my key.

The contact owns a 2005 Chevrolet Equinox. The contact stated that upon inserting the key into the ignition switch, it failed to function properly. There was no warning light illuminated. The vehicle was taken to the dealer where it was repaired under NHTSA Campaign Number: 04V302000 (POWER TRAIN). However, the failure reoccurred and the vehicle was taken to a second dealer, Countryside Chevrolet (71 Cat Creek Rd, Franklin, NC 28734), where the ignition switch was replaced for a second time under the recall. However, the failure persisted. The contact's daughter was unable to start the vehicle after several attempts. The contact contacted AAA who assisted her daughter to start the vehicle. The contact's daughter was able to continue driving. The manufacturer was notified of the failure but provided no assistance. The failure mileage was approximately 115,000.

The front sub frame where it bolts to the frame was completely rusted loose on the right side. The left side was barely holding on. This is what holds the motor up and control arms. My mechanics are telling me this is a common problem with Chevy Equinoxes. If it's common why aren't there recalls. My car only has 80,000 miles on it and my mechanic told me to scrap it. I'm a fabricator and welder. I welded a new frame under it but others can't do that and mechanics say it's a no fix.

The contact owns a 2005 Chevrolet Equinox. The contact stated that after starting the vehicle, the vehicle remained in LIMP mode. The contact stated that the check engine warning light was illuminated. The vehicle was taken to a local dealer but they are all unable to identify the issue. The manufacturer was not informed of the failure. The failure mileage was approximately 134,000. My 2005 Chevrolet Equinox has been going into limp mode after it's rained for the past 6 to 8 months, with flooding to the floor boards.

I was at the car wash, when the vehicle was near the end, suddenly the engine light and powertrain light came on then shut off automatically. I tried to restart, put the truck in the drive, but it wouldn't go like the gas wasn't reaching. So, I turned it off and restarted to see if the lights would go off, but it didn't. I was able to get it home safely. It doesn't take off right away when you gas the pedal. When I stop at the stop sign, it takes a minute before it starts moving again. This is not safe to drive, especially when making a turn, pulling off to traffic. If it doesn't take off in time, it could be an accident due this problem. I hope there's a solution this problem. Thank you in advance.

It was recently brought to my attention that the keys can fall out of the ignition with the vehicle running. Which creates an extreme likelihood that the vehicle can move forward or backward without assistance. My keys fall right out of the ignition you should not be able to take the keys out of an ignition with it running or not in park. Has not been confirmed by the dealership yet that’s my next step. And yes it can be reproduced at any time. Sometimes the key will not even start the vehicle. Hi had never reached over and just tried to take the keys out of the ignition to see if they would come out but I recently rented a room where the owner has the exact same car and the same thing happened to him and he had the ignition replaced. This is how I know that it happens because he reached over and was able to pull my keys right out with the vehicle running. I was shocked. Also at one point it says there is automatic transmission recall and mine is making weird movements and jerking motions sometimes not just on my car but on my landlord’s car as well. Maybe that needs to be looked at.

WHILE DRIVING I CAN HEAR CLINKING NOISE IN REAR OF CAR. AND IT SOMETIMES FEELS LIKE IT'S DRAGGING MY SPEED DOWN. TO THE POINT WE'RE I CAN GO THREW $20 IN GAS IN 2 DAYS BARELY DRIVING IT. WHEN GOING TO STOP WHEN BREAKING IT PULSATE UNDER FOOT I HAVE BRAND NEW BREAKS ALL AROUND CAN STILL HEAR GRINDING HAS A HARD TIME STOPPING CAN SMELL BREAKS. TOOK IT HAD IT PUT ON MACHINE THEY SAID ABS SENSOR REPLACED THAT PROBLEM STILL PERSISTS. ABS AND TRACTION CONTROL LIGHT WILL NOT GO OFF. BREAKS ARE GETTING WORSE I DON'T FEEL SAFE.