IllustrationSPEEDOMETER FAILURE, IT REGISTERS THE WRONG SPEED ALL THE TIME.
2003 Chevrolet Avalanche 1500
Owner reports · Recalls · Investigations
More warning signs than most Avalanche 1500 years
Owner complaints for the 2003 Chevrolet Avalanche 1500 are substantially higher than the model-year median of 38.
About this comparison →How this year compares
Owner complaints by model year
Compare all Avalanche 1500 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
70–25K
1525–50K
3650–75K
3775–100K
39100–150K
20150K+
154 reports with mileage · 28 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Electrical System. Review the 84 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes. Review the 28 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes, Hydraulic. Review the 24 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
5 crash reports3 fire reports2 injury reports
Electrical System complaints
84 reports2003 CHEVY AVALANCHE SPEEDOMETER FAILS. FUEL GAUGE FAILS. NO WAY TO KNOW HOW FAST YOU ARE GOING. DON'T KNOW HOW MUCH FUEL IS IN VEHICLE. HAVE TO RESET SYSTEM NUMEROUS TIMES THROUGHOUT THE YEAR. DEALER QUOTED $700.00 PLUS TO FIX. PROBLEM STARTED SOON AFTER WARRANTY EXPIRED. TOO MANY FAILURE INSTANCES TO RECALL ACCURATELY…
Read full complaint
2003 CHEVY AVALANCHE SPEEDOMETER FAILS. FUEL GAUGE FAILS. NO WAY TO KNOW HOW FAST YOU ARE GOING. DON'T KNOW HOW MUCH FUEL IS IN VEHICLE. HAVE TO RESET SYSTEM NUMEROUS TIMES THROUGHOUT THE YEAR. DEALER QUOTED $700.00 PLUS TO FIX. PROBLEM STARTED SOON AFTER WARRANTY EXPIRED. TOO MANY FAILURE INSTANCES TO RECALL ACCURATELY. *TR
THE CLUSTER WHICH PROVIDES FOR THE TEMPERATURE GAUGE AND SPEEDOMETER WENT OUT, AND WASHINGTON AND OREGON HAD RECALLS ON THIS, BUT NOT CALIFORNIA, AND I WOULD LIKE TO KNOW WHY IN THOSE STATES AND NOT CALIFORNIA. *AK
SPEEDOMETER DISPLAYS ERRONEOUS SPEEDS. MOST OF THE TIME LESS THAN WHAT THE VEHICLE IS ACTUALLY TRAVELING WHICH CREATES A PUBLIC SAFETY HAZARD. THERE IS NO INDICATION TO THE DRIVER OF A PROBLEM. ALL OTHER INDICATIONS ARE NORMAL. IT WAS NOT UNTIL A GPS WITH SPEED INDICATING CAPABILITY WAS INSTALLED IN THE VEHICLE THAT THE ERR…
Read full complaint
SPEEDOMETER DISPLAYS ERRONEOUS SPEEDS. MOST OF THE TIME LESS THAN WHAT THE VEHICLE IS ACTUALLY TRAVELING WHICH CREATES A PUBLIC SAFETY HAZARD. THERE IS NO INDICATION TO THE DRIVER OF A PROBLEM. ALL OTHER INDICATIONS ARE NORMAL. IT WAS NOT UNTIL A GPS WITH SPEED INDICATING CAPABILITY WAS INSTALLED IN THE VEHICLE THAT THE ERRONEOUS SPEEDOMETER INDICATION WAS KNOWN. FURTHER INVESTIGATION REVEALS THE SPEEDOMETER OPERATES CORRECTLY UNTIL THE DASH/INSTRUMENT PANEL HEATS UP. AT THIS POINT THE INDICATED SPEED CAN GRADUALLY VARY, SOMETIMES DRASTICALLY FROM ACTUAL VEHICLE SPEED UNKNOWING TO THE DRIVER. AFTER REVIEWING THE NHTSA SITE, THIS DOES NOT APPEAR TO BE AN ISOLATED INCIDENT AND BECAUSE OF THE PUBLIC SAFETY IMPLICATION OF A SPEEDING VEHICLE, AT THE MINIMUM I RECOMMEND A NOTICE BE SENT TO ALL CURRENT OWNERS OF THIS TYPE OF VEHICLE ADVISING THEM THIS CONDITION MAY BE PRESENT OR OCCUR IN THE FUTURE. THIS VEHICLE IS CURRENTLY AWAITING REPAIR PARTS.
MY 2003 CHEVY AVALANCHE SPEEDOMETER WITH 49,000 MILES HAS STOPPED WORKING. IT EITHER STICKS AT 40MPH OR REGISTERS 0.
INSTRUMENT CLUSTER WENT BAD AT ABOUT 50,000 MILES SPEEDOMETER GIVES FALSE READING. *JB
THE SPEEDOMETER ON MY 2003 AVALANCHE WENT BAD. IT WOULD WORK FOR A WHILE AND THEN WOULD FAIL TO SHOW THE TRUE SPEED, USUALLY RECORDING 10-20 MPH WHEN I WAS GOING 70. THIS WAS A DAILY OCCURRENCE. I FINALLY HAD IT REPLACED IN FEB, 2006. IT STARTED IN DECEMBER, 2005. *JB
SPEEDOMETER SHOWING 50 MPH AT A COMPLETE STOP. INACCURATE SPEED INDICATION. VEHICLE HAS 54634 MILES ON IT. *JB
SPEEDOMETER NOT INDICATING SPEED, WILL STAY STUCK ON NUMBER AND DO NOT MOVE EVEN WHEN VEHICLE ITS OFF. *JB
SPEEDOMETER FAILURE ON A 2003 CHEVY AVALANCHE. THE SPEEDOMETER IS PEGGED OUT AT TOP SPEED AT A CONSTANT. OCCASIONALLY IT WILL BOUNCE AROUND, BUT IT IS NEVER ACCURATE. *JB
Official recalls
0No recalls in this snapshot.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA11001 · Brake Line Corrosion Failure
Opened Jan 5, 2011 · Closed Apr 8, 2015
Status: closed (inferred from source dates) · Service Brakes, Hydraulic; Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings
On January 11, 2011, ODI opened EA11-001 to investigate allegations of premature brake line corrosion failure in model year (MY) 1999 through 2003 General Motors (GM) full-size pickup trucks and sport utility vehicles sold or registered in the following region of the United States that NHTSA has viewed as salt states for investigations of corrosion related issues:Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia and Wisconsin.The subject vehicles represent the first five MY's of GM's GMT800 platform production, of which approximately 2,038,504 vehicles were sold in salt states (the subject vehicles).The GMT800 platform includes the following vehicles:1999-2007 Chevrolet Silverado and GMC Sierra 1500, 2500 and 3500 series pick-up trucks; 2000-2006 Chevrolet Suburban, Chevrolet Tahoe and GMC Yukon sport utility vehicles; and 2002-2006 Cadillac Escalade and Chevrolet Avalanche sport-utility vehicles.General Motors produced a total of approximately 10,427,062 GMT800 vehicles for sales in the United States, including almost 5 million that were sold in salt states.Although there are over 60 different brake pipe routing configuration used in GMT800 vehicles, with the exception of the rear crossover pipes in MY 200x-2007 vehicles that changed from rear disc to drum brakes, all of the vehicles use brake pipes from the same supplier with a common double-wall, brazed steel pipe design with a combination of hot dip Zinc-Aluminum corrosion protection coating and Aluminum paint outer layer known in the industry as AlGal (ASTM-B750). ODI analysis of field data regarding GMT800 vehicles identified a total of 3,645 complaints of brake pipe corrosion failures, including 107 alleging crashes, and 40 injuries.Though only 20% of total GMT800 production, due to age and region the subject vehicles account for a disproportionate share of the failure experience; with 2,702 of the complaints (75%), 88 of the crashes (82%) and 20 of the injuries (50%) reported in those vehicles.Analysis of the complaints showed strong correlations to vehicle age and region.For vehicles with less than 8 years of service, the complaint rates were minimal for all regions.In the salt states the failure rates begin to climb as the vehicles advance in age, particularly in the Northeast corner of the United States.The complaint rates in the salt states go from less than 0.1 incident per thousand vehicles (IPTV) at 7 years in service to over 1.0 IPTV after the 12th year of service for the subject pickup trucks and utility vehicles.Most of the failures reported to ODI occurred in vehicles with more than 10 years in service.ODI?s investigation did not identify any specific defect conditions that were causing or contributing to the brake pipe failures.Nor did the analysis isolate the problem to any subject vehicle sub-populations when analyzed by vehicle type or production range.The investigation found that vehicles experiencing brake pipe corrosion failures were likely to have general patterns of excessive corrosion on the majority of the brake pipe assembly and appear to be occurring due to expected wear out for the brake pipe coating material used in the subject vehicles and the environmental conditions in severe corrosion states.A safety-related defect has not been identified at this time.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will monitor t
Additional source detail variants (2)
Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings
On January 11, 2011, ODI opened EA11-001 to investigate allegations of premature brake line corrosion failure in model year (MY) 1999 through 2003 General Motors (GM) full-size pickup trucks and sport utility vehicles sold or registered in the following region of the United States that NHTSA has viewed as salt states for investigations of corrosion related issues:Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia and Wisconsin.The subject vehicles represent the first five MY's of GM's GMT800 platform production, of which approximately 2,038,504 vehicles were sold in salt states (the subject vehicles).The GMT800 platform includes the following vehicles:1999-2007 Chevrolet Silverado and GMC Sierra 1500, 2500 and 3500 series pick-up trucks; 2000-2006 Chevrolet Suburban, Chevrolet Tahoe and GMC Yukon sport utility vehicles; and 2002-2006 Cadillac Escalade and Chevrolet Avalanche sport-utility vehicles.General Motors produced a total of approximately 10,427,062 GMT800 vehicles for sales in the United States, including almost 5 million that were sold in salt states.Although there are over 60 different brake pipe routing configuration used in GMT800 vehicles, with the exception of the rear crossover pipes in MY 200x-2007 vehicles that changed from rear disc to drum brakes, all of the vehicles use brake pipes from the same supplier with a common double-wall, brazed steel pipe design with a combination of hot dip Zinc-Aluminum corrosion protection coating and Aluminum paint outer layer known in the industry as AlGal (ASTM-B750). ODI analysis of field data regarding GMT800 vehicles identified a total of 3,645 complaints of brake pipe corrosion failures, including 107 alleging crashes, and 40 injuries.Though only 20% of total GMT800 production, due to age and region the subject vehicles account for a disproportionate share of the failure experience; with 2,702 of the complaints (75%), 88 of the crashes (82%) and 20 of the injuries (50%) reported in those vehicles.Analysis of the complaints showed strong correlations to vehicle age and region.For vehicles with less than 8 years of service, the complaint rates were minimal for all regions.In the salt states the failure rates begin to climb as the vehicles advance in age, particularly in the Northeast corner of the United States.The complaint rates in the salt states go from less than 0.1 incident per thousand vehicles (IPTV) at 7 years in service to over 1.0 IPTV after the 12th year of service for the subject pickup trucks and utility vehicles.Most of the failures reported to ODI occurred in vehicles with more than 10 years in service.ODI?s investigation did not identify any specific defect conditions that were causing or contributing to the brake pipe failures.Nor did the analysis isolate the problem to any subject vehicle sub-populations when analyzed by vehicle type or production range.The investigation found that vehicles experiencing brake pipe corrosion failures were likely to have general patterns of excessive corrosion on the majority of the brake pipe assembly and appear to be occurring due to expected wear out for the brake pipe coating material used in the subject vehicles and the environmental conditions in severe corrosion states.A safety-related defect has not been identified at this time.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will monitor t
Service Brakes, Hydraulic
On January 11, 2011, ODI opened EA11-001 to investigate allegations of premature brake line corrosion failure in model year (MY) 1999 through 2003 General Motors (GM) full-size pickup trucks and sport utility vehicles sold or registered in the following region of the United States that NHTSA has viewed as salt states for investigations of corrosion related issues:Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia and Wisconsin.The subject vehicles represent the first five MY's of GM's GMT800 platform production, of which approximately 2,038,504 vehicles were sold in salt states (the subject vehicles).The GMT800 platform includes the following vehicles:1999-2007 Chevrolet Silverado and GMC Sierra 1500, 2500 and 3500 series pick-up trucks; 2000-2006 Chevrolet Suburban, Chevrolet Tahoe and GMC Yukon sport utility vehicles; and 2002-2006 Cadillac Escalade and Chevrolet Avalanche sport-utility vehicles.General Motors produced a total of approximately 10,427,062 GMT800 vehicles for sales in the United States, including almost 5 million that were sold in salt states.Although there are over 60 different brake pipe routing configuration used in GMT800 vehicles, with the exception of the rear crossover pipes in MY 200x-2007 vehicles that changed from rear disc to drum brakes, all of the vehicles use brake pipes from the same supplier with a common double-wall, brazed steel pipe design with a combination of hot dip Zinc-Aluminum corrosion protection coating and Aluminum paint outer layer known in the industry as AlGal (ASTM-B750). ODI analysis of field data regarding GMT800 vehicles identified a total of 3,645 complaints of brake pipe corrosion failures, including 107 alleging crashes, and 40 injuries.Though only 20% of total GMT800 production, due to age and region the subject vehicles account for a disproportionate share of the failure experience; with 2,702 of the complaints (75%), 88 of the crashes (82%) and 20 of the injuries (50%) reported in those vehicles.Analysis of the complaints showed strong correlations to vehicle age and region.For vehicles with less than 8 years of service, the complaint rates were minimal for all regions.In the salt states the failure rates begin to climb as the vehicles advance in age, particularly in the Northeast corner of the United States.The complaint rates in the salt states go from less than 0.1 incident per thousand vehicles (IPTV) at 7 years in service to over 1.0 IPTV after the 12th year of service for the subject pickup trucks and utility vehicles.Most of the failures reported to ODI occurred in vehicles with more than 10 years in service.ODI?s investigation did not identify any specific defect conditions that were causing or contributing to the brake pipe failures.Nor did the analysis isolate the problem to any subject vehicle sub-populations when analyzed by vehicle type or production range.The investigation found that vehicles experiencing brake pipe corrosion failures were likely to have general patterns of excessive corrosion on the majority of the brake pipe assembly and appear to be occurring due to expected wear out for the brake pipe coating material used in the subject vehicles and the environmental conditions in severe corrosion states.A safety-related defect has not been identified at this time.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will monitor t